Sygonix CC1 1557804 User manual

App Instruction Manual
CC1 – Smart WiFi Power Strip
Item No. 1557804
www.conradconnect.de

- 2 -
Contents
Conrad Connect .............................................. 3
Symbols........................................................... 3
App to device communication ......................... 4
Indicator lights on smart device....................... 4
Core functions ................................................. 5
Installation ....................................................... 6
Deinstallation................................................... 6
Multiple mobile devices ................................... 6
User account ................................................... 7
App landing page ............................................ 9
App settings................................................... 10
Software/Firmware updates .......................... 10
Adding a new device ..................................... 11
Device settings .............................................. 12
Master – Slave setup..................................... 14
Metering......................................................... 16
Overcurrent Protection .................................. 19
Control........................................................... 20
Scenes........................................................... 28
Device Reset ................................................. 30

- 3 -
Conrad Connect
Your product is compatible with the Conrad
Connect IoT platform at www.conradconnect.de .
You can set up a personal account at the given
URL.
Symbols
The following instructional symbols are used in
this instruction manual.
This triangle indicates important
instructions contained in these
operating instructions that must be
followed.
This symbol indicates that special
advice and notes on operation are
provided.

- 4 -
App to device communication
■In order to add a new device to the app,
the mobile device that runs the app and the
smart device must connect to your WLAN.
■Once a new device was added, you can
control the smart device through the app via
WLAN or mobile network.
Indicator lights on smart device
Observe the indicator lights during set up and
use of your smart device.
On/Off
On Device is powered on
Off Device is powered off
Wi-Fi
Flashing
(Fast)
Device not connected to
WLAN
Flashing
(Slowly, 30s)
Authentication failure.
Check WLAN password.
On Device connected to WLAN
4s on/ 0.25s off No client-server connection
is possible

- 5 -
Core functions
Real-time metering of power
consumption of connected load
Recording, retrieval and display of
power consumption statistics:
■Wh (W < 1000), kWh
■Cost
Turning the smart device on and
off via app over mobile or WLAN
network.
Turn the smart device on or off via
timer.
Controlling on and off times by
schedule rules.
Master and Slave assignment for
group control.
Socket reboot: smart device restarts
a connected router/access point
when the Internet connection fails

- 6 -
Installation
Apps are available for Android and iOS
mobile devices. Make sure your mobile device
satises the minimum requirements as outlined
on the app page before downloading.
1. Head to the respective app store and
download the app named "Sygonix Home"
onto your mobile device.
2. Set up a user account as outlined under
User account.
Deinstallation
If you de-install the app from your mobile
device, the settings are not lost and become
available again as soon as you re-install the
app and login with the same account details.
Settings are stored under your 'Sygonix'
account in the cloud. Refer to User account.
Multiple mobile devices
You can install the app on multiple mobile
devices and login with the same account
details to control the same set of smart devices
from different mobile devices.

- 7 -
User account
A 'Sygonix' account is required for you to
operate the smart device.
Your smart device cannot be linked to
two accounts at the same time.
Adding the smart device to a second
account will remove it from the rst
account.
Reset the smart device before linking
to another account.
Setting up a new account
1. Open the app.
2. Press Sign Up.
3. Enter user name and password, then
conrm with Sign Up.
4. A new account will be set up for you.
Wait until you receive the conrmation for
successful setup.
Logging in
1. Open the app.
2. Press Login.
-If you have logged in before, the
username and password should appear in
the corresponding elds.
-Tick Login automatically if you wish
the app to log you in when you start the
app.
3. Conrm with Login.

- 8 -
4. If you login successfully, the landing page
with the device list will appear.
-If no smart devices have yet been set up,
the device list is blank.
Account settings
On the landing page press to open the
account settings.
Account settings allow you to:
■ Add a prole picture
■Change the account name
■Change the account password
■Log out of your account
After logging out of your current account you
can log in with a different one.
Integrating with Conrad Connect
Note that your 'Sygonix' account is independent
of Conrad Connect.
If you wish to integrate your smart device
with Conrad Connect you require a separate
Conrad Connect account.
Refer to www.conradconnect.de

- 9 -
App landing page
Add new devices
App settings
Account settings
Show Devices Show Scenes
Turn device on/off

- 10 -
App settings
Press to open app settings:
Language Select app language
Price for
electricity
Select currency
Set the charge for one kWh
Manual Download operating
instructions
About
See app version and available
app updates.
Check app rmware status.
Links to www.conrad.com and
www.conradconnect.de
Software/Firmware updates
Two types of updates
There are two types of software updates
indicated in the app:
■App software updates
■Firmware updates for your smart device
The rmware of your smart device is updated
via the app.
Available rmware updates are indicated in the
app in the device list by .

- 11 -
For all rmware updates the smart
device and the mobile device that
runs the app must be connected to
the same WLAN network during the
update.
Updating rmware
1. Make sure that mobile device and smart
device are connected to the same WLAN
network.
2. Press button next to the device you
want to update in the device list.
3. In the rmware section press .
4. The rmware of the smart device will be
updated.
Updating app software
App software updates are managed as other
apps through the corresponding app store.
Adding a new device
During set-up make sure to keep the
mobile device running the app and the
smart device within receiving distance
of the wireless access point.
1. Connect your mobile device running the app
to your WLAN network.
2. Open the app and navigate to the landing
page.

- 12 -
3. Press +.
4. Select the smart device type you want to
add.
5. Follow the on-screen instructions in the app.
6. When you see the conrmation notication,
the smart device appears in the device list.
7. Add more devices or exit.
It is strongly recommended that you
set up your router or access point
(AP) to use WPA2-Personal with PSK
encryption for authentication.
Device settings
1. Select the smart device from the device list
on the landing page.
2. Press to open the device settings.
3. Adjust settings:
Name Give your device a name.
Edit
Tap on PORT (receptacle) to
rename the respective receptacle.
Tap on the icons next to Name to
select a different symbol.
Master–
Slave
Control the master-slave
relationships. See Master – Slave
setup.

- 13 -
Firmware
version
Indicates the rmware version of
the smart device.
About MAC address and serial number
of smart device
Socket
Reboot
■In case that your internet
connection becomes unstable
or disconnects, Reboot allows
the smart device to restart a
router that is connected to the
smart device.
■Enable/disable with slider
■After enabling the feature,
select which receptacles you
allow to reboot. Save the
settings with Save.
Reset to
Factory
Settings
Resets the smart device to its
factory default settings.
Refer to section Device Reset for
more information.

- 14 -
Master – Slave setup
The master-slave feature allows a user-dened
master receptacle to control allocated slave
receptacles.
There are 4 power trigger values (Peak):
■2.0 W, 5.0 W, 10.0 W, 35.0 W
If power on the master receptacle drops below
a set power trigger value, power supply to
slave receptacles is cut.
Example diagram
■Master controls slaves
■Peak: 35 W
Master
Slave
35 W Peak

- 15 -
■The diagram shows that the TV (Master)
controls the slaves: DVD player, speakers,
and light
■If the peak drops below 35 W, power supply
to slaves is cut.
■When the power on the master receptacle
raises to or above 35 W again, power
supply to slaves is turned back on.
Setting master and slaves
1. Navigate to the landing page.
2. Select the smart device from the device list.
3. Press to open the device settings.
4. Press Master–Slave.
5. To select a Master tap on Master of the
respective receptacle.
6. Select a power trigger value from the
dropdown located above the PORTS.
7. To select a slave, tap on Slave of the
respective receptacle.
8. For receptacles not to be controlled by
the master, tap on Neutral of respective
receptacles.
9. Press OK to save the new settings.

- 16 -
Metering
Every receptacle meters and records its own
power consumption. Power consumption
statistics can be retrieved at a later point in
time.
Real-time wattage
Back to Home
Real-time wattage
of all receptacles
Turn all receptacles on/off
Individual receptacles

- 17 -
Individual receptacles
Turn receptacle on/off
Real-time wattage
Press here for details

- 18 -
Energy consumption
Hours/Days/Months switch
Records Currency
Energy/Cost display
All/Individual

- 19 -
Overcurrent Protection
Activation
If the total current of the power strip exceeds
the maximum permissible current (see
operating instructions that came with your
device), the port with the highest power
consumption is deactivated automatically.
This is indicated by as shown below:
Reset
To restore a deactivated port, remove the load
that makes the total current exceed the limit
and press to activate the port again.

- 20 -
Control
Remind yourself of the possible
dangers the device you intend to
connect can pose to your environment.
Read the instruction manual that came
with the product you are going to
connect to the smart device to nd out
if it is suitable to be operated without
attendance.
If it is not, then do not use it in
conjuction with timer and schedules.
■A heater can cause re if left
unattended!
■A kettle that contains no water may
cause re!
■A coffee maker may overheat if not
turned off on time and cause re!