Switch-Ed SWD-50013-KT User manual

V2
SWD-50013-KT
INSTRUCTION MANUAL
3 M RGB LED
STRIP LIGHT KIT
Please read these instructions carefully and retain for future reference.

INTRODUCTION
2
• Prior to assembly, check contents of the kit and its integrity
• Do not use the product in case of damage!
• Ensure power is switched off before installation
• When assembling, make sure that the cables are connected correctly
• Do not use the LED strip wrapped or rolled up.
• Make sure polarity is correct when inserting the battery into the IR Remote
• Disassembly of the AC Adaptor and controller housing is prohibited and can be fatal.
• Light Source: 30 LED / M SMD5050-RGB
• Colour: RGB
• RGB Mode: Flash, Strobe, Fade, Gradual, Single Colour and White
• Brightness: 330 lm / m
• Voltage Input: DC 12 / 24 V
• Rated Power: 7.2 W / M
• IP Rating: IP65
• Lifespan: 50 000 Hours
• Product Dimensions: Length 3 M
• Voltage : 5 - 24 V
• Max Power : 72 W (12 V)
• Operating Temperature : -20 -60 °C
• Remote Type : IR
• IP Protection : IP20
LED STRIP LIGHT SPECIFICATIONS
IR REMOTE CONTROLLER SPECIFICATIONS

CONTROLLER
3
Number of
Buttons
Function Function Description
1 Brightness up /
down
Brightness can be changed for static colours
and speed for alternating colours
2 Power On / Off Turn LED Strip on or off
3 Lighting Effects Continuous Flashing
4 7 Colours change continuously without
transition: red - green-blue-yellow-cyan-purple
and white
5 7 Colours are constantly changing with a
transition: red - green-blue-yellow-cyan-purple
and white
6 The red - green and blue colours alternate with
a transition
7 Static Colours Effect - Free lighting colours

2
INSTALLATION INSTRUCTIONS
4
1.2 m
10 mm
3 mm
3 m

5
• Before Cleaning: Ensure that your Switched RGB LED Strip Light is turned off
before cleaning or maintaining your device.
• Cleaning: Wipe down the surface of your Switched RGB LED Strip Light using a
soft, slightly damp cloth.
• Do not use any harsh or abrasive cleaning chemicals or materials on your Switched
RGB LED Strip Light; doing so may damage or scratch the surface finish.
• Do not expose your Switched RGB LED Strip Light to direct sunlight or high
temperatures for extended periods of time.
• Do not store in temperatures over 60°C.
• Do not expose the battery to excessive heat such as sunshine, fire or the like. Store
in a cool, dry place.
CLEANING AND CARING INSTRUCTIONS
• This product is not intended for commercial use and has been tested for household
use only.
• This product is not intended for use by small children, or persons with diminished
mental capabilities. Please ensure that the use of this product is monitored by a
guardian or parent.
• Never handle the RGB LED Strip Light if it has been dropped into water or
any other liquid. If the product comes into contact with water while charging, this
poses a safety hazard.
• DO NOT operate the product after it has malfunctioned, it has been dropped or
damaged in any way.
• WARNING: Always keep optional accessories, small parts and packaging out of the
reach of babies and small children, as these items may pose a choking hazard.
• Supplied with suitable power adaptor, use only with the power adaptor supplied.
SAFETY PRECAUTIONS

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT.
At the end of its working life, the product must not be disposed of as urban waste. It
must be taken to a special local authority differentiated waste
collection center or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences for the environment and
health deriving from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources. As a reminder of
the need to dispose of household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
• Never dispose of used electronics with ordinary solid waste since they contain toxic
substances.
• Always dispose of used electronics in accordance with the prevailing community
regulations that apply to the disposal of electronics. If there are no regulations
concerning electronics disposal, please dispose of the device in a waste bin for
electronic devices.
ENVIRONMENTALLY FRIENDLY DISPOSAL
6

7
This Switched RGB LED Strip Light comes with a standard 12-month limited warranty
against manufacturing defects and faults. Should your product be unboxed with any
faulty parts, poor finishing, or visible damage, or fail to perform due to a manufacturing
defect or poor workmanship, please return it with your proof of purchase
(till slip or invoice) to the Store of Purchase for an exchange, or repair, depending
on the store’s Returns Policy.
This warranty commences from the date of purchase.
Kindly retain your proof of purchase and the packaging for your warranty period.
NOTE: The warranty does not apply to a product that:
a. Has failed due to excessive wear and tear beyond what is considered to be
reasonable.
b. Has been misused or neglected.
c. Has been damaged accidentally or by Force Majeure, including fire and flooding.
d. Has been used or operated contrary to operating or maintenance instructions
outlined in this manual.
The Store of Purchase / Seller cannot accept any returned products that have not been
returned in accordance with this warranty or which do not follow their own Returns
Policy. Please refer to the Store of Purchase / Sellers Returns Policy for details.
Please contact the store of purchase if you require assistance or have queries about
your warranty.
WARRANTY

8