Svive LUNA S800 User manual

S800
LUNA
CHASSIS
TEMPERED
GLASS
3 X 120MM
FANS
RADIATOR
SUPPORT
ALUMINIUM
DESIGN

SPECIFICATIONS
•Dimension: 204mm (W) x 426mm (D) x 437mm (H)
•Material: Body, built with 2.0mm aluminium magnesium alloy
Internal structure, 1.0mm SGCC steel plate
The side panel, made from 5mm tempered glass or 2mm aluminium plate
•Motherboard: ATX, MATX, ITX
•Drive bay: 2 x 3.5”, 4 x 2.5”
•Front I/O po: USB 3.0 x 2, USB 2.0 x 2, Audio x 1, MIC x 1
•Power supply: PSII (modular or non-modular PSU which is shoer than 170mm)
•CPU cooler: Not higher than 162mm
•Display card: Not longer than 310mm
•Expansion slot: 7
•Cooling system: Top, 2 x 120mm fan (built-in)
Back, 1 x 120mm fan (built-in)
Boom, 2 x 120mm fan (optional)
•Weight: Net 9.3kg/gross 10.80kg

Lay the case flat,
unscrew 8 screws to
remove the glass side
panel.
Push the top plate to
take it out, then lock the
PSU with screws.
Install I/O plate, then
install motherboard and
fix with screws.
INSTALLATION GUIDE

Loosen the PCI cover,
take out the PCI plate.
Install display card
(fixed with screw)
Install shockproof HDD
gaskets (fine thread
screws for SSD, coarse
thread screws for HDD)
INSTALLATION GUIDE

•Two 2.5 HDDs can be
installed in le side.
Two 2.5 HDDs and
two 3.5 HDDs can be
installed in the right side.
Installing suppoed
cooling system.
INSTALLATION GUIDE

Install the fan on the
water cooler, then lock it
with toolless screws from
the boom.
Lay th case flat and
install the glass side
panel, assembly finished.
INSTALLATION GUIDE
How to install 240 water cooler on the boom.

Impoed by Svive, Østre Kullerød 4, N-3241 Sandeord, Norway Made in China www.svivelife.com