9
4.Waitfor 3secondsandthen turn onSUPERTOOTHMOTO1.
5.Press VolumeDown(4) button ofSUPERTOOTHMOTO2for about5
seconds(1st beep followedby5successivebeepswillbeheard).
SUPERTOOTHMOTO2pairingblinkwill changetoblinkingblue while
SUPERTOOTHMOTO1willagainturnoff.
6.Waitfor 3secondsandthen turn onagainSUPERTOOTHMOTO1.
7.Press MFB(1) ofSUPERTOOTHMOTO1forabout3seconds(2nd beep)to
connect toSUPERTOOTHMOTO2.
The set-up hasbeensuccessful. Bothheadsetsare nowconnected. Full-
duplexconversationscanbemade.
Note: Thishastobedone onlyonceeverytimeyouwant touse2different
SUPERTOOTHMOTOtogether.
Using Intercom:
Toswitchfromphone tointercom,press MFB(1) for 3secondsor until
you hearthe2nd beep.
Toswitchfromintercomtophone,press MFB(1) for1secondoruntil
you hearthe1st beep.
ImportantNotes:
1.BothSUPERTOOTHMOTOmust be inintercommode toallowintercom.
2.Duringintercommode,the ringofthephonewillnotbe transferred tothe
SUPERTOOTHMOTOautomatically.(Tip:Switchonyour phone’s
vibrateoptiontonoticeanincomingcall.)
3.Pressthe MFB(1) for 1second totransfer the calltoyour headset. Some
phonesmayrequire2timespresson MFB(1) inorder toansweran
incomingphone call fromintercommode (1st presstotransfer thecallto
the headset, 2nd presstoanswer the call).
Multi-Pairing /SwitchingConnectionsbetweenPhones
TheSUPERTOOTHMOTOcanbe pairedto5Bluetoothphones. Anadditional
pairingwillautomaticallydeletethephone that hasnot been used for the longest
time.Thus,maintaining 5phonesinitsmemory.
You can easilyswitchtoanyof the paired phonesby:
1.Disconnecting the currentlyusedphone using the“Activedevices”inthe
Bluetoothmenu of that phone.
2.Connecttothe wanted phone byusingthe “Paireddevices”inthe Bluetooth
menu of that wantedphone.
Note:Reconnection toapaired phonecanalsobe donebypressing the
MFB(1).Butwhenyoupressthe MFB(1),theSUPERTOOTHMOTOwill
attempt toconnect tothe last used phone only. Soit isrecommended toconnect
toanotherpairedphone usingthe phone’smenu.
