Supera M2300 User manual

Wall Mount Anesthesia Machine
M2300 Stationary Mount
M2500 Articulating Arm
(Shown With Optional Equipment)
Operators Manual
Supera, LLC Copyright 2022
For Veterinary Use Only

TABLE OF CONTENTS
Machine Assembly Page
Dimensions
Mounting
Attaching the O2 supply
Breathing circuits
Waste Gas Evacuation
Technical Information
Diagram and Part Numbers
Ordering information
Warranty /Return
Machine & Service notes

Chapter 1: Dimensions

IMPORTANT
The bracket should be mounted into a solid wall stud or back board
The mounting holes are on 16” centers (standard wall stud distance)
Use lag screws (5/16” or 3/8”) to mount to the wall
Chapter 1: Mounting

Oxygen Connection
Attach your green oxygen hose to the back of the ow meter.

The Non–rebreathing system connects to the common gas outlet of the
anesthesia machine.
1. Disconnect the common gas outlet from the rebreathing head. (quick dis-
connect ttings)
2. Plug the 15mm male connector from the non–rebreathing system into the
common gas outlet of the anesthesia machine.
3. Connect the blue exhaust port on the bag of the non–rebreathing system to
the 19mm blue evacuation tubing connected to the waste gas interface device
or to any other waste gas evacuation device (outside air, F–air canister, etc.)
Circuits
CIR518 - Non-Rebreathing Modied Jackson-Rees
Common
Gas Outlet

Unilimb design removes clutter and disorder from the anesthesia eld.
Patients exhaled breath acts as a thermal wrap to maintain the tempera-
ture and humidity of inspired gases. The swivel connector at the patient
end eliminates kinking of the tubing.
This circuit attaches to the “Inhalation” and “Exhalation” ports on the
rebreathing head (Co2 Absorber)
P/N CIR529 Adult (blue inner tube)
Recommended for Patients weighing above 20kg
P/N CIR529P Pediatric (Pink inner tube)
Recommended for Patients weighing under 20kg
Circuits
CIR529 & CIR529P Rebreathing Unilimb circuits

Waste Gas Evacuation
Optional waste gas interface valve
P/N EVC630 for use with fan based
evacuation systems like our EVC3000
Optional waste gas interface valve
P/N EVC629 for use with vacuum pump
based evacuation systems like our
EVC3100

Warranty / Return Policy
Supera Anesthesia Innovations warrants that each product or part shall be free
from defects in workmanship and materials, under normal use and with appropri-
ate maintenance, for 10 (ten) years from the date of purchase. For plastic, rubber
and disposable parts or items, Supera Anesthesia Innovations warrants only that
each such part and item shall be free from defects in workmanship and materials
at the time of delivery.
This warranty shall be void for any product that has been altered, defaced or re-
moved from the original Supera Anesthesia Innovations product.
Supera Anesthesia Innovations shall not be liable for any damage, injury or loss
arising out of the use of the product, whether as a result of a defect in the prod-
uct or otherwise, if, prior to such damage, injury or loss, the product was (1)
damaged,misused, or misapplied; (2) repaired, altered or modied by persons
other than Supera Anesthesia Innovations; (3) not installed in strict compliance
with the applicable codes and ordinances; (4) not installed by Supera Anesthesia
Innovations or an authorized Supera Anesthesia Innovations dealer.
UNDER NO CIRCUMSTANCES SHALL SUPERA BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES AS THOSE TERMS ARE
DEFINED IN THE UNIFORM COMMERCIAL CODE.
All items returned for service or repair are the responsibility of the customer.
Proper packing methods should be used in returning items to Supera Anesthesia
Innovations.

SHIPPING POLICY
1. Do Not Sign The Bill Of Lading Until You Have Inspected The Box Or Crate
2. Examine the box AS it is delivered and BEFORE the truck/driver leaves.
3. If there is any evidence of damage when it arrives, note it in detail with the phrase “possible
concealed damage” on the bill of lading and immediately call the o󰀩ce for instructions before the
truck/driver leaves if at all possible.
4. If there is obvious damage such as a hole in the box, a crushed box, etc., refuse the shipment.
The product will then go back to the freight company’s terminal where they are entirely respon-
sible.
5. Open and inspect your product as soon as possible. DO NOT WAIT.
6. If you nd damage, take as many photographs of everything as soon as you can and email
them to [email protected]
7. Note: unless the following procedures are followed correctly and we are notied within ten (10)
days, SUPERA LLC cannot accept any responsibility for the problems that may ensue.
DO NOT RETURN ANY DAMAGED GOODS TO SUPERA LLC WITHOUT
PRIOR AUTHORIZATION OF SUPERA LLC AND THE CARRIER.
KEEP ALL PACKAGING!
DO NOT RETURN ANY DAMAGED ITEMS UNTIL SHIPPING
INSTRUCTIONS ARE RECEIVED.
ALL CLAIMS MUST BE FILED WITHIN TEN (10) DAYS OF
RECEIPT OF GOODS.
IF YOU HAVE ANY QUESTIONS CONTACT SUPERA DIRECTLY
AT 503-723-5068

DOCUMENTATION
Date purchased:
Purchased from:
Machine serial number:
Vaporizer serial number:
Machine service information
Service Date:
Service information:
Service Date:
Service information:
Service Date:
Service information:

MADE IN
oREGON, uSA
since 1993
[phone] or [phone] toll-free
E-Mail: [e-mail]
1220 NW Noble Drive, Estacada OR 97023
www.SuperaVet.com