LeapFrog Mr. Pencil's Scribble, Write & Read User manual

®
Mr.
Mr.
Mr.
Mr. Pencil’s
Pencil’sPencil’sPencil’s Scribble,
Scribble,Scribble,Scribble,
Read
ReadReadRead
&
&&&
Write
WriteWriteWrite
Instruction Manual
This manual contains important information. Please save it for future reference.

2
INTRODUCTION
Thank you for purchasing Mr. Pencil’s®Scribble, Write & Read™!
Enter a world of fun as you play a range of educational activities.
Laugh along with Mr. Pencil®and his pals as you explore letter
and number names. You can also follow step-by-step instructions
to write letters and numbers. Finally, join Mr. Pencil®to practice
everything from identifying letter sounds and spelling full words
to writing your own name!
Off/Low/
High Volume
Selector
Activity Buttons
Number Buttons
Letter Buttons
Touch-
Sensitive
LCD Screen
Mr. Pencil®
Stylus
Settings Button
Repeat Button

3
INCLUDED IN THE PACKAGE
• One Mr. Pencil’s®Scribble, Write & Read ™
• Quick Start Guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE:
Please save this Instruction Manual as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE :
Il est conseillé de sauvegarder ce manuel d’instructions car il
comporte des informations importantes.
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.
Unlock the Packaging Locks

4
INSTRUCTIONS
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a
screwdriver to loosen the screw and then open the battery
cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 3 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
Low Battery Indicator
When the batteries run low, this icon
will appear on the screen and the unit will
power off. Remove the old batteries and
replace with a new set.
IMPORTANT NOTICE
Occasionally, the LCD touch screen may
need to be recalibrated. If this happens,
go to Settings Mode to adjust it before
resuming play.

6
PRODUCT FEATURES
1. Off/Low/High Volume Selector
Slide the Off/Low/High/Volume
Selector to turn the toy on and to adjust
the volume.
2. Touch-Sensitive LCD Screen
Touch the LCD screen to play.
3. Mr. Pencil®Stylus
Use the stylus to tap and write on the
screen.
4. Activity Buttons
Press one of the six activity buttons to
select an activity.
An X will appear in each corner of the screen and you will hear
a voice say, “Tap it!”. Use the stylus to touch each X exactly.
Another X will appear after the previous one is touched
correctly. The screen will show OK if the screen has been
calibrated correctly. If an X isn’t touched correctly, you will
hear a voice say, “Oops, tap this again.”, and the calibration
will restart. You may have to tap an X many times before it is
properly calibrated.

7
5. Settings Button
Press this button to change the contrast
of the LCD screen, turn the background
music on or off and to calibrate the LCD
touch screen.
6. Repeat Button
Press this button to repeat an instruction
or question.
7. Letter Buttons
Press these buttons to hear letter names
and sounds.
8. Number Buttons
Press these buttons to hear number
names.
9. Automatic Shut Off
To save power, Mr. Pencil’s®Scribble, Write & Read™ will
shut down after about 1 minute without input. The unit can
be turned on again by pressing any button.

8
ACTIVITIES
1. Letter Writing
Use the stylus to choose uppercase or lowercase letters.
After making your choice, press a letter button to learn how
to write the uppercase or lowercase version of it. Follow the
dotted lines. They will show you exactly how to draw perfect
letters using the correct stroke order.
2. Numbers
Same as the activity above but with numbers. Correctly
tracing a number transforms it into objects that equal the
number’s value. Tap them to count.
3. Name Writing
Tap an empty name slot to enter a name. A name can hold
up to 12 characters. Tap the name to practice spelling it. Tap
the edit button to change an existing name.
4. Reading
Use the stylus to rub away sand to find letters. Find three
letters to spell a word. Then, drag the stylus across the letters
to sound out the word. Spell and sound out three words to
complete the game.
5. Spelling
Use the stylus to choose your level.
Level 1: Letterrific!
Tap the letters as they are announced.
Level 2: Complete the Word
Drag letters into the words to complete them. Then drag the
stylus across the letters to sound out the words.

9
Level 3: Slide and Spell
Slide letters into a word to spell it. Then drag the stylus
across the letters to sound out the word. When you think
you know what the word is, tap the star. Two pictures will
appear. Tap the one that shows the word you sounded out.
6. Drawing
Use the stylus to choose Free Draw or Tracing.
Free Draw
Get creative! Tap or drag anywhere on the screen to draw.
The following icons can help:
Eraser - Tap to turn the tip of your stylus into an eraser.
Only what you touch will be erased.
Pencil - Tap to draw. Tap again to change colors.
“X” - Tap this to erase your entire drawing.
Music Note - Tap this to add your drawing into the Mr.
Pencil®Song.
Tracing
Select a drawing. Then, connect the dots in any order to
complete it. Once completed, drawings will animate in
silly ways. To automatically complete a drawing, press the
check mark.

10
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Please turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back On. The unit should now be ready to use
again.
5. If the unit is still not working properly, install a brand new
set of batteries.

11
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
[e-mail]. Creating and developing LeapFrog
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions you
might have. A service representative will be happy to help you.

12
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.

13
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6170
Product Name: Mr. Pencil’s®Scribble, Write & Read™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell Street, Suite 500
Emeryville, CA 94608
Website: leapfrog.com

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca
Read our complete warranty policy online at
leapfrog.com/legal
LeapFrog Enterprises, Inc.
A subsidiary of VTech Holdings Limited.
TM & © 2023 LeapFrog Enterprises, Inc.
All rights reserved.
Printed in China.
IM-617000-000
Version:0