
Plug the
AC power cord
into the back of
your PopBox,
theninto a
120 volt plug.
ToviewPopBoxoutput,changeyour HDTV Inputsetting
to usethe PopBox HDMI or Component input.
Plug an
ethernet cable
(notincludedwithyourPopBox)
into your internet router
then into the ethernet port
on your PopBox.
Connect to the internet:
Connect to your HD television:
Plug the PopBox HDMI cable
into the HDMI slot on the back
of your PopBox and any HDMI
slot on the back of your
HD television set.
1
2
Power Up!
3
1. Connect PopBox to your HD television.
2. Connect PopBox to the internet.
3. Plug the PopBox into a wall outlet
- Then turn the PopBox on with the remote control.
quicksetup:
quickreference:
• Insert the included SD card into the slot on the back of the PopBox before
powering up.
• Make sure your Internet Router and Home Network connected computers
are turned on.
NOTE:
sd card
remote back
to open
slide the
panel down
requires
2
AAA
batteries
(included)
power on / off
mute
page up
pagedown
information
stop
play
up
right
home
skip fwd
skip back
vol. up
vol. down
pause
back
left
down
search
rewind
fast fwd
media library / apps buttons
5V3A
audio SD card HDMI USB
component video ethernet audiooptical power
reset power light IR receiver
USB notification light
front
back
INSIDE LEFT INSIDE RIGHT