Swann SW214-ODC User manual
Swann Communications warrants this product against defects in workmanship and material
for a period of one ( ) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour, or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or
the remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
shipping from and to any country
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of, or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person, or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only, and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence of misuse
or abuse of the device will render all warranties void.
1
product The
end user is responsible for all shipping costs incurred when
product
product
Help Desk / Support Details
OutdoorCam
Weatherproof Outdoor Camera
with Night Vision
If this device does not work when you first plug it in,
do not take it back to the store.
Installation Guide
Warranty Information
www.swannsecurity.com
English
4
All Countries E-mail:
UNITED STATES toll free
USA Exchange & Returns
AUSTRALIA toll free
International
1-800-627-2799
1-877-274-3695
(Sun-Thurs, 2pm-10pm US PT)
562-777-2551
(Mon-Fri, 9am-5pm US PT)
1300 13 8324
(Mon-Fri, 9am-5pm Aus ET)
+61 3 8412 4610
(Mon-Fri, 9am-5pm Aus ET)
See http://www.worldtimeserver.com for information on different time
zones and the time in Melbourne Australia compared to your local time.
Telephone Helpdesk
New Zealand toll free
0800 479 266
(Mon-Fri, 9am-5pm Aus ET)
Contact the Swann Helpdesk using our fast e-mail service
or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Including interference that may cause undesired operation.
The Outdoorcam camera is designed for use with any TV, VCR, Security Monitor or computer with a video
capture card. The camera has a visual image and can be used indoors or in a sheltered position outside. The
can be used for a variety of purposes including monitoring callers at the door, keeping
your car, yard, shop or warehouse under observation or used as a camera to monitor your baby.
Outdoorcam camera
1.
2.
Camera with Stand and fixed cable
DC Power Adaptor (adaptor design varies depending on country)
1.
2.
3.
4.
5.
Once you have chosen the best position for the camera, switch the power to the
camera off, and unplug the power lead from the camera.
When mounting the Outdoorcam camera to your ceiling or wall, please ensure
that you rotate the camera so that at the top of the camera lens is ‘up’, otherwise
you will find that your pictures are displayed upside down. (see diagram)
Hold the camera base in the position you wish to fix it, and mark the holes with an
appropriate pen or pencil. Once this is done, remove the stand and drill a hole
with the appropriate drill bit for the material you are mounting your camera to and
the screws or fasteners you are using.
Run the camera cable back to the TV/VCR, any holes that you drill need to be at
least / ” (14mm) in diameter to allow the connectors to pass through.
Reconnect the power lead to the camera and switch the camera power back on.
9
16
6. Position the camera and firmly lock the stand into place. Do not over tighten or
forcefully adjust the camera once it has been correctly positioned.
1 2
Your is designed to transmit high quality color or black and white(depends on model
purchased) images during daylight and B&W images at night to your television. To help guide you through the
process of setting up the , we have outlined the steps and numbered each of the
components required in the diagram below.
Outdoorcam camera
Outdoorcam camera
* To extend the operating distance from your TV or VCR you will need to purchase an A/V extension cable
(sold separately) which are available at most electronics stores.
: We do not recommend extending the cable length past 100 metres with a single cable run to avoid loss of signal.
Multiple cable sections connected to make up one cable length will drastically reduce the video signal run distance.
Note 330 Feet/
YELLOW
VCR, TV or MONITOR
OUT
IN
VIDEO
VIDEO
AUDIO
AUDIO
VIDEO IN 2
BLACK
POWER
CONNECTOR
3
4
1
CAMERA
POWER
ADAPTOR
5
Step 1:
Step 2: yellow "Video In"
Step 3: black black
power adaptor
Step 4: power adaptor
Step 5: A/V TV TV AV
TV VCR
VCR A/V Input TV
VCR
Note:
Note: instructions VCR TV
A/V inputs.
At the end of your Outdoorcam camera cable you will find two colored plugs:
•Yellow (Video RCA)
•Black (DC Power)
Plug the RCA plug (1) into the input (2) (usually located at the back of your TV
or VCR).
Connect the plug (3) at the end of your Outdoorcam camera into the plug at the end
of the (4).
Plug the (5) into the mains power point in your wall.
If you have an with RCA sockets you will need to switch the to the channel on
your to view the camera. To connect the Outdoorcam camera to your , you will need to
turn the to the selection and turn your onto the channel you would normally
use to view a tape or movie on your . This channel may be activated by a button on your
remote that is marked with this symbol , or or or possibly or .
The Outdoorcam will automatically turn on the Infra-Red LEDs when available light is too low to
support a clear picture.
Please read the for your or for more information on using their
LL2 AVAV211
Installation Instructions
Contents and Parts Identification
How to connect Outdoorcam camera to your TV or VCR
2
How to connect Outdoorcam camera to your TV or VCR
Mounting the camera on your wall or ceiling
3
Other Swann Other manuals
