Sycamore Sirius SY7690 User manual

Installaon instrucons : Sirius LED Link Lights SY7690—SY7693 TRICOLOUR
SycamoreLED.com
LS26 8XT
Technical helpline : 0113 2866686
*Please email [email protected] to register your product
1) Please read these instrucons carefully before commencing any work
2) Please retain this leaet for future reference
3) This product must be installed by a qualied electrician in accordance with the current IEE wiring regulaons
4) To prevent electrocuon switch the power o at the mains supply before installing or maintaining this ng
5) Ensure others cannot restore the electrical supply without your knowledge
The Tricolour Link Lights have three CCT Sengs: Cool White (6000K), Natural White (4000K) and Warm White
(3000K)
To cycle through the dierent colour temperatures, quickly turn the power to the unit o and back on using the
switch on the side to change to the next CCT in sequence.
To use the memory funcon on the product the link light needs to be switched o at the mains for at least 5 sec-
onds before powering back on. The unit will remember the previous CCT set.
IMPORTANT—Please read prior to installaon
INSTALLATION INSTRUCTIONS
CARE IN USE
GENERAL
Thank you for purchasing this SycamoreLED.com product. Please make sure instrucons are followed carefully prior to and during installaon and
product is not altered, otherwise warranty may not be valid. For technical support or warranty informaon please visit www.sycamoreLED.com, or call
our dedicated technical helpline [phone].
INSTALLATION
1) This product can be mounted horizontally or vercally using the xing clips provided in the pack
2) Please use cable supplied in the box to connect mains supply to the ng
3) The ng may be bu linked together to oer a connuous lighng system (max 6 ngs)
4) Never leave pins exposed as these can cause electric shocks and death
5) Choose desired locaon ensuring that the supply can be connected to a suitable electrical supply.
6) Fix relevant brackets to surface and click the light ng into posion
7) If there are ngs to be linked onto the rst ng, measure the length required and purchase an appropri-
ate link cable.
8) Restore power and check operaon
9) PTO FOR IMPORTANT DIAGRAMS
1) Please note this ng has non replaceable parts
2) Always switch o or disconnect from the mains when cleaning the product.
3) We recommend cleaning with a so dry cloth. Do not use scourers, abrasives or chemical cleaners.
1) Mains cable SY9553A required (included)
2) Link cables are also available (purchased separate);
SY9324 500mm link cable SY9556 1000mm link cable SY9325 3000mm link cable
F
OPERATION

Installaon instrucons : Sirius LED Link Lights SY7690—SY7695
MAINS INPUT connecon cable