Synergy Global Technology LCD2U20-01 User manual

Toll Free : 1-888-865-6888
Tel : [phone] Fax : [phone]
Email : [email protected]

User
Manual
2U Rackmount LCD Keyboard Drawer
20” LCD
LCD2U20-02

l
Rev. : 1.0 P.1
1. Table Of Content
1. Table of Content P.1
2. Read Before Installation P.2
3. Introduction P.3
4. Features P.3
5. Package Contents P.4
6. Optional Accessories P.5
7. Peripheral Products P.5
8. Important Safeguards P.6
9. Structure Diagram P.7
10. Dimension Diagram P.8
11. LCD OSD Menu Operation
LCD Membrane Diagram P.9
Main Menu P.9
Sub Menu P.10-13
12. Technical Specification P.14
User Manua

l
Technical Notes
For Windows 98/98 SE systems
● HID (Human Interface Device) driver must be installed prior to using
the USB KVM switch. To install the HID driver, first connect a USB
keyboard and mice directly to computer (before installing KVM switch)
then follow the Windows installation instructions, this will install the HID
device driver and allow the use of the KVM switch.
● If a mouse recognition error is displayed during system boot:
“Windows did not detect a mouse attached to the computer.You can
safely attach a serial mouse now. To attach a mouse to a PS/2 mouse
port, you must first turn the computer off”
a) Press the Tab key once to select the check box.
b) Press the Space bar once which will place a check in the box
“Do not show this message again”
c) Press the Enter key once and Windows will continue to boot and
will then recognize the mouse.
Operating System Compatibility
● Any USB-enabled operating system such as Solaris, Windows® 98,
Windows® 98SE, Windows® 2000, Windows® XP or higher.
● Windows® 95 are not recommended because of immature USB
support.
Introduction
Note :Failure to do so may result in Windows not being able to detect
keyboard and mouse.
Rev. : 1.0 P.2
2. Read Before Installation
*All brand names, logo registered trademarks are properties of their respective owners.
User Manua

l
Rev. : 1.0 P.3
3. Introduction
4. Features
● Ultrahigh resolution 20” 1600 x 1200 TFT LCD display panel
● Standard color in purple (black options available)
● The screen direct supports most SUN native resolution, including 1152 x
900 @ 66 or 76Hz
● 104-keys SUN-compatible keyboard w/ 3 button trackball supports SUN
keys, such as Stop, Cut, Paste, Compose, Copy and Help
● Compatible with SUN, Apple, IBM, DELL, HP and USB server
● Fits all current SUN rack depths of 24” to 36” through adjustable mounting
brackets
● 12V, 24V, 48V DC power supply options
● Built-in KVM switch function for easy controlling and monitoring up to 16
residing servers/ platforms
● Support eight characters password protection and search PC server
name
● Auto scan mode for monitoring PCs and flexible scan time from 5~99
seconds
● Hot Pluggable—Add or remove computers without powering down the
switch
● Easily switch Individual button to select the PC channel using the push-
button channel selector switches, Hot Keys, or via the On-Screen Display
(OSD) Menu
Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation
S Solutions is total compatible with Solaris. The LCD screen support SUN
native 1152 x 900 & standard resolutions. SUN-compatible keyboard incor-
porates SUN system administration commands keys.
It is a combination of keyboard, mouse and monitor into a drawer, with features
such as flip-up design, adjustable brackets, built in LCD OSD to provide ef-
fective assistant for an administrator to control SUN/ PC system.
User Manua

l
Rev. : 1.0 P.4
5. Package Contents
Before Unpacking
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
● The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or
mounted into a suitable cabinet.
● Make sure the place has good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
● Convenience for connecting the LCD Keyboard Drawer to the related facilities should be
well considers too.
Unpacking
The LCD keyboard drawer comes with the standard parts shown as above. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the
supplier immediately.
LCD Keyboard Drawer 1 Piece
User Manual 1 Piece
DC Power Adapter 1 Piece
Power Cord 1 Piece
Mounting Bracket 1 Pair
Fasteners 4 Pieces
LCD-A1014 2-in-1 KVM cable 1 Piece
User Manua

l
Rev. : 1.0 P.5
6. Optional Accessories
7. Peripheral Products
Model Description
LCDK1020 1U 4-Port USB KVM Switch
LCDK1021 1U 8-port USB KVM Switch
LCDK1090 1U 16-port USB two console KVM Switch
LCDK1041 CAT.5 PS/2 KVM Extender
KVM Cable
LCD-A1014 / 15 6ft / 10ft / 15ft USB 2-in-1 cable
Cascade Cable
LCD-A1019 6ft USB Cascade cable
Others
Video Input Composite, S-Video
DC Power Input 12V/ 24V/ 48V DC Power Supply
User Manua

l
Rev. : 1.0 P.6
Please read all of these instructions carefully before you use the device.
Save this manual for future reference.
● Unplug the LCD Keyboard Drawer from the power outlet before cleaning.
● Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a
neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen
slightly with it.
● Do not expose the LCD Keyboard Drawer directly to rain, water, moisture or
sunlight.
● Avoid pressure on the LCD screen to prevent permanent damage to the display.
● Do not attempt to service the device yourself. Improper operation may void your
warranty. Refer all servicing to qualified service personnel.
● Safe storage environment of the LCD Keyboard Drawer is ranging between –20oC
and 60oC. Permanent damage could occur if the LCD Keyboard Drawer is stored
outside the safe range.
● Unplug the LCD Keyboard Drawer immediately and call qualified service
personnel under the following conditions:
1. If the monitor has been exposed to rain, liquid or water.
2. If the monitor has been dropped or the casing has been damaged.
What the warranty does not cover
1. Any product, on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature,
unauthorized product modification, or failure to follow instructions supplied
with the product.
b) Repair or attempted repair by anyone not authorized by us.
c) Any damage of the product due to shipment.
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuation or failure.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other causes which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
8. Important
Safeguards
User Manua

l
9. Structure Diagram
1. Keyboard
2. Aluminium front panel
3. Class A active matrix TFT LCD panel
4. Rear metal case
5. LCD inverter
6. LCD membrane
7. Ball bearing telescopic slides with stopper
8. Adjustable mounting bracket
9. KVM switch module & membrane (KVM option only)
cdefg
ijhk
k
Rev. : 1.0 P.7
User Manua

l
10. Dimension Diagram
Rev. : 1.0 P.8
Side View
Front View
Top View
20” LCD
2U 20” LCD Keyboard Drawer
User Manua
LCD2U20-01

l
Rev. : 1.0 P.9
11. LCD OSD Menu Operation
LCD Membrane Diagram
Left Right Auto Config
Menu/SelectionPower
Main Menu
Image
● To enter into the Brightness, Contrast, Sharpness, Saturation, Hue sub-
menu
Geometry
● To enter into Auto Conflg., H. Position, V. Position, Clock, phase sub-menu
Function
● To enter into the OSD Position, OSD Zoom and Color Temp. sub-menu
System
● To enter into the Language, Time, Power OFF and Reset sub-menu.
User Manua

l
11. LCD OSD Menu Operation
Image
Brightness
To adjust brightness level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from 0-100
Contrast
To adjust the contrast level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from 0-100
Sharpness
To adjust the sharpness level of the input signal
Use the Tbutton to select the function, then use W/X’button to adjust from 0-35
Saturation
To adjust the saturation level of the input signal
Use the Tbutton to select the function, then use W/X’button to adjust from 0-100
Hue
To adjust the Hue level of the input signal
Use the Tbutton to select the function, then use W/Xbutton to adjust from (–19)-0-(+19)
Rev. : 1.0 P.10
User Manua

l
Rev. : 1.0 P.11
11. LCD OSD Menu Operation
Geometry
Auto Conflg
To perform auto adjustment of the screen output.
Use the Tbutton to select the function, then use the W/Xbutton to select “ Auto Conflg”
H. Position
To adjust Horizontal Position of the screen output.
Use the Tbutton to select the function, then use the W/Xbutton to adjust “H. Position”
V. Position
To adjust Vertical Position of the screen output.
Use the Tbutton to select the function, then use the W/Xbutton to adjust “ V. Position”
Clock
To adjust the width of the image
Use the Tbutton to select the function, then use the W/Xbutton to adjust “Clock” .
Phase
To perform snow noise adjustment of the image.
Use the Tbutton to select the function, then use the W/Xbutton to adjust “ Phase”
User Manua

l
Rev. : 1.0 P.12
11. LCD OSD Menu Operation
Function
OSD Position
To perform OSD position selection of the screen
Use the Tbutton to select the function, then use the W/Xbutton to select the digit for
the OSD display region.
OSD Zoom
To perform OSD Zoom function of the OSD image
Use the Tbutton to select the function, then use the W/Xbutton to on/off the OSD
Zoom function
Color Temp.
To perform the Color Temperature selection of the image output
Use the Tbutton to select the function, then use the W/X' button to select “ Stan-
dard”, “Cool”, “Warm” and “User”
User Manua

l
Rev. : 1.0 P.13
11. LCD OSD Menu Operation
System
Language
To perform Language selection of the function display
Use the Tbutton to select the function, then use the W/Xbutton to select suitable
display language “ English”, “Chinese (中文)”, “Deutsch”, “Francais”, “Espanol”,
“Italiano” and “Japanese (日本語)”.
Time
To perform time setting of the system.
Use the Tbutton to select the function, then input the time setting and restore
Power OFF
To perform preset power off setting
Use the Tbutton to select the function, then input time setting and use W/Xbutton to
on/off the function.
Reset
To perform reset all stored parameters to factory preset mode
Use the Tbutton to select the function, then use W/Xbutton activate the function.
User Manua

l
12. Technical Specification
LCD
*All brand names, logo registered trademarks are properties of their respective owners.
*All information change without prior notice
Item Description
LCD Screen Manufac-
turer
LCD Origin South Korea
Panel 20” TFT
Resolution 1,600 x 1,200
Brightness 300 cd/m2
Color 1.67M
Contrast Ratio 800 : 1
Viewing Angle (H x V) 160° x 160°
Display Area 408 x 306
Pixel Pitch 0.255 mm
Response Time (Tr) 1ms
Response Time (Tf) 4ms
Back Light 2 Dual CCFTs (Cold Cathode Fluorescent Tube)
Horizontal Sync. 61.7 - 93.2 kHz
Vertical Sync. 50 - 75 Hz
Input Signal Analog RGB 0.7Vp-p
Power Management VESA DPMS
Brightness, Contract, Colour, Clock
H.Position, V.Position, Phase, Scaling
Auto Config., Input Select, Multi-Window
Clear EEPROM, OSD adjust
Power Input 12V DC Adapter
Video Input 15-pin D-sub Connector
OSD Control
User Manua
Rev. : 1.0 P.14