SYNBONE Spine Holder Compact User manual

Product overview
Instructions for use
Spine Holder Compact
Spine Holder Compact Overview Parts
Assembling and basic setup - vertical position
Option for three vertical positions.
Insert the supporting block into the
designated holes of the Holder base
Clamping block on the bottom of the
Holder base to attach a bench vice
clamp
Option for three horizontal positions
Insert the supporting block into the
designated holes of the Holder base
Insert the supporting block in the left
holes
Insert the supporting block in the right
holes
Insert the supporting block in the
center holes
The Spine Holder can optionally be
attached to a bench vice clamp for a
rm hold during the exercise
Spine Holder Compact consists of:
1. Holder base with pins
2. Supporting block with pins
3. Rubber bands
2 3
1
1
Assembling and basic setup - horizontal position
Insert the supporting block in the left
holes
Insert the supporting block in the right
holes
Insert the supporting block in the
center holes
PN AB0029.80 / V 1.0 / November 2019

Cervical spine without occiput for
posterior access
Adjustment
How to attach cervical spine models
Cervical spine with occiput for
posterior access
Clamping the bone model
Lumbar spine with sacrum for
posterior access
Lumbar spine with sacrum for
posterior access
Lumbar spine with sacrum for
anterior access
How to attach lumbar spine models
Cervical spine with occiput for
anterior access
Thoracic spine for posterior access Thoracic spine for anterior accessThoracic spine for posterior accessThoracic spine for anterior access
How to attach thoracic spine models
Lumbar spine with sacrum for
anterior access
Instructions for use
Spine Holder Compact
Cervical spine without occiput for
anterior access
2
Thoracic spine for lateral access
Cervical spine with occiput for lateral
access
Lumbar spine with sacrum for
lateral access
PN AB0029.80 / V 1.0 / November 2019

Instructions for use
Spine Holder Compact
How to attach lumbar spine models with Pelvis
Lumbar spine with Pelvis for
posterior access
Lumbar spine with Pelvis for
anterior access
3
For a rm hold, insert the sacrum into
the notch of the holder base
For a rm hold, insert the spinous
process into the notch of the holder
base
Intended use
The Spine Holder Compact is specially designed for Spine workshops and trainings. This system holds various SYNBONE®spine models in various lengths and positions. The Spine Holder Compact can be
used for surgical education. The Spine Holder Compact is not intended to be used in the operation room.
SYNBONE®guarantees best results with the Spine Holder Compact only by using the SYNBONE®spine models. Find out more about SYNBONE®s complete product portfolio for Spine trainings on
www.synbone.com.
Clean the Spine Holder Compact with a damp cloth after each use.
Contact us
SYNBONE SDN BHD
No. 40 - 41, Jalan i-Park 1/3
81000 Bandar Indahpura Kulai, Johor · Malaysia
Phone [phone]
[email protected] · www.synbone.com
SYNBONE AG
Tardisstrasse 199
7205 Zizers · Switzerland
Phone [phone]
[email protected] · www.synbone.com
PN AB0029.80 / V 1.0 / November 2019