1. Take out the numeric keypad and connect the USB interface to the computer's USB port.
2. The computer automatically identifies the USB device and install the driver automatically.
3. The computer prompts the keypad to be installed successfully and then it can be used.
4. [Num Lock] key is in the upper left corner. Its function is to switch between number
and functional keys:
Press "Tab" key and "Backspace" key at same time to switch the color and mode of
the backlit.
Switching order: red->blue->purple->breathing light->turn off light
②he Press t "Tab" key and "+" key at the same time, the brightness of the backlit will
increase.
5.Backlit switch:
When the light is on: 0123456789/*+-, Tab, Enter, Backspace keys can be used. ←
When the indicator is off: +-/*, Tab, Enter, Backspace, Up, Down, Left, Right, Home, ←
Pg up, Pg dn, End, Insert, Del can be used.
OPERATION
