
ENG
3
E-335B
User Manual
Fig. 1.
DESCRIPTION
a Charging сase LED indicator
bHeadphones LED indicator
c Multifunction sensor button
d Magnetic contact with charging case
e Charging case
f TYPE-C jack for battery charging
SAFETY PRECAUTIONS
•Don’t use the stereo headphones while driving.
•Don’t use the stereo headphones at high volume for a long time (more than 15 minutes),
as this may cause hearing impairment.
SPECIAL FEATURES
•Bluetooth wireless signal transmission
•Touch control of incoming calls and track switching
•Battery operation time up to 3 hours
•Operating time using a charging case up to 12 hours
CONNECTION
First connection
•Remove both headphones from the
charging case, then put them back to the
case to activate the headphones.
•If there is a protective film on the
contacts, you must remove it before
using the headphones.
•The battery in the headphones and
case is used as an integral part of the
device. Before using for the rst time,
make sure that the headphones are
fully charged. If the headphones are
discharged, they need to be fully charged
(see headphone charging section).
Headset to a device interfacing
•It is necessary rst to interconnect
the device with a signal source (see
the connection diagram in Fig. 2) to
transfer signals via Bluetooth. To pair
the headphones with the device, put
them to the charging case, then get them
out. Both earphones are automatically
switched on and connected to each
other. At the same time on the right
earphone LED indicator b will alternate
blue and red glow, and indicator bon
the left earphone will light blue.