Synergy Global Technology LCD2U17-08 User manual





User Manual 2U Dual Slide Short Depth LCD Console Drawer
17" / 19" 1280 x 1024 LCD
LCD2U17-03 / LCD2U19-02
Options :
- AV / DVI-D / HDMI
- Touchscreen
- DC power
17" FHD 1920 x 1080 LCD
LCD2U17-08
Options :
- HDMI
- SDI
- HDMI / DP
- Touchscreen
- DC power

Legal Information
First English printing, July 2020
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.RackmountMart.com

Contents
< Part. 1 > LCD2U17-03 / 19-02 / 17-08
1.1 Package
Content P.1
1.2 Structure Diagram & Dimension P.1
1.3 Installation P.3
1.4 Connection P.5
< Part. 2 > Specifications / OSD
2.1 Product
Specifications P.7
2.2 Keyboard / Mouse Specifications P.11
2.3 On-screen Display Operation ( OSD ) P.14
< Part. 3 > Options
3.1 LCD2U17-08
- 3G / HD / SD-SDI Broadcast-grade input
- HDMI
- 17” Touchscreen : Resistive ( 1-point touch )
- DC Power : 12V / 24V / 48V / 125V P.17
3.2 LCD2U17-03 / 19-02
- HDMI / DVI-D / S-Video + BNC
- 17” / 19” Touchscreen : Capacitive, Resistive ( 1-point touch )
- DC Power : 12V / 24V / 48V / 125V P.21
< Part. 4 > KVM Integration
4.1 LCD2U17-03 / 19-02 / 17-08 P.24
www.RackmountMart.com

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip offthe finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4
www.RackmountMart.com

P.1
LCD2U17-03 or LCD2U19-02 unit X 1
- 6ft VGA console cable X 1
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
1
2
LCD interchangeable module kit
Installation Slides
Carry handle to release the 2-pt lock
Audio speaker ( for SDI or HDMI option )
1
2
3
5
8
6
7
7
LCD membrane
Membrane switch (KVM option)
Keyboard interchangeable module kit
Mouse interchangeable module kit
5
3
6
4
4
8
LCD2U17-08 unit X 1
- 6ft DVI-D console cable X 1
( Alternative : 6ft VGA console cable )
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models.
It varies with options such as KVM, SDI, HDMI, DVI-D, AV, Touchscreen & DC power.
< Part 1 > LCD2U17-03 / 19-02 / 17-08
< 1.1 > Package Content
< 1.2 > Structure Diagram
www.RackmountMart.com

P.2
Model Product Dimension
(W x D x H) Net Weight
LCD2U17-08
LCD2U17-03 441.6 x 480 x 88 mm
17.4 x 18.9 x 3.5 inch
20.4 kg
44.9 lb
LCD2U19-02 20.5 kg
45.1 lb
The weight is only for the single console models. It varies with accessories & options .
< 1.2 > Dimension
Front View
UNIT : mm
1mm = 0.03937 inch
Top View
Side View
Rear View LCD2U17-03 / 19-02 LCD2U17-08
Power VGA
USB
AC Input
100~240V
Power VGA
DVI-DUSB
AC Input
100~240V
www.RackmountMart.com

P.3
■Fix the LCD console drawer into the rack.
Complete the installation
Step 3
■Insert the left and right rear mounting brackets into
the LCD console drawer.
Step 1
< 1.3 > Installation - How to install Installation Slides
Step 2
■Measure the depth of the front and rear mounting rails.
■Align each rear mounting bracket to a suitable length.
M6 screw, cage nut & cup washer x 8 are provided.
www.RackmountMart.com

P.4
Figure 3.
Figure 2. ■Pull and hold the black arrow button on either side
of the LCD console drawer to unlock.
(shown in Figure 2).
Figure 1.
■A black arrow release button is located on the
front of each slide. (shown in Figure 1).
■Push the LCD console drawer into the rack.
(shown in Figure 3).
Caution : Keep your fingers away from the slide
stop
www.RackmountMart.com

P.5
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning offthe power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
< 1.4 > Connection to USB Server via DVI-D cable
< 1.4 > Connection to external KVM via DVI-D cable
AC Input
100~240V
LCD Console Drawer
USB server
DVI-D
console cable
DVI-DUSB
POWER
DVI-D
USB
POWER
DVI console KVM
LCD Console Drawer
DVI-D
console cable
DVI-D
DVI-D
USB
USB
AC Input
100~240V
www.RackmountMart.com

P.6
AC Input
100~240V
< 1.4 > Connection to USB Server via VGA cable
< 1.4 > Connection to external KVM via VGA cable
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning offthe power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
VGA console KVM
LCD Console Drawer
VGA
console cable
USB
POWER VGA USB
VGA
AC Input
100~240V
POWER
USB server
LCD Console Drawer
VGA
console cable
VGA
VGA
USB
USB
www.RackmountMart.com

P.7
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption for Sin-
gle Console Screen ON Max. 22W
Power saving mode Max. 2W
Power button OFF Max. 1W
Power Consumption
with KVM integration Screen ON Max. 55W
Power saving mode Max. 34W
* For details, please refer to our KVM rear kit user manuals
LCD
Panel LCD2U17-03
Manufacturer
Panel Size ( diagonal ) 17-inch TFT color LCD 19-inch TFT color LCD
Display pixel ( dots x lines ) 1280 x 1024 1280 x 1024
Brightness ( typ. ) 250 250
Contrast Ratio ( typ. ) 1000:1 1000:1
Color 16.7 M 16.7 M
ViewingAngle ( L/R/U/D ) 85/85/80/80 85/85/80/80
Response Time ( ms ) 5 5
Dot pitch ( mm ) 0.264 0.294
Display Area ( mm ) 337.92H x 270.33V 376.32H x 301.06V
Surface treatment Haze 25%, Hard-coating
Surface hardness 3H 3H
Backlight Type LED LED
MTBF ( hrs ) 30,000 30,000
Regulatory Safety FCC & CE certified
Environmental RoHS2 & REACH compliant
Video
Connectivity Digital HDMI HDMI 1.2, CEA-861-B
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Composite ( BNC ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
< Part 2 > Specifications / OSD
< 2.1 > Product Specifications - LCD2U17-03 / 19-02
www.RackmountMart.com
LCD2U19-02

P.8
Applicable
Format DVI-D / VGA Input PC Signal 1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input PC Signal Same as VGA
Video Signal 720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
Audio Signal 2ch Linear PCM ( 32 / 44.1 / 48 KHz )
Speaker Dual Stereo Speaker, 2 x 2W
Physical
Specification Product ( W x D x H ) 441.6 x 480 x 88 mm 441.6 x 480 x 88 mm
17.4 x 18.9 x 3.5 inch 17.4 x 18.9 x 3.5 inch
Net Weight 20.4 kg / 44.9 lb 20.5 kg / 45.1 lb
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
Environmental
Conditions Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage / Non-operating Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 10~300Hz 0.5G RMS random
www.RackmountMart.com
LCD2U17-03 LCD2U19-02

P.9
Environmental
Conditions Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage / Non-operating Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 10~300Hz 0.5G RMS random
Power Power Supply Range Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption
for Single Console Screen ON Max. 14W
Power saving mode Max. 2W
Power button OFF Max. 1W
Power Consumption
with KVM integration Screen ON Max. 45W
Power saving mode Max. 34W
* For details, please refer to our KVM rear kit user manuals
LCD
Panel LCD2U17-08
Panel Size ( diagonal ) 17.3-inch Widescreen TFT
color LCD
Display pixel ( dots x lines ) 1920 x 1080
Brightness ( typ. ) 400
Contrast Ratio ( typ. ) 600:1
Color 16.7 M, 8-bit
ViewingAngle ( L/R/U/D ) 80/80/60/80
Response Time ( ms ) 5.5
Dot pitch ( mm ) 0.1989
Display Area ( mm ) 381.888H x 214.812V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 50,000
< 2.1 > Product Specifications - LCD2U17-08
Regulatory Safety FCC & CE certified
Environmental RoHS2 & REACH compliant
Video
Connectivity Digital HDMI HDMI 1.4, HDCP 1.4
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Display Port DP 1.0 / HDCP 1.3
Composite ( BNC ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
www.RackmountMart.com

P.10
Physical
Specification Product ( W x D x H ) 441.6 x 480 x 88 mm
17.4 x 18.9 x 3.5 inch
Net Weight 20.4 kg / 44.9 lb
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
Applicable
Format DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
640 x 480 x 60Hz
Audio Signal 2ch Linear PCM
HDMI Input PC Signal Same as VGA
HDMI 1.4 1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
Display port Input PC Signal 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
640 x 480 x 60Hz
Audio Signal 2ch Linear PCM
* In some circumstances, if the user connects the LCD to PC via HDMI port or video and audio signals, the LCD may display incorrectly on a
full screen. If so, please adjust the display card setting on display size to fix the issue.
www.RackmountMart.com
LCD2U17-08

P.11
Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
OS support Windows / Linux / Unix / Mac OS
< 2.2 > Standard Keyboard / Mouse Specifications
Supporting layouts
America United States
EMEA United Kingdom Germany France Spain Italy
Asia Japan Korea
www.RackmountMart.com
keyboard integrated with trackball
B
keyboard integrated with touchpad
N

P.12
< 2.2 > MAC Keyboard / Mouse Options
How to Use "MAC" Keyboard
Keyboard Features
F1
Decrease display brightness F9 Fast-forward
F2
Increase display brightness F10 Mute sound
F3
Mission control
* Only works with OS X Lion
default Keyboard Shortcuts.
F11
Decrease volume
F4
Dashboard F12 Increase volume
F7
Rewind Eject disc
F8
Play / Pause Command
Supporting layouts
America United States
www.RackmountMart.com
MAC keyboard integrated with trackball
Mb
MAC keyboard integrated with touchpad
Mn

P.13
Audio / Display Keys * Please ask your supplier for full details
F9
Audio : Mute
Display : Degauss
F11
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast
< 2.2 > SUN Keyboard / Mouse Options
Num LED in Green mode
Key pad behaves as a normal key
pad mode
Num Cap s Scro ll Comp oseNum Cap s Scro ll Comp ose
■Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
■104 key notepad keyboard with full numerical pad and SUN function
■USB interface
■US layout only
Num LED in Offmode
Key pad behaves as a SUN Solar
system administration command mode
www.RackmountMart.com
SUN keyboard integrated with touchpad / trackball
How to Use "SUN" Keyboard
SUN keyboard integrated with trackball
Sb
SUN keyboard integrated with touchpad
Sn

P.14
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Scroll through menu options and adjust
the displayed control
Display the OSD menu
Act as an Enter key to select screen setting options
Turn the monitor on or off
Membrane Switch Function
Remark : All LED touch buttons in WHITE light.
The LED of Power touch button will flash continuously when there is no signal input.
All the LED touch buttons will automatically turn offafter 10 minutes of idle status ( except the Power ).
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).
1
2
< 2.3 > On-screen Display Operation ( OSD )
www.RackmountMart.com

P.15
< 2.3 > On-screen Display Operation ( OSD )
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
Only apply on LCD2U17-03 / 19-02
www.RackmountMart.com