Suntime LYSC07 User manual

１
Double Glider Instructions (LYSC07)
Before assembly please refer to the parts list below to ensure all parts are correct.
Please retain for future use.
Warnings:
This product is not for commercial use
Keep children away during assembly. This item contains small parts which can be swallowed
by children.
Parts List:

２
Assembly Guide:
I) Attach parts S to parts E and E1 using bolts #V
II) Attach parts T to part U, use screws W, repeat until 2 sections completed.
Attach part D to part U
III) Attach assembled parts to the base frame, use bolts R and add parts K and L
These should now swing freely on the base frame.
IV) Build seat section by attaching arms to cross bars, attach G and F bars to the arm using
bolts I

３
V) Place seat onto the seat frame.
VI) Attach seat frame using bolts X or N, refer to diagram, ensure the spacer washer H is
between the seat and the arms.
VII) Place frame legs over the centre bar of the seat.
VIII)Connect seat frame to the sub frame by attaching to the swing arms. Refer to diagram for
details.
Imported by Trans-Continental Group Limited, Blackpool FY4 2RP

４
Please keep these instructions for future reference. If for any reason you are not satisfied with this product
contact [e-mail]
Spare Parts
Please note we stock the below spare parts should they be missing from your item on receipt. If the item
has a major fault or fundamental flaw please return to the place of purchase, otherwise visit our website
Suntime-spares.co.uk to order the parts.
Part D
Part H
Part I
Part J
Part K
Part L
Part M
Part N
Part Q
Part R
Part U
Part V
Part W
Part X