Svive LUNA S100 User manual

S100
LUNA
CHASSIS
SIDE WINDOW
PSU SHROUD
RADIATOR
SUPPORT
USB 3.0

SPECIFICATIONS
•Model: G1
•Case type: Middle tower ATX
•Chassis size (LxWxH): 400x190x446
•Weight: 4.3kg
•Drive Bays: ODD Bay x 1
3.5” HDD x 2, 2.5” SSD x 2
•Acrylic side: Acrylic le
•I/O Pos: Headphones x 1, Mic x 1
USB 2.0 x 2, USB 3.0 x1, TF/SD card
SPECIFICATIONS
•Expansion card slots: 7 slots
•Motherboard compatibility:
ATX/M-ATX/Mini-ITX
•Power Supply compatibility:
Standard ATX/ATX12V
•PCI/AGP card compatibility: L = 350mm
•CPU cooler compatibility: H = 153mm
•PSU compatibility: L = 200mm

3.5” / 2.5” DEVICES INSTALLATION
How to Install 3.5“ HDD
•Fix 3.5” HDD into the 3.5” conveer bracket.
•Slide the bracket backto the 3.5” drive bay
and lock it.
How to Install 2.5“ SSD
•Use the screw to fix 2.5” SSD on the tray.
•Then mount it on the 2.5’’ bay area.

INSTALL POWER SUPPLY
•Use 4 pcs 6x6 hexagon screw to fix the power
supply.
INSTALL MAINBOARD
•Lay down the case.
•Align the stand-o holes of the mainboard
with the mainboard tray and screw in the
stand-os.
•Make sure the holes on the mainboard and
chassis line up properly before securing the
screws.

INSTALL PCI
•Take o the PCI slot and inse the PCI device.
Put back the PCI slot and fasten the screw.

ODD
•Pull the CD cover and fix CD-ROM.
FAN/RADIATOR
Cooling
120mm
Front 2 x (optional)
Top 2 x (optional)
Rear 1 x (optional)
Liquid cooling (radiator thickness: up to 32mm)
120mm 240mm
Front (optional)
Top (optional)
Rear (optional)

HD Audio connection
AC’97 Audio connection
USB 2.0 connector
USB 3.0 connection
AUD_GND
PRESENCE#
SENSE1_RETURN
SENCE2_RETURN
PORT1L
PORT1R
PORT2R
SENSE_SEND
PORT2L
KEY
AUD_GND
KEY
N/C
MIC
MIC_BIAS
FP_OUT_R
FP_OUT_L
N/C
FP_RET_R
FP_RET_L
#6-32 screw for HDD and PSU
M3 screw for SSD and Mainboard
screw for HHD
Stand-off for mainboard
Cabletie for cable management
CABLE CONNECTION GUIDE
ACCESSORY KIT

Impoed by Svive, Østre Kullerød 4, N-3241 Sandeord, Norway Made in China www.svivelife.com