Symbol CRD 1500 User manual

CRD 1500 Modem/
Charging Cradle

CRD 1500 Modem/
Charging Cradle
©2001 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability,
function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Symbol products might
be used. An implied license only exists for equipment, circuits, and subsystems
contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc.
Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No. 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750;
4,673,805; 4,736,095; 4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281;
4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461;
5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149;
5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791;
5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163;
5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924; 5,337,361;
5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139;
5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893;
5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577;
5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070;
5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229;
5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152;
5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728;
5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812;
5,828,050; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146;
5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659;
5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,036,098; 6,047,892; 6,050,491; 6,053,413;
6,056,200; 6,065,678; 6,067,297; 6,068,190; 6,082,621; 6,084,528; 6,088,482; 6,092,725;
6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814;
6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; D305,885;
D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124;
D391,250; D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468;
D424,035; D430,158; D430,159; D431,562; D436,104.
Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875;
1,955,269 (Japan).
European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938;
Italy 1,138,713.
rev. 04/01

1
Quick Reference
Introduction
The CRD 1500 Modem/Charging Cradle contains an internal
MCDA modem card that enables the SPT1500 or SPT1550
terminal to exchange data with other modem-equipped systems
through analog telephone lines.The modem checks to ensure the
line is not being used before going on-line.
A Hot Sync button on the front of the cradle lets you synchronize
information on your terminal with a desktop PC. It also provides
charging capability for terminals equipped with a rechargeable
battery pack.
To use themodem, follow the cradle installation instructions in this
guide, insert your terminal in the cradle, then follow the
instructions provided with your terminal's application software.
For more information about the SPT 1500 or SPT 1550 terminal,
refer to the terminal’s Quick Reference Guide or Product
Reference Guide.
Before Setting Up
Each cradle is shipped with its specific certification and regulatory
labels. Using the wrong cradle version may cause unreliable
operation, damage to your modem, or damage to the telephone
network which may lead to prosecution.
Confirmthat you have thecorrect TelecomApproval Label applied
to your cradle as required for your region.
Version Labeling Cradle Modem
Card
European TBR 21
Australian ACA “CE” and “A-Tick” marks CRD1500-1000EU MCDA-3
AmericasFCC68
and others “Complies with Part 68, FCC Rules” and others. CRD1500-1000MC MCDA-1

2
CRD 1500 Modem/
Charging Cradle
Setting Up the Cradle
The cradle may be desk or wall-mounted. To power the cradle,
plug the power connector into the back of the cradle and the other
end to the wall outlet.
Note: Use only a Symbol-approved power supply, output
rated 8 VDC and minimum 700mA. The power supply
is certified to EN60950 with SELV outputs.
Hinweis: Benutzen Sie nur eine Symbol Technologies
genehmigt Stromversorgung in den Ausgabe: 8 VDC
und minimum 700mA. Die Stromversorgung ist
bescheinigt nach EN60950 mit SELV Ausgaben.
Installing Rechargeable Batteries
To replace the dry cell batteries in the SPT 1500 terminal with the
rechargeable battery pack:
1. Remove battery cover on rear of
terminal.
2. Pull the tether up to release the
two dry cell batteries.
3. Insert rechargeable battery pack,
making sure the tether is in place
underneath. Be sure the battery
pack is inserted in the proper ori-
entation, as shown.
4. Install new battery door (two
square holes).

3
Quick Reference
Charging the SPT 1500 Battery Pack
To charge the NiMH battery pack in the terminal:
1. Ensure the cradle is powered on.
2. Insert the terminal in the cradle.
The Terminal Charge LED turns red to indicate charging. The
terminal’s batteryis fullycharged inno morethan threehours.The
Terminal Charge LED turns green when the battery is fully
charged.
Note: Frequent insertion and removal of the terminal in the
cradle may decrease battery life.
If thebattery in the terminal islow, the Terminal Charge
LED may flicker or turn yellow during a HotSync oper-
ation. The LED returns to red when the operation is
complete.
Connecting to the Telephone Network
Your cradle supports direct 2-wire connection to the PSTN, and
indirect connection via compatible extensions ona PABX system.
Do not connect to digital lines.
Use a compliant telephone lead with RJ11 connector (line on
middle pair) to connect to the cradle, terminated with a wired local
Terminal Charge LED