Suzuki Trumpet Maintenance manual

DO
Be careful when handling your Trumpet. It is a delicate
instrument.
DO
Wipe off the Trumpet and Mouthpiece after you have
fi nished playing.
DO
Carefully place the Trumpet and Mouthpiece back in
the correct compartment in the Case.
DO
Oil the Valves every few weeks.
DO
Use a gentle twisting motion when putting on the
Mouthpiece.
DO
Use the 2 Spit Valves after each playing session.
DO’S DON’TS
DON’T
Force the sections into the Case.
DON’T
Close the lid if it seems diffi cult.
DON’T
Eat while playing.
DON’T
Force the Mouthpiece into the Lead Pipe.
DON’T
Hit the Lead Pipe. It is very delicate..
DON’T
Don’t remove all 3 valves at the same time.
Care
&
Maintenance
& Maintenance&
d d
q
w
q
q
q
r
Valve
Cap
Valve
Guide
Valve Cap
Valve
Surface
e
t
Valve
Cover
w
y
6. WHEN YOU HAVE FINISHED PLAYING YOUR TRUMPET
• Keep good posture at all times. Sit or
stand straight and centered.
• Take in full amounts of air.
• Don’t breath air out but blow air out
through the Trumpet.
• Keep lips moist and slightly stretched
so that the front of the lips has a small
opening.
• Learn to blow a steady stream of air with
only slight pressure on the lips.
• Keep the mouthpiece in the center of
your lips.
• Keep your cheeks fl at.
• Keep the tongue relaxed with the tip
resting behind the bottom teeth.
• Warm-up on the Mouthpiece whenever
you can, keeping different vowels in
mind, like eeee, ahhh, and ooo. Try
buzzing these vowels even changing
from one to another like a fi re siren.
• Try to keep your chin down and
keep the corners of your mouth fi rm.
Occasionally practice in front of a mirror.
• The higher the notes the more you
should feel that you are blowing down
into the Mouthpiece.
• Air must move quickly through a small
opening in the lips for the best sound.
• This Trumpet comes with a #7C
Mouthpiece. This is the most common size.
5. GOOD TIPS ON PLAYING THE TRUMPET
There is a number on each Valve
and Valve Casing. Be Careful when
putting the Valves back, make sure
the Valve numbers match.
Do not remove all the Valves at
the same time. Rmove and Oil one
Valve at a time.
A.
How to Oil the Valves
• The Valves should be oiled once every
week or two. Carefully unscrew the
Valve Cap.
q
• Lift out the Valve Cap and Valve.
w
• Apply only a few drops of Valve Oil
onto the Valve surface.
e
• Return the Valve back to the SAME Valve
casing it came from.
• Slowly and gently push the Valve back
into the top of the Valve Casing.
r
• The Valve MUST line up with a Valve
Guide INSIDE the Valve Casing.
t
• As you lower the Valve, twist it back and
forth until it locks into place.
• When it is in all the way down, tighten
the Valve Cap.
y
B.
Oil the Valve Cover
• Turn your Trumpet upside down.
• Unscrew the bottom Valve Cover.
q
• Place only a couple drops of Valve Oil
onto the Valve Casing as shown.
w
• Repeat for each Valve.
C.
Oil the Tuning Slide
• Locate the Tuning Slide on your
• Locate the Tuning Slide on your
Trumpet.
q
• Pull the Tuning Slide out a few inches.
• Place only a couple drops of Valve Oil
onto the Tuning Slide as shown.
D.
Spit Valves
• Frequently use the two Spit Valves
to remove condensation from the
Trumpet.
q
BE CAREFUL! Do NOT force the Valve
back into the Valve
Casing. Use a slow, gentle
back and forth motion as
you lower the Valve into
the Valve Casing
Make sure to place the trumpet
back in its compartment carefully.
BE CAREFUL! Don’t force the
lid down.
Close the top on the Valve Oil
Bottle securely to prevent leaks.

© 2007 Suzuki Corporation
www.suzukibandinstruments.com

Assembly, Care & Maintenance Guide
Assembly, Care & Maintenance Guide
www.suzukibandinstruments.com
C O N C E R T I N O C O L L E C T I O N
C O N C E R T I N O C O L L E C T I O N

qw
q
e
w
w
q
Bell
Logo
1st Valve
2nd Valve
3rd Valve
Lead Pipe
Mouthpiece
1st Slide
2nd Slide
3rd Slide Spit Valves
Main
Tuning
Slide
Mouthpiece
Receiver
3rd Valve
Slide Ring
Finger
Hook
Cup Rim
Shank
q
Lead Pipe
Shank
qw
w
A.
Position the Case
Place the aluminum “Roadie” Trumpet case
in front of you as shown in this picture.
You should be able to see the Suzuki logo
on the case. If you do not see the logo, the
case is upside down and should NOT be
opened. Open the case ONLY if you can
see this logo.
1. UNPACKING YOUR NEW TRUMPET
B.
Open the Case
Unhook the 2 latches on either
side of the handle and open
the lid. Your new Trumpet and
Mouthpiece must be CAREFULLY
unwrapped.
2. HERE ARE THE NAMES OF YOUR TRUMPET PARTS
A.
Carrying Case
When you open the lid
of your new Trumpet
Carrying Case, you
will see the Trumpet,
Mouthpiece and
Mouthpiece and
Storage Compartment.
Storage Compartment.
B.
Accessories
Your new Trumpet includes
these accessories.
This picture shows you what your
Trumpet will look like when it
has been completely assembled.
Read the next sections to
learn how to put your Trumpet
together so that it looks like this
when you are fi nished.
3. THIS IS WHAT YOUR TRUMPET WILL LOOK LIKE WHEN ASSEMBLED
1.
Trumpet
2.
Mouthpiece
Mouthpiece
3.
Storage
Compartment
Compartment
1.
Polishing Cloth
2.
Valve Oil
C.
Unwrap Your Trumpet
• Slowly remove the plastic covering and paper
• Slowly remove the plastic covering and paper
wrapping on the Trumpet and Mouthpiece.
wrapping on the Trumpet and Mouthpiece.
Carefully put the Trumpet and Mouthpiece back
in the case in their proper compartments!
4. HOW TO PUT YOUR NEW TRUMPET TOGETHER
A.
How to Hold Your Trumpet
• Locate the Trumpet in the case.
• Carefully remove the Trumpet from the case and
hold it as shown.
B.
Put on the Mouthpiece
• To insert the Mouthpiece, take the long thin end, called the
Shank, and place it into the Lead Pipe end of the Trumpet.
q
• Gently twist the Mouthpiece into the Lead Pipe.
w
BE CAREFUL!
The Lead Pipe is very delicate. Do not hit or bend it. Do not
push the Mouthpiece into the Lead Pipe too much or tap on
the Mouthpiece as it may get stuck.
C.
Trumpet Playing Positions
• This is the correct position of
your Right Hand.
q
• This is the correct position of
your Left Hand.
w
Your new Trumpet should
Your new Trumpet should
now look like this.
Have fun!
STOP!
Read This First Before You Assemble Your Trumpet
Did You Know This?
Your new Trumpet is
manufactured by the
Suzuki Corporation, the
Worlds largest producer
of musical instruments for
education. We have been making
the coolest musical instruments
for your school and church for
over 50 years! And now, we’ve designed a
Trumpet that you can learn to play quickly and
easily. We know you can’t wait to play in the
band, marching band or orchestra and make
exciting music together with all your friends.
Playing a musical instrument, especially in a
group, is an incredible experience. If you pay
attention and study a little each day, pretty
soon you will be amazed at the awesome
music you will be able to perform. And your
Suzuki Trumpet will perform for you too.
Together, you’ll both have a really great time!
This Is A Precise And Delicate Instrument . . .
Be Careful With It!
The Trumpet, as with all musical
instruments, is a precise, yet
delicate instrument. It has many
parts, all coming together to
create a beautiful musical
instrument. You must
be very careful when
handling your new
Trumpet, putting it together and
taking it apart. We recommend
that you let your music teacher
show you how your new
Trumpet should be assembled
and dis-assembled. You’ll get the hang of it
very quickly. In the meantime, read through
this brochure now so you can get familiar
with the assembly and care of your new
Trumpet. And be careful!
Wanna Get Good On Your Instrument Real Fast?
Who is your favorite band or musician?
Whether you like rock, pop, country or classical,
you can be sure that all the best players had
one thing in common . . . a private teacher.
After your music teacher has shown you the
basics of how to put your instrument together
and how to play a few notes, its time to get
some private instruction. Your music teacher
may have some recommendations or
may even be the perfect private teacher
you are looking for. It’s a great way to get
real good, real fast.
You can also visit our web site at
www.suzukibandinstruments.com
If You Have Any Problems Or Questions About Your Trumpet, Call Us Toll Free. We Can Help You.
Do Not Return Your Trumpet To The Store!
1-800-854-1594
Read This First Before You Assemble Your Trumpet
create a beautiful musical
Trumpet, putting it together and
taking it apart. We recommend
that you let your music teacher
show you how your new
Read This First Before You Assemble Your Trumpet
Did You Know This?
Your new Trumpet is
manufactured by the
of musical instruments for
education. We have been making
the coolest musical instruments
for your school and church for
over 50 years! And now, we’ve designed a

qw
q
e
w
w
q
Bell
Logo
1st Valve
2nd Valve
3rd Valve
Lead Pipe
Mouthpiece
1st Slide
2nd Slide
3rd Slide Spit Valves
Main
Tuning
Slide
Mouthpiece
Receiver
3rd Valve
Slide Ring
Finger
Hook
Cup Rim
Shank
q
Lead Pipe
Shank
qw
w
A.
Position the Case
Place the aluminum “Roadie” Trumpet case
in front of you as shown in this picture.
You should be able to see the Suzuki logo
on the case. If you do not see the logo, the
case is upside down and should NOT be
opened. Open the case ONLY if you can
see this logo.
1. UNPACKING YOUR NEW TRUMPET
B.
Open the Case
Unhook the 2 latches on either
side of the handle and open
the lid. Your new Trumpet and
Mouthpiece must be CAREFULLY
unwrapped.
2. HERE ARE THE NAMES OF YOUR TRUMPET PARTS
A.
Carrying Case
When you open the lid
of your new Trumpet
Carrying Case, you
will see the Trumpet,
Mouthpiece and
Mouthpiece and
Storage Compartment.
Storage Compartment.
B.
Accessories
Your new Trumpet includes
these accessories.
This picture shows you what your
Trumpet will look like when it
has been completely assembled.
Read the next sections to
learn how to put your Trumpet
together so that it looks like this
when you are fi nished.
3. THIS IS WHAT YOUR TRUMPET WILL LOOK LIKE WHEN ASSEMBLED
1.
Trumpet
2.
Mouthpiece
Mouthpiece
3.
Storage
Compartment
Compartment
1.
Polishing Cloth
2.
Valve Oil
C.
Unwrap Your Trumpet
• Slowly remove the plastic covering and paper
• Slowly remove the plastic covering and paper
wrapping on the Trumpet and Mouthpiece.
wrapping on the Trumpet and Mouthpiece.
Carefully put the Trumpet and Mouthpiece back
in the case in their proper compartments!
4. HOW TO PUT YOUR NEW TRUMPET TOGETHER
A.
How to Hold Your Trumpet
• Locate the Trumpet in the case.
• Carefully remove the Trumpet from the case and
hold it as shown.
B.
Put on the Mouthpiece
• To insert the Mouthpiece, take the long thin end, called the
Shank, and place it into the Lead Pipe end of the Trumpet.
q
• Gently twist the Mouthpiece into the Lead Pipe.
w
BE CAREFUL!
The Lead Pipe is very delicate. Do not hit or bend it. Do not
push the Mouthpiece into the Lead Pipe too much or tap on
the Mouthpiece as it may get stuck.
C.
Trumpet Playing Positions
• This is the correct position of
your Right Hand.
q
• This is the correct position of
your Left Hand.
w
Your new Trumpet should
Your new Trumpet should
now look like this.
Have fun!
STOP!
Read This First Before You Assemble Your Trumpet
Did You Know This?
Your new Trumpet is
manufactured by the
Suzuki Corporation, the
Worlds largest producer
of musical instruments for
education. We have been making
the coolest musical instruments
for your school and church for
over 50 years! And now, we’ve designed a
Trumpet that you can learn to play quickly and
easily. We know you can’t wait to play in the
band, marching band or orchestra and make
exciting music together with all your friends.
Playing a musical instrument, especially in a
group, is an incredible experience. If you pay
attention and study a little each day, pretty
soon you will be amazed at the awesome
music you will be able to perform. And your
Suzuki Trumpet will perform for you too.
Together, you’ll both have a really great time!
This Is A Precise And Delicate Instrument . . .
Be Careful With It!
The Trumpet, as with all musical
instruments, is a precise, yet
delicate instrument. It has many
parts, all coming together to
create a beautiful musical
instrument. You must
be very careful when
handling your new
Trumpet, putting it together and
taking it apart. We recommend
that you let your music teacher
show you how your new
Trumpet should be assembled
and dis-assembled. You’ll get the hang of it
very quickly. In the meantime, read through
this brochure now so you can get familiar
with the assembly and care of your new
Trumpet. And be careful!
Wanna Get Good On Your Instrument Real Fast?
Who is your favorite band or musician?
Whether you like rock, pop, country or classical,
you can be sure that all the best players had
one thing in common . . . a private teacher.
After your music teacher has shown you the
basics of how to put your instrument together
and how to play a few notes, its time to get
some private instruction. Your music teacher
may have some recommendations or
may even be the perfect private teacher
you are looking for. It’s a great way to get
real good, real fast.
You can also visit our web site at
www.suzukibandinstruments.com
If You Have Any Problems Or Questions About Your Trumpet, Call Us Toll Free. We Can Help You.
Do Not Return Your Trumpet To The Store!
1-800-854-1594
Read This First Before You Assemble Your Trumpet
create a beautiful musical
Trumpet, putting it together and
taking it apart. We recommend
that you let your music teacher
show you how your new
Read This First Before You Assemble Your Trumpet
Did You Know This?
Your new Trumpet is
manufactured by the
of musical instruments for
education. We have been making
the coolest musical instruments
for your school and church for
over 50 years! And now, we’ve designed a

qw
q
e
w
w
q
Bell
Logo
1st Valve
2nd Valve
3rd Valve
Lead Pipe
Mouthpiece
1st Slide
2nd Slide
3rd Slide Spit Valves
Main
Tuning
Slide
Mouthpiece
Receiver
3rd Valve
Slide Ring
Finger
Hook
Cup Rim
Shank
q
Lead Pipe
Shank
qw
w
A.
Position the Case
Place the aluminum “Roadie” Trumpet case
in front of you as shown in this picture.
You should be able to see the Suzuki logo
on the case. If you do not see the logo, the
case is upside down and should NOT be
opened. Open the case ONLY if you can
see this logo.
1. UNPACKING YOUR NEW TRUMPET
B.
Open the Case
Unhook the 2 latches on either
side of the handle and open
the lid. Your new Trumpet and
Mouthpiece must be CAREFULLY
unwrapped.
2. HERE ARE THE NAMES OF YOUR TRUMPET PARTS
A.
Carrying Case
When you open the lid
of your new Trumpet
Carrying Case, you
will see the Trumpet,
Mouthpiece and
Mouthpiece and
Storage Compartment.
Storage Compartment.
B.
Accessories
Your new Trumpet includes
these accessories.
This picture shows you what your
Trumpet will look like when it
has been completely assembled.
Read the next sections to
learn how to put your Trumpet
together so that it looks like this
when you are fi nished.
3. THIS IS WHAT YOUR TRUMPET WILL LOOK LIKE WHEN ASSEMBLED
1.
Trumpet
2.
Mouthpiece
Mouthpiece
3.
Storage
Compartment
Compartment
1.
Polishing Cloth
2.
Valve Oil
C.
Unwrap Your Trumpet
• Slowly remove the plastic covering and paper
• Slowly remove the plastic covering and paper
wrapping on the Trumpet and Mouthpiece.
wrapping on the Trumpet and Mouthpiece.
Carefully put the Trumpet and Mouthpiece back
in the case in their proper compartments!
4. HOW TO PUT YOUR NEW TRUMPET TOGETHER
A.
How to Hold Your Trumpet
• Locate the Trumpet in the case.
• Carefully remove the Trumpet from the case and
hold it as shown.
B.
Put on the Mouthpiece
• To insert the Mouthpiece, take the long thin end, called the
Shank, and place it into the Lead Pipe end of the Trumpet.
q
• Gently twist the Mouthpiece into the Lead Pipe.
w
BE CAREFUL!
The Lead Pipe is very delicate. Do not hit or bend it. Do not
push the Mouthpiece into the Lead Pipe too much or tap on
the Mouthpiece as it may get stuck.
C.
Trumpet Playing Positions
• This is the correct position of
your Right Hand.
q
• This is the correct position of
your Left Hand.
w
Your new Trumpet should
Your new Trumpet should
now look like this.
Have fun!
STOP!
Read This First Before You Assemble Your Trumpet
Did You Know This?
Your new Trumpet is
manufactured by the
Suzuki Corporation, the
Worlds largest producer
of musical instruments for
education. We have been making
the coolest musical instruments
for your school and church for
over 50 years! And now, we’ve designed a
Trumpet that you can learn to play quickly and
easily. We know you can’t wait to play in the
band, marching band or orchestra and make
exciting music together with all your friends.
Playing a musical instrument, especially in a
group, is an incredible experience. If you pay
attention and study a little each day, pretty
soon you will be amazed at the awesome
music you will be able to perform. And your
Suzuki Trumpet will perform for you too.
Together, you’ll both have a really great time!
This Is A Precise And Delicate Instrument . . .
Be Careful With It!
The Trumpet, as with all musical
instruments, is a precise, yet
delicate instrument. It has many
parts, all coming together to
create a beautiful musical
instrument. You must
be very careful when
handling your new
Trumpet, putting it together and
taking it apart. We recommend
that you let your music teacher
show you how your new
Trumpet should be assembled
and dis-assembled. You’ll get the hang of it
very quickly. In the meantime, read through
this brochure now so you can get familiar
with the assembly and care of your new
Trumpet. And be careful!
Wanna Get Good On Your Instrument Real Fast?
Who is your favorite band or musician?
Whether you like rock, pop, country or classical,
you can be sure that all the best players had
one thing in common . . . a private teacher.
After your music teacher has shown you the
basics of how to put your instrument together
and how to play a few notes, its time to get
some private instruction. Your music teacher
may have some recommendations or
may even be the perfect private teacher
you are looking for. It’s a great way to get
real good, real fast.
You can also visit our web site at
www.suzukibandinstruments.com
If You Have Any Problems Or Questions About Your Trumpet, Call Us Toll Free. We Can Help You.
Do Not Return Your Trumpet To The Store!
1-800-854-1594
Read This First Before You Assemble Your Trumpet
create a beautiful musical
Trumpet, putting it together and
taking it apart. We recommend
that you let your music teacher
show you how your new
Read This First Before You Assemble Your Trumpet
Did You Know This?
Your new Trumpet is
manufactured by the
of musical instruments for
education. We have been making
the coolest musical instruments
for your school and church for
over 50 years! And now, we’ve designed a

DO
Be careful when handling your Trumpet. It is a delicate
instrument.
DO
Wipe off the Trumpet and Mouthpiece after you have
fi nished playing.
DO
Carefully place the Trumpet and Mouthpiece back in
the correct compartment in the Case.
DO
Oil the Valves every few weeks.
DO
Use a gentle twisting motion when putting on the
Mouthpiece.
DO
Use the 2 Spit Valves after each playing session.
DO’S DON’TS
DON’T
Force the sections into the Case.
DON’T
Close the lid if it seems diffi cult.
DON’T
Eat while playing.
DON’T
Force the Mouthpiece into the Lead Pipe.
DON’T
Hit the Lead Pipe. It is very delicate..
DON’T
Don’t remove all 3 valves at the same time.
Care
&
Maintenance
& Maintenance&
d d
q
w
q
q
q
r
Valve
Cap
Valve
Guide
Valve Cap
Valve
Surface
e
t
Valve
Cover
w
y
6. WHEN YOU HAVE FINISHED PLAYING YOUR TRUMPET
• Keep good posture at all times. Sit or
stand straight and centered.
• Take in full amounts of air.
• Don’t breath air out but blow air out
through the Trumpet.
• Keep lips moist and slightly stretched
so that the front of the lips has a small
opening.
• Learn to blow a steady stream of air with
only slight pressure on the lips.
• Keep the mouthpiece in the center of
your lips.
• Keep your cheeks fl at.
• Keep the tongue relaxed with the tip
resting behind the bottom teeth.
• Warm-up on the Mouthpiece whenever
you can, keeping different vowels in
mind, like eeee, ahhh, and ooo. Try
buzzing these vowels even changing
from one to another like a fi re siren.
• Try to keep your chin down and
keep the corners of your mouth fi rm.
Occasionally practice in front of a mirror.
• The higher the notes the more you
should feel that you are blowing down
into the Mouthpiece.
• Air must move quickly through a small
opening in the lips for the best sound.
• This Trumpet comes with a #7C
Mouthpiece. This is the most common size.
5. GOOD TIPS ON PLAYING THE TRUMPET
There is a number on each Valve
and Valve Casing. Be Careful when
putting the Valves back, make sure
the Valve numbers match.
Do not remove all the Valves at
the same time. Rmove and Oil one
Valve at a time.
A.
How to Oil the Valves
• The Valves should be oiled once every
week or two. Carefully unscrew the
Valve Cap.
q
• Lift out the Valve Cap and Valve.
w
• Apply only a few drops of Valve Oil
onto the Valve surface.
e
• Return the Valve back to the SAME Valve
casing it came from.
• Slowly and gently push the Valve back
into the top of the Valve Casing.
r
• The Valve MUST line up with a Valve
Guide INSIDE the Valve Casing.
t
• As you lower the Valve, twist it back and
forth until it locks into place.
• When it is in all the way down, tighten
the Valve Cap.
y
B.
Oil the Valve Cover
• Turn your Trumpet upside down.
• Unscrew the bottom Valve Cover.
q
• Place only a couple drops of Valve Oil
onto the Valve Casing as shown.
w
• Repeat for each Valve.
C.
Oil the Tuning Slide
• Locate the Tuning Slide on your
• Locate the Tuning Slide on your
Trumpet.
q
• Pull the Tuning Slide out a few inches.
• Place only a couple drops of Valve Oil
onto the Tuning Slide as shown.
D.
Spit Valves
• Frequently use the two Spit Valves
to remove condensation from the
Trumpet.
q
BE CAREFUL! Do NOT force the Valve
back into the Valve
Casing. Use a slow, gentle
back and forth motion as
you lower the Valve into
the Valve Casing
Make sure to place the trumpet
back in its compartment carefully.
BE CAREFUL! Don’t force the
lid down.
Close the top on the Valve Oil
Bottle securely to prevent leaks.

© 2007 Suzuki Corporation
www.suzukibandinstruments.com

Assembly, Care & Maintenance Guide
Assembly, Care & Maintenance Guide
www.suzukibandinstruments.com
C O N C E R T I N O C O L L E C T I O N
C O N C E R T I N O C O L L E C T I O N

DO
Be careful when handling your Trumpet. It is a delicate
instrument.
DO
Wipe off the Trumpet and Mouthpiece after you have
fi nished playing.
DO
Carefully place the Trumpet and Mouthpiece back in
the correct compartment in the Case.
DO
Oil the Valves every few weeks.
DO
Use a gentle twisting motion when putting on the
Mouthpiece.
DO
Use the 2 Spit Valves after each playing session.
DO’S DON’TS
DON’T
Force the sections into the Case.
DON’T
Close the lid if it seems diffi cult.
DON’T
Eat while playing.
DON’T
Force the Mouthpiece into the Lead Pipe.
DON’T
Hit the Lead Pipe. It is very delicate..
DON’T
Don’t remove all 3 valves at the same time.
Care
&
Maintenance
& Maintenance&
d d
q
w
q
q
q
r
Valve
Cap
Valve
Guide
Valve Cap
Valve
Surface
e
t
Valve
Cover
w
y
6. WHEN YOU HAVE FINISHED PLAYING YOUR TRUMPET
• Keep good posture at all times. Sit or
stand straight and centered.
• Take in full amounts of air.
• Don’t breath air out but blow air out
through the Trumpet.
• Keep lips moist and slightly stretched
so that the front of the lips has a small
opening.
• Learn to blow a steady stream of air with
only slight pressure on the lips.
• Keep the mouthpiece in the center of
your lips.
• Keep your cheeks fl at.
• Keep the tongue relaxed with the tip
resting behind the bottom teeth.
• Warm-up on the Mouthpiece whenever
you can, keeping different vowels in
mind, like eeee, ahhh, and ooo. Try
buzzing these vowels even changing
from one to another like a fi re siren.
• Try to keep your chin down and
keep the corners of your mouth fi rm.
Occasionally practice in front of a mirror.
• The higher the notes the more you
should feel that you are blowing down
into the Mouthpiece.
• Air must move quickly through a small
opening in the lips for the best sound.
• This Trumpet comes with a #7C
Mouthpiece. This is the most common size.
5. GOOD TIPS ON PLAYING THE TRUMPET
There is a number on each Valve
and Valve Casing. Be Careful when
putting the Valves back, make sure
the Valve numbers match.
Do not remove all the Valves at
the same time. Rmove and Oil one
Valve at a time.
A.
How to Oil the Valves
• The Valves should be oiled once every
week or two. Carefully unscrew the
Valve Cap.
q
• Lift out the Valve Cap and Valve.
w
• Apply only a few drops of Valve Oil
onto the Valve surface.
e
• Return the Valve back to the SAME Valve
casing it came from.
• Slowly and gently push the Valve back
into the top of the Valve Casing.
r
• The Valve MUST line up with a Valve
Guide INSIDE the Valve Casing.
t
• As you lower the Valve, twist it back and
forth until it locks into place.
• When it is in all the way down, tighten
the Valve Cap.
y
B.
Oil the Valve Cover
• Turn your Trumpet upside down.
• Unscrew the bottom Valve Cover.
q
• Place only a couple drops of Valve Oil
onto the Valve Casing as shown.
w
• Repeat for each Valve.
C.
Oil the Tuning Slide
• Locate the Tuning Slide on your
• Locate the Tuning Slide on your
Trumpet.
q
• Pull the Tuning Slide out a few inches.
• Place only a couple drops of Valve Oil
onto the Tuning Slide as shown.
D.
Spit Valves
• Frequently use the two Spit Valves
to remove condensation from the
Trumpet.
q
BE CAREFUL! Do NOT force the Valve
back into the Valve
Casing. Use a slow, gentle
back and forth motion as
you lower the Valve into
the Valve Casing
Make sure to place the trumpet
back in its compartment carefully.
BE CAREFUL! Don’t force the
lid down.
Close the top on the Valve Oil
Bottle securely to prevent leaks.

© 2007 Suzuki Corporation
www.suzukibandinstruments.com

Assembly, Care & Maintenance Guide
Assembly, Care & Maintenance Guide
www.suzukibandinstruments.com
C O N C E R T I N O C O L L E C T I O N
C O N C E R T I N O C O L L E C T I O N