Swann Stealth SP39040BLKN User manual

Model: SP39040BLKN
Help line 0333 220 6050 v1.0
SMART BLENDER
SP39040BLKN_IM.indd 1 21/09/2020 13:36

2
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE
WHEN USING ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR BLENDER
• WARNING: To protect against electrical shock, do not
submerge the appliance or allow the power cord to come
into contact with water or any other liquid.
• This appliance can be used by children aged from 8 years
and above if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and user
maintenance shall not be made by children unless they are
older than 8 and supervised. Keep the appliance and its cord
out of reach of children aged less than 8 years. Check the
power cord and plug regularly for any damage. If the cord or
the plug is damaged, it must be replaced by the manufacturer
or qualified person in order to avoid an electrical hazard.
• Never let the appliance operate unattended.
• Remove the power cord from the electrical outlet when
not in use, before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power cord.
• DO NOT abuse the power cord. Never carry the appliance
by the power cord or yank it to disconnect from electrical
outlet; instead grasp the plug and pull to disconnect.
• DO NOT operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, has been dropped or
damaged in any manner.
SP39040BLKN_IM.indd 2 21/09/2020 13:36

3
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE
• If the power cord is damaged, it must be replaced by the
manufacturer, a certified service agent or similarly qualified
persons in order to avoid a hazard.
• DO NOT let the power cord hang over the edge of table or
counter or touch hot surfaces such as the stove.
• Always use appliance on a dry, level surface. Sinks, draining
boards or uneven surfaces must be avoided.
• Keep hands, hair, clothing, as well as utensils out of jar while
processing to reduce the risk of severe injury to persons or
damage to the appliance. A scraper may be used but only
when the appliance is not running.
• CAUTION: Blade assembly is sharp, handle with care. When
handling the blade assembly, always hold by the base of the
blade assembly.
• Avoid contact with moving parts.
• DO NOT attempt to sharpen blades.
• DO NOT use the appliance if blade assembly is bent or
damaged.
• To reduce risk of injury, never place the blade assembly on
the base without the proper attachment.
• DO NOT operate this appliance on or near any hot surface
(such as gas or electric burner or in a heated oven).
• The use of attachments or accessories not recommended
or sold by the manufacturer may cause fire, electric shock
or personal injury.
• DO NOT remove the jar from the motor base while the
appliance is running.
• To reduce the risk if injury, NEVER operate the appliance
without the blade assembly in place; DO NOT try to defeat
SP39040BLKN_IM.indd 3 21/09/2020 13:36

4
the interlock mechanism; make sure that the attachment is
properly installed before operating the appliance.
• DO NOT expose jars to extreme temperature changes.
• CAUTION: DO NOT PROCESS HOT FOODS OR HOT
LIQUIDS. RAPID STEAM EXPANSION CAN CAUSE
SERIOUS INJURY!
• DO NOT overfill.
• DO NOT operate the appliance empty.
• If the appliance overheats, a thermal switch will become
activated and shut off the motor. To reset, unplug the
appliance and let it cool down for approximately 30 minutes
before using again.
• THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
Do not use this appliance for anything other than its intended
use. Do not use outdoors.
• Check the voltage indicated on the appliance corresponds
to the local mains voltage before you connect the appliance.
• Never immerse the motor unit in water or any other liquid,
or rinse it under the tap. Use only a moist cloth to clean the
motor unit.
• Unplug the appliance immediately after use.
• Make sure the blade is securely fastened to the accessories
before you assemble them onto the motor unit.
• Do not attempt to repair or disassemble the appliance.
There are no user-service able parts inside.
• Extreme caution is necessary when moving any appliance
containing hot liquids.
• Do not put the jars in a microwave.
BEFORE YOU ASK: Yes the jars are BPA Free!
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE
SP39040BLKN_IM.indd 4 21/09/2020 13:36

5
Description: Blender
Model: SP39040BLKN
Input Voltage: 220-240V
Frequency: 50Hz
Power consumption: 1000-1200 Watts
TECHNICAL DATA
YOUR BLENDER
AB
C
DE
F
A. Seal lid
B. Sip & seal lid
C. 0.8L jar
D. 0.5L jar
E. Motor base
F. Blade assembly
BEFORE FIRST USE, unpack the product and remove all
packaging. Wash the removable parts (except the motor
base) in warm soapy water. Rinse and dry thoroughly.
This affords you the oppotunity to become familiar with
how all the parts fit together.
CAUTION: Take care when handling the blade assembly
(F). It is very sharp!
SP39040BLKN_IM.indd 5 21/09/2020 13:36

6
ASSEMBLY
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5
SP39040BLKN_IM.indd 6 21/09/2020 13:36

7
HOW TO USE
1. Place the motor base on a clean, dry, level surface such as a counter or table
top.
2. Make sure the unit is unplugged.
3. Add ingredients to the jar.
4. Place the blade onto the jar and twist it on tightly until you have a good seal.(Fig.
2)
5. Turn the jar upside down and place it onto the motor base, aligning the tabs on
the jar with the motor base, aligning the tabs on the jar with the motor base.
Turn it clockwise, the unit is ready for use.(Fig. 4)
6. When you have reached your desired consistency, stop the appliance by turning
the jar counterclockwise (Fig. 4) and pull straight up to remove.(Fig. 5) NOTE:
Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill
line.
7. Turn the jar upright and remove the Blade Assembly by twisting the blade as-
sembly counterclockwise. Be sure to store the Blade Assembly is attached to
an empty jar when not in use to prevent accidental injury..
8. Place the Sip & Seal lid onto the jar, twist to seal and enjoy!
9. Make sure that the motor base is unplugged when not in use.
SAFETY FEATURES
Built-in safety lock
The blender has a built-in safety lock feature. This ensures that you can only switch
on the appliance while the cup and the blade subassembly are assembled on the
motor base securely. If the appliance is correctly assembled, the built-in safety lock
will be unlocked. The motor will not run if the cup and blade are not correctly as-
sembled or fitted.
IMPORTANT: In the base of each blade’s collar, there is a silicone gasket seal that
creates an airtight fit with the jars. After washing and before each use, always
check to make sure the gasket is properly in place.
WARNING: Do not operate the motor continuously for more than 60 seconds at a
time. Allow the motor to rest for 180 seconds before continuing.
NOTICE: If the blade is not running smoothly, stop the product and add some liquid,
or reduce the ingredients in the cup.
NOTE: To prevent product overheating, dry ingredients must not be processed for
more than 30 seconds at a time.
SP39040BLKN_IM.indd 7 21/09/2020 13:36

8
SUGGESTED USES
PURPOSE SUGGESTED JAR TYPE OF FOOD
Chopping/pulsing 800ml Salsa, leafy herbs
Mixing Either Batters, dips
Sauces Either Vinaigrettets
Salad Dressings
Simple Sauces
Frozen blending Either Ice, frozen fruit, ice
cream
Nutrient juices/
smoothies
Either Fruits, vegetables, leafy
greens/nuts
CAUTION: Make Sure that the motor base is unplugged from the power source
before inserting or removing any attachment and before cleaning. Wait until the
blender has cooled down sufficiently before cleaning it.
CAUTION: DO NOT immerse the motor base into water or any liquid, or place into a
dishwasher.
• Separate/remove all parts from each other.
• Clean the motor base with a slightly damp cloth and wipe dry
• Place jars in the dishwasher. Place the lids and attachments on the top rack.
Use caution when handling the blade assemblies as the blades are very sharp.
• Whenever possible, rinse parts immediately after processing to make cleanup
easier.
• Store the product in a cool, dry place.
NOTE:
You may also wash the jars by filling the jar to the Max fill line with warm (NOT HOT)
water and drop of dish washing detergent, placing the blade assembly on the jar
and pulsing a few times. Do not fill the jar more than Max fill line with water because
it will overflow. Once clean, remove the jar from the motor base. Rinse the jar, at-
tachment and lid under running water. Allow all the parts to dry before storing.
Don’t use chemical or abrasive cleaners please!.
CLEANING AND MAINTENANCE
SP39040BLKN_IM.indd 8 21/09/2020 13:36

9
The wires in the mains lead are coloured in accordance with the following code:
BLUE NEUTRAL
BROWN LIVE
As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings
identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red.
WARNING: THIS APPLIANCE IS DOUBLE INSULATED. DO NOT CONNECT EITHER WIRE TO THE EARTH
TERMINAL IN THE PLUG
BS PLUG
WARRANTY
This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty
materials of workmanship the faulty products must be returned to the place of purchase. Refunds or
replacement is at the discretion of the store.
The following conditions apply:
• The product must be returned to the retailer with proof of purchase.
• The product must be installed and used in accordance with the instructions contained in this
instruction guide.
• It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
• Swan Products Ltd has limited liability for incidental or consequential loss or damage.
• This guarantee is valid in the UK and Eire Only.
SPARES AND ACCESSORIES
Please use the following references when ordering spare parts:
SP39040N-01: Lid seal
SP39040N-02: Sip & seal lid
SP39040N-03: Large cup
SP39040N-04: Small cup
SP39040N-05: Blade assembly
www.swan-brand.co.uk
SP39040BLKN_IM.indd 9 21/09/2020 13:36

10
DISPOSAL OF UNIT
Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You
are required to dispose of old electrical and electronic appliances like this separately.
Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to information about
the recycling of electrical items. Please visit www.weeeireland.ie for access to information about
the recycling of electrical items purchased in Ireland. The WEEE directive, introduced in August
2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange to take
this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life.
SWAN BRAND HERITAGE
In 1933 Swan were the first to develop an
electric heating element t hat could be
immersed in water.
This led to the Swan
kettle range that could boil up to six pints
of water in just over nine minutes - pretty
hot for the time! These days it takes about
two minutes for a Swan kettle to boil.
Did you know...
SP39040BLKN_IM.indd 10 21/09/2020 13:36

11
NOTES
SP39040BLKN_IM.indd 11 21/09/2020 13:36

www.swan-brand.co.uk
Copyright © Swan Products Ltd.
PO Box 3117, Stoke-on-Trent ST4 9GD
SP39040BLKN_IM.indd 12 21/09/2020 13:36