Superior Sheffield User manual

What's Included
• (2) 1-3/4"sq. x 17" Posts
• (2) 1-3/4"sq. x 71" Posts
• (44) 7/8"x 1-1/2" x 9" Boards
• (7) 7/8"x 3" x 12" Boards
• (4) 1-1/4"sq. x 14-7/8" Rails
• (4) 1-1/4"sq. x 23-7/8" Rails
• (2) 7/8"x 1-1/2"x 24" Cross Rail
• (2) 7/8"x 1-1/2"x 15" Cross Rail
• (2) 5/8"x 59" Round Spokes
• (1) 5/8"x 61" Round Spoke
• (24) #8x 1" Screws/ Caps
260 Jalyn Drive ● New Holland, PA 17557
SuperiorPlasticProducts.com
Shefeld Planter
& Trellis
SPPIG161010

5
3
SuperiorPlasticProducts.com
Fasten Cross Rails at 21" (inside
dimension)
Assemble side sections using the
14-7/8" Rails.
Place side sections into routed Post
holes
21"
Insert 12" Boards into bottom
channel.
Note: Attach washer
before fastening screw,
then attach cap.
4
6
Assemble the back section rst;
using the 23-7/8" Rails combined
with 9" Boards, and ensuring the
angled cuts face the same direction.
1
Next position the 24" Cross Rails,
and insert these along with the
back section into the corresponding
routed Post holes. Ensure the
remaining holes face forward to
receive the side sections.
2

7
Place front section onto side
sections, and over bottom boards.
Insert Spokes according to
illustration; placing the longest in the
center.
9
Ensure a tight t, and secure using
provided screws at each corner
position (see example: circled)
Assemble front section using 23-7/8"
Rails, 9" Boards, and 17" Posts. Ensure
cut angles, and remaining holes face
the same direction to receive the side
sections.
8
10
SuperiorPlasticProducts.com
260 Jalyn Drive ● New Holland, PA 17557