Supereyes N004 User manual

1 / 6
Digital Borescope N004
Applications:
 automobile generator inspection
 tube inspection
 industry inspection, i.e. micro hole or cavity etc.
 mark and physic evidence reconnaissance
 termites inspection
 others
Specifications:
Model Magnification Resolution Diameter Focus Measurement Lig t Video
Frame
Output
N004 1-200X 640*480 7mm Manual
Focus
Lengt ,Arc
lengt ,Angle
LED 15-30FPS USB2.0
Work Platforms:
 Windows 98SE/Me/ 000/XP,Win98/98SE/VISTA
 XP/VISTA don’t need a drive program
 Pentium 33MHz  processor or senior than it.
 56MB SDRAM internal storage
 USB .0 interface
 600MB available HD space
Hardware install and use
1

 move the borescope to a suitable place for observing the object
2

 revolve the knob above USB to adjust lighting
3

 revolve the end knob until image become clear.

2 / 6
Warn and notice!
1. Don’t touch the lens and LED with your hand as it may be dangerous
or destroy the lens.
. Don’t dismantle the product which can lead to malfunction or electric
shock accident.
3. Don’t pull out the plug or other interface with damp hands .
4. Don’t link other plug to the product which may lead to accidents.
5. Don’t clear the product with alcohol or organic dissolvent.
6. If the lens or viseur becomes dirty, you’d better use dry non-gunny
cloth or special lens paper to clear. don’t touch the lens with hands which
may produce scraping marks on its surface. don’t apply force when clear
it.
7. This product is designed for indoor use therefore avoid exposing in the
open air. Lens damage can come from overhigh temperature and
dampness.
8. favorable use environmenttemperatureO°C ~ 40°C relative
dampness45% ~ 85%

3 / 6
9. If foreign matter or water permeated into borescope or pull out the
USB immediately and send to maintain center, no dry it with hair dryer.
10.When using the USB ware, avoiding people’s being stumbled or
borescope’s falling by USB.
11. To avoid possible electric shock accidents, break off the power before
remove the computer or display.
Solution of malfunction
No
Malfunction
eg.
Possible reasons Solution
1
Image black
screen
Lighting malfunction
Didn’t open the preview
Choose wrong device
Didn’t connect
well with PC
Turn on the light
Open the preview
Choose suitable device
Reconnect USB
interface
Image being
Vague 
discolorlow
frame rate
Dirty lens
Wrong focal distance
Didn’t connect well with PC
Lower PC configuration
Click the lens
Adjust focal distance
Reconnect US interface
Change to another PC
3
Image
distortion
Didn’t connect well with PC
Endoscope malfunction
Reconnect USB
interface
Return to the factory to
maintain

4 / 6
4
Image
flashing
Wrong frame rate
Choose the same frame
rate with ur residence
town
5
Can’t be
recognized
Didn’t connect well with PC
Endoscope malfunction
Reconnect USB
interface
Return to factory to
maintain
6
Pointx: slow
reactionno
reaction
Climate factor
Endoscope malfunction
Add dampness of
pointx
Return to factory to
maintain
7
Adjust
focusing
failed
Snake tube overbend
Straighten the tube
Return to factory to
maintain
Certifications

5 / 6
Disclaimer
This product’s manufacturer and retailer won’t be responsible for any
products damage results from improper use. This instruction book’s

6 / 6
contents are synchronous with current products. Manufactured by D&F
Corp. we won’t be responsible for any error in contents because products
update. Meanwhile we don’t undertake the obligation of update text
content and information.