SUP’AIR WALIBI 3 User manual

SUPAIR SAS
PARC ALTAÏS
34 RUE ADRASTÉE
74650 ANNECY CHAVANOD
FRANCE
RCS 387956790
User’s manual
WALIBI 3
Revision index : V1 23/06/2020
English

WALIBI 3 | page 2
Harness User’s manual | WALIBI 3 Thank you for choosing the WALIBI 3. We
are glad to be able to share our common
paragliding passion with you.
SUPAIR has been designing, producing and
selling free flying equipment since 1984. By
choosing a SUPAIR product you benefit from
almost thirty years of expertise, innovation
and listening. This is also our philosophy :
working endlessly to develop better pro-
ducts and to maintain a high quality produc-
tion.
We hope you will find this user’s manual
comprehensive, explicit and hopefully en-
joyable as well. We advise you to read it ca-
refully.
You will find the latest up to date information
about this product on our website
www.supair.com.
If you have any further questions, feel free
to ask one of our retailers for answers. And
naturally, the entire SUPAIR team is at your
disposal on [e-mail].
We wish you many safe enjoyable flying
hours, and happy landings
Team SUPAIR

WALIBI 3 | page 3
Harness User’s manual | WALIBI 3 LIST OF CONTENTS
Introduction 4
Technical specifications 5
Size choice 6
Nomenclature 7
Harness Overview 8
Accessories assembly 9
Carabiners 9
Neoprene sleeve 9
Backrest protection 11
Bumpair 12
Installing the reserve parachute 13
Reserve parachute characteristics 13
POD reserve parachute handle connection 13
Parachute risers – harness connection 14
Place the risers inside the neoprene sleeve 16
Place the risers inside the sleeve 17
Riser connection – reserve parachute 18
Installing the reserve parachute in the container 19
Locking the reserve parachute handle 26
Gear packing and tips 28
Adjustments 29
The various adjustments 29
Adjusting the harness 30
Wing/harness Connection 31
Flight phases 32
Pre-Flight check 32
Take-off 32
In flight 33
Landing 33
Using the reserve parachute 34
Towing 34
Mandatory controls 34
In case of an incident 35
Maintenance 36
Harness cleaning and maintenance 36
Storage and transport 36
Product longevity 36
Repairs / spare parts 37
Materials 37
Recycling 37
Warranty 38
Disclaimer 38
Pilot’s gear 38
Shock Absorber 39
Service Book 40

WALIBI 3 | page 4
Harness User’s manual | WALIBI 3 INTRODUCTION
Welcome to the world of paragliding according to SUPAIR, a world of shared passion.
The Walibi 3 harness is aimed at professional pilots and flying enthusiats. Comfort, lightness and
durability dictated its design and the materials chosen by our R&D team.
The WALIBI 3 harness was certified EN 1651: 2018 and LTF Nfl II 91/09. Indicating that it meets
European and German safety requirements.
After reading this manual, we suggest you to check your harness in static hang-posts to adjust it
before your first flight.
N.B : Three important icons will help you when reading this manual :
Advice Caution ! Danger !!

WALIBI 3 | page 5
Harness User’s manual | WALIBI 3 TECHNICAL SPECIFICATIONS
Harness size SM L
Pilot size (cm) 160-180 175-200
Pilot weight (mini - maxi) (kg) 60 - 85 80 -120
Harness weight (+ carabiners+speedbar)(kg) 3,15 3,19
Designed for Tandem ( pilot )
A Back lenght (cm) 63 70
BBackrest tilt adjustment (cm) 32 36
C Seat length (cm) 46 49
D Carabiners height (cm) 42 45
E Carabiners distance (cm) 45 48
Impact damping system BUMPAIR
Certification EN 1651 : 2018 - LTF Nfl II 91/09
Tandem (Pilot or Passenger) Pilot
Towing No
Quick-out carabiners compatibility No
Reserve parachute pocket volume (liter) 10,4
A
B
C
DE
A
B
C
D
E
Back lenght
Backrest tilt adjustment
Seat length
Carabiners height
Carabiners distance

WALIBI 3 | page 6
Harness User’s manual | WALIBI 3 SIZE CHOICE
Taille
Poids 1m60 1m65 1m70 1m75 1m80 1m85 1m90 1m95 2m00
50
55 SM SM
60 SM SM
65 SM SM SM SM
70 SM SM SM SM SM
75 SM SM SM SM SM L
80 SM SM SM L L
85 SM L L L L
90 L L L L L L
95 L L L L L
100 L L L L
110 L L L L
120 L L L L
Choosing your harness size is important. You will find here below a height/weight table that will help you in your size choice. With its hammock ar-
chitecture and its “lying flat” flying position, we advise you to try out the harness under a hanging device at one of our retailers in order to choose the
correct size.
For a complete list of our retailers, please click here : www.supair.com
Preliminary test under hanging device

WALIBI 3 | page 7
Harness User’s manual | WALIBI 3 NOMENCLATURE
1
2
3
4
Pre-cut parachute risers sleeves
TANDEM DYNEEMA PARACHUTE
RISERS
(réf. : ELEBIY)
Options
5POWI3 reserve parachute handle
Bumpair WI3
Camera pocket
6
Harness
2x 45 mm Zicral self-locking cara-
biners
3
4
2
1
5
6

WALIBI 3 | page 8
Harness User’s manual | WALIBI 3
8
9
4
10
35
7
11
1
6
2
7
12
12
HARNESS OVERVIEW
1
2
3
4
5
6
7
Cobra © buckles (chest & legs)
9
10
8
Shoulder strap adjustment
11
Backrest angle adjustment
Reserve parachute pocket
Small storage pocket
Back storage pocket
Paragliding main hooking points
Reserve parachute handle
Bumpair
Backrest protection
Camera pocket
Lumbar support adjustment
12

WALIBI 3 | page 9
Harness User’s manual | WALIBI 3 ACCESSORIES ASSEMBLY
Neoprene sleeve :
45 mm Self-locking zicral carabiners
Compatible carabiners :
Réf. : MAILCOMOUS45
Tearable neoprene sleeveCarabiners
Pass the carabiners through the 2
main attach points
Réf. : GAINEELEVW3
How to set up the shoulder straps inside the sleeve
1. Detach the shoulder strap

WALIBI 3 | page 10
Harness User’s manual | WALIBI 3 ACCESSORIES ASSEMBLY
Tearable neoprene sleeve
2. Insert the sleeve 3. Take out the comfort chest strap
4. Attach the shoulder straps and do the same on the other side3. Take out the shoulder strap

WALIBI 3 | page 11
Harness User’s manual | WALIBI 3 ACCESSORIES ASSEMBLY
How to install the sleeves on the spreader bars
1. Connect the spreader bars to the Walibi 3
Tearable neoprene sleeve
2. Install the sleeve on the spreader bar
Backrest protection
1. Open the dorsal pocket zip 2. Insert the back protection and close the zip
Install the backrest protection

WALIBI 3 | page 12
Harness User’s manual | WALIBI 3 ACCESSORIES ASSEMBLY
BUMPAIR
Bumpair WI3 Réf. : PROBUMPW3
Compatible BUMPAIR :
Bumpairs assembly
1. Fold the harness at the neoprene cap level
2. Open the zip
3. Slide the 2 bumpairs in
4. Fasten the zip

WALIBI 3 | page 13
Harness User’s manual | WALIBI 3 INSTALLING THE RESERVE PARACHUTE
Thank you for reading the following carefully ! We recommend for the initial rescue parachute assembly and installation to be made
by a qualified professional.
Reserve parachute folding and installation inside the harness must conform to the specific guidelines found in this manual.
Connecting the handle to the POD
• Panels locked via cables
• Maximum volume 10,4 liters
• Adapted to all SUPAIR reserve parachutes
Rescue parachute pocket characteristics
1 2
If you have a large reserve
parachute, and feel a slight
resistance during the pod
extraction hang-test, con-
nect the reserve parachute
handle to the side loop in-
stead.
Fasten the reserve parachute handle bridle to the
external pod loop via a Lark’s head knot connection.
Tighten the handle/POD
connection securely.

WALIBI 3 | page 14
Harness User’s manual | WALIBI 3
INSTALLING THE RESERVE PARACHUTE
Riser/Harness connection
Open the velcro located on the spreader bars to access the parachute’s attach points.
>> Access to the reserve parachute connection points.

WALIBI 3 | page 15
Harness User’s manual | WALIBI 3
INSTALLING THE RESERVE PARACHUTE
Riser/Harness connection
Connect each riser to a spreader bar using a squared Maillon Rapide® and O-ring.
- Open the 7mm mail-
lon Rapide®
- Push the toric ring
through the Maillon
Rapide® and twist it.
1
- Push the bridle con-
necting point through
the toric ring loop
- Push the Maillon
Rapide® through the
bridle connection loop.
2
- Give the toric ring a
second twist
3
- Push the bridle
through the Maillon
Rapide®
4
- Close the maillon Rapide® by hand,
then tighten using a set of pliers and
making a 1/4 turn.
- Repeat the procedure with the second
bridle connection loop.
5
Fastening the risers to the harness with a set of 7mm square Maillons Rapides®.

WALIBI 3 | page 16
Harness User’s manual | WALIBI 3 INSTALLING THE RESERVE PARACHUTE
Place the risers inside the neoprene sleeve.
1Pass the right-hand riser inside tearable neoprene sleeve along the speader bar then the Maillon Rapide’s and finally the shoulder straps.
2Repeat the same process for the riser located on the left.

WALIBI 3 | page 17
Harness User’s manual | WALIBI 3 INSTALLING THE RESERVE PARACHUTE
Place the risers inside the sleeve
1Pass the risers through their respective shoulder sleeve.
2- Place the risers inside their guiding sleeve connected alongside the harness and bring them out through the reserve parachute container
- Use the Velcro to close the sleeve

WALIBI 3 | page 18
Harness User’s manual | WALIBI 3 INSTALLING THE RESERVE PARACHUTE
Reserve parachute/risers connection
One (1) square 7mm Maillon Rapide® will be needed + two (2) flexible toric rings.
1 2 4
5
3
- Open the 7mm square
Maillon Rapide®
- Push the maillon through
the risers loops
- Push the maillon through
the plastic ring
- Twist
- Give a second twist to
the plastic ring.
- Push the buckle through
the maillon.
- Push the riser end
through the toric ring loop.
- Push the maillon through
the riser loop
-Tidy up the assembly.
- Be certain for the riser end loops to be securely
fastened.
- Close the Maillon Rapide® tightly by hand.
- Tighten using pliers and making a ¼ turn.

WALIBI 3 | page 19
Harness User’s manual | WALIBI 3
INSTALLING THE RESERVE PARACHUTE
Installing the reserve parachute in its container
1Place the reserve parachute inside the reserve parachute poc-
ket with the handle on the right side.
Thank you for reading the following carefully ! We re-
commend for the initial rescue parachute assembly and
installation to be made by a qualified professional.
Reserve parachute folding and installation inside the
harness must conform to the specific guidelines found
in this manual.

WALIBI 3 | page 20
Harness User’s manual | WALIBI 3 INSTALLING THE RESERVE PARACHUTE
Installing the reserve parachute in its container
2
Pass the folding rod through the loops number 3 and 4
3
- Using the rod, pass the loops 3 and 4 through the gommets
- Store the side ears in their place