Swann SP26050N User manual

Blender & Mill
Model: SP26050N
Helpline
01733 404703 v1.0
SP26050N_IM.indd 1 30/06/2015 09:07

2
When using any electrical appliance, basic safety precautions should always be followed
including the following:
• Always ensure that the voltage on the rating label corresponds to the mains voltage in
your home
• Incorrect operation and improper use can damage the appliance and cause injury to the
user.
• This appliance can be used by children aged from 8 years and above if they have been
given supervision or instruction concerning use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and user maintenance shall not be made by
children unless they are older than 8 and supervised. Keep the appliance and its cord out
of reach of children aged less than 8 years. Check the power cord and plug regularly for
any damage. If the cord or the plug is damaged, it must be replaced by the manufacturer
or qualified person in order to avoid an electrical hazard.
• Do not use the appliance if it has been dropped or damaged in any way. In case of damage,
take the unit in for examination and/or repair by an authorised service agent.
• Never immerse the unit in water or any other liquid for cleaning purposes.
• Remove the plug from the socket by gripping the plug. Do not pull on the cord to disconnect
the appliance from the mains. Always unplug the unit when not in use, before cleaning or
when adding or removing parts.
• The use of accessory attachments that are not recommended or supplied by the
manufacturer may result in injuries, fire or electric shock.
• Do not let the cord hang over the edge of a table or counter. Ensure that the cord is not
in a position where it can be pulled on inadvertently.
• Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or
electric burner or in a heated oven.
• Do not use the appliance on a gas or electric cooking top or over or near an open flame.
• Use of an extension cord with this appliance is not recommended. However, if it is necessary
to use an extension lead, ensure that the lead is suited to the power consumption of the
appliance to avoid overheating of extension cord, appliance or plug point. Do not place the
extension cord in a position where it can be pulled on by children or animals or tripped
over.
• This appliance is not suitable for outdoor use. Do not use the appliance for anything other
than its intended use.
• Do not carry the appliance by the power cord.
• Do not leave the appliance unattended during use. Always unplug the unit when not in use
or before cleaning.
• Always operate the appliance on a horizontal, even, stable surface. Do not place the unit
on a hot surface.
• Ensure that the unit is switched off after use.
• The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
• In case of technical problems, switch off the product and do not attempt to repair it
yourself. Return the appliance to an authorised service facility for examination, adjustment
or repair. Always insist on the use of original spare parts. Failure to comply with the above
mentioned precautions and instructions, could affect the safe operation of this product.
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE
SP26050N_IM.indd 2 30/06/2015 09:07

3
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE
• Your appliance must never be switched on through an external timer or any kind of
separate remote control system
• This appliance is intended to be used in household and similar applications such as:
staff kitchen areas, in shops, offices and other working environments; farm houses; by
clients in hotels, motels and other residental type environments; bed and breakfast type
environments.
• Do not touch moving parts with fingers or any utensil during operation!
Description: Blender & Mill
Model: SP26050N
Input Voltage: 230V
Frequency: 50Hz
Power consumption: 400 Watts
TECHNICAL DATA
PARTS
1. Cap
2. Plastic lid with feeding hole
3. Jar
4. Plastic ring
5. Blades and spin base
6. Motor drive coupling
7. Motor housing
8. Switch
9. Mill cover
10. Blade base
SP26050N_IM.indd 3 30/06/2015 09:07

4
HOW TO USE
Before first use, ensure all packaging materials are removed and wash jar & mill in
warm soapy water. Rinse & dry thoroughly. Before attaching anything to the base,
make sure the power cord is unplugged from the power outlet and the speed selector
is in “0” position
• On a stable work surface, set lid onto jar and turn it anti-clockwise until you hear
it click. To remove the cap from feeding hole, turn it clockwise.
• Put the assembled blender jar with lid into the appliance base and turn it tightly
anti-clockwise. The interlock safety switch will then be connected automatically.
NOTE: The blender will not operate unless the jug is correctly attached to the
base.
• Turn the jar clockwise and remove it from the Base. Turn the lid clockwise and
remove it from the blender jar.
• The jar has a capacity of 1.5 litres. Do not overload the Jar or exceed the MAX
level
SP26050N_IM.indd 4 30/06/2015 09:07

5
HOW TO USE
We Swan Products Ltd declare that this product conforms to the following product legislation in
accordance with the following directive(s):
• 2004/108/EEC The EMC Directive (the Electromagnetic Compatibility Directive).
• 2006/95/EC. The LVD Directive (Low Voltage Directive).
• 2011/65/EU. The RoHS directive (Restriction of Hazardous Substances Directive)
• EC 1935/2004 Food Contact
• 2009/125/EC Eco Design Directive
DOCUMENTATION
• NEVER RUN EMPTY THIS MAY BURN THE MOTOR OR DAMAGE THE BEARINGS.
• Turn the Speed selector to “1” or “2” position and within repeat the operation
until desired results are reached.
• The pulse level gives you fingertip control over short food processing jobs, when
turn the Speed selector to “P”, the machine will run at high speed .
• Turn to “0” to stop the machine.
Using the Mill
• Set the capsule and put coffee beans, seed, herbs or spices that you want to mill
into the capsule and cover it. Don’t fill the mill more than 80% full.
• Set the Speed Knob to the desired speed position, turning it clockwise.
• Turn the capsule clockwise and remove it from the base.
• Remove the Cover. Pour out the coffee or other powder that you milled.
Notes:
• The appliance should only be run for 60 seconds when using the blender and 30
seconds when using the grinder mill. This should be more than adequate for any
use.
• Before it’s used again, allow the motor to cool for at least 2 minutes
• Turn the Speed Selector to “0” position once the blending/milling is completed
and unplug the cord from the wall outlet.
• This appliance can also mix around 500g of ice with care.
Cleaning
NEVER IMMERSE THE BASE IN WATER OR ANY OTHER LIQUID. ALWAYS SWITCH OFF AND
UNPLUG THE APPLIANCE BEFORE CLEANING
• The blender jar, lid and mill attachments can be washed in warm soapy water, rinsed
and dried thoroughly. We don’t recommend washing in the dishwasher because the high
temperatures can dull the clear plastic parts.
• The base can be cleaned with a soft cloth moistened with a mild detergent solution.
• Do not use strong chemical or abrasive cleaning agents
SP26050N_IM.indd 5 30/06/2015 09:07

6
WARRANTY
This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty
materials of workmanship the faulty products must be returned to the place of purchase. Refunds or
replacement is at the discretion of the store.
The following conditions apply:
• The product must be returned to the retailer with proof of purchase.
• The product must be installed and used in accordance with the instructions contained in this
instruction guide.
• It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
• Swan Products Ltd has limited liability for incidental or consequential loss or damage.
• This guarantee is valid in the UK and Eire Only.
The wires in the mains lead are coloured in accordance with the following code:
BLUE NEUTRAL
BROWN LIVE
As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings
identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red.
WARNING: THIS APPLIANCE IS DOUBLE INSULATED. DO NOT CONNECT ANY WIRE TO THE EARTH
TERMINAL
BS PLUG
DISPOSAL OF UNIT
Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You
are required to dispose of old electrical and electronic appliances like this separately.
Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to information
about the recycling of electrical items. Please visit www.weeeireland.ie for access to information
about the recycling of electrical items purchased in Ireland. The WEEE directive, introduced in
August 2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange
to take this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life.
SP26050N_IM.indd 6 30/06/2015 09:07

7
SWAN BRAND HERITAGE
In 1933 Swan were the first to develop an
electric heating element t hat could be
immersed in water.
This led to the Swan
kettle range that could boil up to six pints
of water in just over nine minutes - pretty
hot for the time! These days it takes about
two minutes for a Swan kettle to boil.
SP26050N_IM.indd 7 30/06/2015 09:08

www.swan-brand.co.uk
Copyright © Swan Products Ltd.
PO Box 3117, Stoke-on-Trent ST4 9GD
Est.1931
We love
what we do
s
2year
GUARANTEE
we’re proud
of our quality
Scan this QR code
to hear about
our story
Find us on Facebook
*
* on selected products
SP26050N_IM.indd 8 30/06/2015 09:08