Ferno 11-T Stretcher User manual

Model 11-T Stretcher
User Manual
Language:
English
Language:
English

2
1. Intended Use of Model 11-T Stretcher
The Ferno Model 11-T Stretcher is designed to aid in the transportation of deceased
patients using an innovative track system that allows removal down stairs with ease and
extra control.
Standard features include:
Sturdy and lightweight with two front wheels for easy manoeuvring
Narrow track-to-ground clearance provides easier manoeuvrability over all surfaces
even with tracks deployed.
Folds in half for ease of storage and carrying
Legs fold out of the way when not needed
Comes with quick release retaining straps
Now comes complete with footrest
Each user should read these instructions and practice the procedures of use before actually
placing the stretcher in service.
Establish regular maintenance procedures and responsibilities to ensure proper
maintenance as described in this manual.
Retain this manual for future reference. Include it with the stretcher in the event of transfer
to new owners or users.

FERNO/MAN/09/12/203/UK 3
2. Checking the Model 11-T Stretcher
Before the start of each day it is recommended that the following checks be made:
1. Does the stretcher have securely installed restraints?
2. Check the cover for any damage; if any is found it must be replaced.
3. Ensure the leg posts and wheels fold out and lock in place.
4. Check that the hinge mechanism locks in place.
5. Check all castings and stretcher frame for cracks or damage.
6. Study this manual before use. Practice without any weight until totally competent
in using the stretcher.
Once these checks have been completed, then the stretcher is ready to use in regular
service.
SAFE WORKING LOAD
159 kg
This product must be regularly serviced and maintained to ensure satisfactory
operation.
We recommend that the stretcher is serviced at the same intervals as the vehicle.
Regular cleaning helps reduce the risk of transmitting disease and enables
the equipment to function at its optimum.
WARNING
Trapping hazards cannot be eliminated due to the operation of this product.
EXTRA CARE is to be taken whilst folding and unfolding the stretcher.

FERNO/MAN/09/12/203/UK 4
3. Operating Procedure
General Principles
All persons who will control the use of this stretcher must ensure that the following
procedures are complied with:
1. Control the stretcher at all times.
2. Keep the body secure using restraints.
3. Use help when needed to ensure operator safety.
Transferring onto a stretcher
Unfold the stretcher.
Ensure the stretcher fully unfolded and locked in place.
Place the stretcher beside the body and open the restraints.
Transfer the body onto the stretcher using recognised procedures.
Close the restraints around the body.
Make adjustments as necessary.
Use in a Vehicle
When a body is to be transported on the stretcher in a vehicle, both the deceased
patient and the stretcher should be placed on a trolley, the trolley restraints should be
fastened around the body and the stretcher to prevent movement in any direction, and
the trolley should be secured to the vehicle by means of an approved fastener.
However, if the patient/stretcher must be placed on the floor or squad bench,
provision must be made to contain movement under all transport conditions the
vehicle is designed to withstand. Post cups or other openings in the vehicle floor alone
are not enough to properly secure the stretcher. Additional devices to contain
movement of this type are the responsibility of the user of ambulance manufacturer to
design, test and install.

FERNO/MAN/09/12/203/UK 5
Unfolding and Folding the stretcher.
Unfolding:
The stretcher folds from end to end. Grasp the frame and fold/unfold as shown and unfold
the footrest. The stretcher will automatically lock into position.
The legs and wheels can be folded by pressing the lock button in, then folding the
leg/wheel inward until the lock button engages, locking the leg or wheel into position.
Folding:
To fold the stretcher for storage or transport, squeeze the two catches together in a
pinching action. The catches are located on the underside of the stretcher as shown in Figs
A & B
The stretcher will now fold. (As shown in Figs C, D, E). Fold away the foot rest.
Figure A
Figure B
Figure C
Figure D
Figure E

FERNO/MAN/09/12/203/UK 6
To Carry the stretcher over rough or uneven ground
Attendants should lift the stretcher by grasping the stretcher frame at the corners. One
attendant at each end can often carry the body and stretcher for short distances over level
surfaces. Extreme weight, long distance or rough terrain may increase the number of
attendants required for safe movement.
Restraints
Each stretcher is equipped with three restraint straps that should be used at all times. Each
strap has loops so that they can be easily attached to the stretcher frame. Buckle the straps
across the chest, thighs and ankles to secure the body.

FERNO/MAN/09/12/203/UK 7
Manoeuvring the stretcher
When manoeuvring the Model 11 stretcher on flat ground the track must be in the stowed
position. To stow the track press down the lever located on the underside of the stretcher
until the track is flat against the stretcher. (Fig 1)
To roll the stretcher, lift the stretcher until the wheels at the underside of the footend of
the stretcher are in contact with the ground. Whilst rolling the stretcher in this position,
always observe for any obstacles that may be on the ground. (Fig. 2)
Practice steering and moving the stretcher with a prior to putting the unit into operation.
Manoeuvring the stretcher down stairs
To open the track for decent down stairs, hold the stretcher upright and place your foot on
the bar of the track, push downwards until the track locks into place. (Fig. 3)
Place the stretcher at the top of the stairs with the track resting on the top step and slowly
descend the stairs in a controlled manner, keeping the track in contact with the stairs. (Figs
4, 5, 6) Ferno UK Ltd advises that two operators may be needed for heavy loads.
To turn the stretcher on a landing or at the bottom of the stairs lift the stretcher so it is
resting on the two wheels placed at the front of the footend of the stretcher. Holding on to
the frame of the stretcher you will now be able to turn the stretcher in the direction you
require in a confined space. (Figs 7, 8, 9). Continue with the transportation.
Figure 2
Figure 3
Figure 4
Figure 5
Figure 7
Figure 9
Figure 8
Figure 1
Figure 6

FERNO/MAN/09/12/203/UK 8
5. Cleaning and Lubrication
Cleaning
Regular cleaning helps reduce the risk of transmitting disease and enables equipment
to function at its optimum.
Steam cleaning with a suitable cleaning additive is the most effective method. The
same results may be achieved by using a sponge and mild detergent soap mixed in
warm water. For particularly grimy cases, especially if the stretcher has been in storage
for a long period, it may be necessary to first wash the stretcher with a solvent soaked
rag prior to using soap and water.
Once cleaned, dry the stretcher with a soft towel, paying particular attention to swivel
and sliding joints. If a compressed air hose is available, you may find that compressed
air jets are more effective in drying the hard-to-reach places. Once the stretcher is dry,
you may wish to apply a liquid car wax to polished surfaces.
Lubrication
Your Model 11-T Stretcher will work efficiently and safely only when it is well
lubricated. You MUST lubricate all moving and sliding parts after every inspection or
preventative maintenance programme, or if there is inadequate lubrication for the
moving parts to operate easily and quietly.
In general terms, almost all sliding and moving parts may be lubricated with a light duty
grease. A penetrating fluid lubrication is used on some sliding parts of the stretcher.
However, when a penetrating fluid lubricant is used, all excess MUST be wiped away, to
prevent any build-up of dust or grime that can clog up working parts and impede
movement.
Alternatively, contact the Ferno (UK) Ltd Fieldcare Department at the address on page
6 of this manual.

FERNO/MAN/09/12/203/UK 9
6. Warranty and Service
Ferno's standard terms and conditions apply to all sales. A copy is available upon request.
These contain full details of warrant terms and do not limit the statutory rights of the
customer.
For service, maintenance and any questions regarding this, or any other Ferno product,
please contact:
Ferno (UK) Limited
Ferno House
Stubs Beck Lane
Cleckheaton
West Yorkshire
England
BD19 4TZ
Telephone: [phone]
Fax: [phone]
or your local distributor.
Date
Service By
Remarks

FERNO/MAN/09/12/203/UK 10
7. Technical Data
Product Name:
Model 11-T Stretcher
Overall Length:
1915 mm
Overall Width:
Length Folded:
Depth Folded
490 mm
920 mm
215 mm
Height:
180 mm
Weight:
10.5 kg
Load Capacity:
159 kg
Construction Materials:
Aluminium Tubing
Aluminium Castings
UV Stabilised Flame Resistant Polypropylene