Supereyes B011 User manual

1 / 5
B011 User Guide
Thanks for purchasing portable digital microscope!
This digital microscope is widely used in many areas, such as:
• Industrial inspection, printed circuit board, precision machinery inspection, CNC
lathe installation monitoring, etc.
• Inspection of cultural relics, gemstones, calligraphy and paintings, security codes
• Long distance micro focus
• Product appearance inspection
It is easy to use. With Supereyes software, you can take photo, record video and measure
freely.
To use the digital microscope smoothly, please read this instruction carefully or learn to
use it by other ways.
Specifications
• Image sensor: 5MP
• Max resolution: 2592 x 1944
• Lens: interchangeable lens
• Magnification: 30 - 2000X (different
lenses)
• Photo and video: anti-shake photo
and video function
• Light source: adjustable &
interchangeable
• Frame rate: max 30FPS
• Interface: type-c
• Working distance:
10 – 40 mm (lens L10)
30 – 200 mm (lens L100)
8 – 9 mm (lens L1000）
1.5 - 2 mm (lens L2000）
• Measurement：
software measurement
System requirements
• Operating system：
Windows 7/8/10，Mac OS
• USB 2.0 port
• More than 600 MB free disk space
Packing list
• Standard package：B011 microscope
body (including lens L10, white light),
Z008 stand, USB cable,
USB stick for software, calibration ruler,
user manual
• Optional items
Lens: L100, L1000, L2000.
Light source: DP01, DR01, DA01, DB02,
DB03.
Fixed-focus cap: D10、D100、
D1000、D2000.

2 / 5
Structure
How to install lens and light

3 / 5
Optional accessories

4 / 5
Hardware installation
1. Connect USB cable to Type-C port of the microscope body, and USB port
of computer. Put microscope into the holder of
the stand and tighten up (keep the focus knob
exposed); keep the lens towards the object as
fig 1.
2. Adjust the lift knob to get proper object
distance, rotate the focus ring to make image
clear (zoom in zoom out).
3. Adjust the brightness by the touch dimming
button.
4. Touch the photo button on the microscope to
take a picture.
5. When hand-held, the focusing and dimming operations are the same as
above, and it is better to use the corresponding fixed-focus cap.
6. The lifting stand is installed as shown in the figure below,
Fig 2
Fig1

5 / 5
Trouble shooting
No.
Troubles
Possible reasons
Solution
1
Black screen
LED off.
Preview is not on.
Choose wrong device.
Connection between PC &
microscope is not good.
Turn on LED by touch button and
connect lens well.
Click on preview.
Choose right device.
Plug into mother board USB port.
2
Vague image,
low frame rate
Wrong focal distance.
connection to PC not well.
High resolution.
Limitation of PC configuration.
Adjust focal distance.
Plug to mother board USB port.
Choose lower resolution.
Try another PC.
3
Image distortion
Connection to pc not well.
Microscope malfunction.
Plug to mother board USB port.
Return for repairs.
4
Unrecognized
Connection to pc not well.
Microscope malfunction.
Plug to mother board USB port.
Return for repairs.
Notice
1. Please do not touch lens and other optics, otherwise, product
performance may be influenced.
2. Please do not disassemble product to avoid danger and product
damage.
3. Please use and store it under this environment, temperature: 0o C~ 40o C;
humidity: 45% ~ 85%.
4. In case of dropping tiny object or liquid into microscope, please
disconnect the USB cable immediately and send product to manufacture
for quality inspection and repair.
Shenzhen Supereyes Co., Ltd
Unit 202, 2F, Kelunte Technology Park, Ganli 6th Road, Longgang District
Shenzhen, Guangdong, China, 518000
Customer service：[email protected]
After sale line: 4006110511