Svatar Bio-Light SPL 2.0 User manual

LED BIO-LIGHT MACHINE
SPL 2.0
RED+BLUE+INFRARED
User Instructions
Guangzhou SVATAR Electronic Technology Co., Ltd.
Unit 503, Haoquan Building, Jinxin Road,
Guangzhou 510405, China
www.svatar.com
professional aesthetic equipment

Bio-Light SPL 2.0
General Information
Unpacking: Thank you for purchasing the LED Bio-Light Therapy Machine
(SPL 2.0). Every SPL 2.0 has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for damage
that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your fixture for any damage and be sure all accessories
necessary to operate the unit has arrived intact. In the case damage has been
found or parts are missing, please contact our toll free customer support
number for further instructions. Do not return this unit to your dealer without
first contacting customer support.
Introduction: Bio-Light Therapy is the interaction of light, delivered through
Light Emitting Diodes (LEDs), to activate cell receptors causing them to
produce collagen or multiply. LEDs offer a totally natural, non-ablative method
for skin rejuvenation. The light from the LEDs interacts with cells and
stimulates them to produce new collagen and elastin. Studies confirm that the
same LED energy can be used to inhibit collagen formation, which can be
helpful in the treatment of scars. By manipulating the wavelengths, cells can
be turned on and off. Infrared light LEDs acts almost the same as RED light, but
goes deeper. Blue light LEDs are used in the treatment of acne. Red light LEDs
are used for PhotoDynamic therapy(PDT), collagen stimulation, blood
circulation and scalp issue.
Customer Support: We provides a customer support line, to provide
services for all our products. You may also visit us on the web at
www.svatar.com for any comments or suggestions. Service Hours are Monday
through Friday 10:00 a.m. to 5:00 p.m. China Standard Time.
E-mail: [e-mail]
PLEASE recycle the shipping carton whenever possible.

Bio-Light SPL 2.0
General Introductions
To optimize the performance of this product,please read these operating
instructions carefully to familiarize yourself with the basic operations of this
unit.These instructions contain important safety information regarding the
use and maintenance of this unit.Please keep this manual with the unit,for
future reference..
Bio-Light SPL 2.0
Features
Seven Modes: Red,Blue,IR,Red+Blue,Red+IR,Blue+Infrared,Total
High Power,High Frequency
Adjusting Arm,adjusting treatment head
Large treatment area
1,420 High Power SMD LEDs
Multiple applications
Bio-Light SPL 2.0
Warranty Registration
The SPL 2.0 carries a one year limited warranty. Your information will be
recorded in our CRM system to validate the purchase.All returned service
items whether under warranty or not,must be freight pre-paid.You should
contact with our service department to ensure the problems.Don't send the
machine to your dealer before you contact with our customer support.We'll
finish the repair in 15 working days and then return the machine to the
shipper.
We also provide lifetime services for all our products.You may need to pay for
these services.
Warning! To prevent or reduce the risk of electrical shock or fire, do not
expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repair yourself, doing so will void your manufacture’s warranty.
In the unlikely event your unit may require service please contact us.

Bio-Light SPL 2.0
Safety Precaution
·To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
·Do not spill water or other liquids into or on to your unit.
·Be sure that the local power outlet match that of the required voltage
for your unit.
·Do not attempt to operate this unit if the power cord has been frayed
or broken.
·Disconnect from main power before making any type of connection.
·Do not remove the cover under any conditions. There are no user
serviceable parts inside.
·Never operate this unit when it’s cover is removed.
·Never plug this unit in to a dimmer pack
·Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
·Do not attempt to operate this unit, if it becomes damaged.
·This unit is intended for indoor use only, use of this product outdoors
voids all warranties.
·During long periods of non-use, disconnect the unit’s main power.
·Always mount this unit in safe and stable matter.
·Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to the point they exit from the unit.
·The fixture should be cleaned as recommended by the manufacturer.
·Do not use the machine over 60 minutes on one treatment area.
·Keep the machine away from water.

Bio-Light SPL 2.0
General View
Machine Parts
a: Adjusting Arm
b: LED Treatment Head
c: Knobs that adjust the angel of the treatment head
d: Control Panel
e: Power Switch
f: Fixture for power cord
g: Electric Outlet
h: Rolling Pedestal

Bio-Light SPL 2.0
General View
Control Panel
①Indicators: show the selected function(color)
②Screen 1: show current light power
③Function Selection: select the functions(colors)
④Power Adjusting Button: adjust the light power(1~10 levels)
⑤Screen 2: show current treatment time
⑥Time Adjusting Button: adjust the treatment time(1~60 minutes)
⑦ON/PAUSE: turn on the light/pause
⑧Screen 3: show current light frequency
⑨STOP: turn off the light,stop current treatment
⑩Frequency Adjusting Button: adjust pulse frequency of the light

Bio-Light SPL 2.0
Set Up
What’s in the package?
The Machine Power Cord User Manual
How to get started?
Power Supply: connect the machine to the power supply with the power
cord.
Adjusting Arm: adjust the arm to get a suitable place for treatment.
Treatment Head: adjust the angel of the treatment head; adjust the
distance between the LED head and the treatment area to 10cm~15cm.
Power Switch: switch on the machine

Bio-Light SPL 2.0
Operating Process
1.Put on the eye cover→2.Turn on the machine→3.Select the function(color)
4.Adjust the frequency→5.Adjust the light power→6.Adjust the treatment
time
7.Press ‘ON’to work,press again to pause→8.Press ‘STOP’to stop
CAUTIONS:
·The machine will stop automatically when the time’s over with tones.
·Clean the treatment are before the treatment starts.
·Put the cosmetics on the treatment are if needed.
·The treatment time is usually about 20 min.~30 min.

Bio-Light SPL 2.0
Clinical Recommendation
Treatment Settings:
Function
Time(Minute)
Light Frequency(Hz)
Light Power(Level)
default
Value
default
Value
default
Value
Red
20
15~30
50
70~110
(or 0)
5
7~10
Blue
20
15~30
50
70~110
(or 0)
5
7~10
Infrared
15
15~30
50
70~110
(or 0)
5
7~10
Red+Blue
20
15~30
50
70~110
(or 0)
5
7~10
Red+Infrare
d
20
15~30
50
70~110
(or 0)
5
7~10
Blue+Infrare
d
20
15~30
50
70~110
(or 0)
5
7~10
Total
20
15~30
50
70~110
(or 0)
5
7~10
When the light frequency is 0, it means the light is working continuously.
Functions:
Red Light: Anti-aging, rosacea, flushing, stimulates the collagen, smoothes skin
Blue Light: Acne treatment, anti-inflammatory
Infrared Light: Anti-aging,Photo rejuvenation, deeper stimulation
Red+Blue: Effective acne treatment, clears and smoothes skin,
anti-inflammatory, anti-bacterial, reduced chance of scarring
Red+Infrared: Reduce fine lines and wrinkles,clear blemishes and spots,
Increase size and number of collagen,improves elastin,rejuvenates Skin
Blue+Infrared: Acne treatment and smoothes skin
Total: Red+Blue+Infrared, for anti-aging,photo rejuvenation,skin smoothing
Your skin might be dry after Bio-Light treatment.

Bio-Light SPL 2.0
Environmental Condition
Environment
Temperature
Operation: 10℃to 40℃(50℉to 104℉)
Storage: -15℃to 70℃(5℉to 158℉)
Transportation: -15℃to 70℃(5℉to 158℉)
Humidity
Operation: 30% to 90% non-condensing
Storage: 30% to 90% non-condensing
Transportation: 30% to 90% non-condensing
Aaaa
Bio-Light SPL 2.0
Daily Maintenance
Don't use or put the machine in a place that doesn't match the
environment conditions.
Cut off the power supply after treatments; Pull out the power cord if you
will not use the machine in quite a long time.
If you will not use the machine in several days, cover the LED treatment
head with a piece of clean cloth or plastic paper.
Avoid any damage to the LEDs.
Clean the LED treatment head constantly. Cut off the power supply and
make sure the treatment head cool down before cleaning it.
Don't use gasoline, alcohol, diluent or rag through chemical treatment to
clean the treatment head and the surface of the machine.
Make sure the treatment head dry before use it again.