Synergy Global Technology ID-17A User manual





User Manual
ID-17AN / ID-H17AN
Aluminum front bezel
ID-17D / ID-H17D
ID-17P / ID-H17P
Universal Mounting Open Frame
Universal Mounting Open Frame
ID-17A / ID-H17A
17” LCD
Front NEMA4 / IP65

Legal Information
First English printing, July 2019
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.RackmountMart.com

Contents
< Part. 1 > ID-17A / ID-17AN / ID-H17A / ID-H17AN
1.1 Package Content P.1
1.2 Structure Diagram & Dimension P.2 - 3
1.3 Mounting Hardware & Installation P.4
< Part. 2 > ID-17D / ID-H17D
2.1 Package Content P.5
2.2 Structure Diagram & Dimension P.6 - 7
2.3 Mounting Hardware & Installation P.8
< Part. 3 > ID-17P / ID-H17P
3.1 Package Content P.9
3.2 Structure Diagram & Dimension P.10 - 11
3.3 Mounting Hardware & Installation P.12
< Part. 4 > Specifications / OSD
4.1 Product Specifications P.13 - 14
4.2 On-screen Display Operation ( OSD ) P.15
< Part. 5 > Options
5.1 Option Table P.16
5.2 3G / HD / SD-SDI Broadcast-grade input P.17
5.3 MC Multi-display control solution P.18
5.4 BNC Upgrade : DVI-D, S-Video + BNC & Audio
HDMI Upgrade : HDMI, S-Video + BNC & Audio P.19
5.5 Projected Capacitive ( 10-point touch )
Resistive / Capacitive ( 1-point touch ) P.20 - 21
5.6 DC Power : 12V / 24V / 48V / 125V P.22
5.7 MIL-type or lockable connector P.23
5.8 TV ( Analog ) P.24 - 25
5.9 Options for Sunlight Readable : Auto Dimming P.26
www.RackmountMart.com

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
3
4
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
www.RackmountMart.com

P. 1
Audio
Power
out - in - in
Video PC
VGA
HDMI
S-VideoBNC
HDMI upgrade I/O
Basic I/O
BNC upgrade I/O
< Part 1 > ID-17A / ID-17AN / ID-H17A / ID-H17AN
< 1.1 > Package Content
17" LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
Mounting hardware X 1 pack
- Mounting bracket x 4 pcs
- M4* 6mm screw x 8 pcs
- M4* 50mm screw x 8 pcs
Power VGADVI-D
Audio
Power
out - in - in
Video PC
VGADVI-DS-VideoBNC
www.RackmountMart.com

P. 2
Rear case
LCD panel
Protective 3mm glass
6mm aluminum front bazel
Audio speaker ( for HDMI, Audio or TV option )
LCD membrane
Remote sensor
1
2
3
4
5
6
7
7
1
2
3
4
6
< 1.2 > Structure Diagram
5
Model
Product Dimension
(W x D x H)
Net
Weight
ID-17A
ID-17AN
ID-H17A
ID-H17AN
439 x 64.2 x 356.6 mm
17.3 x 2.5 x 14 inch
6.6 kg
14.5 lb
Front view
Rear view
Side View
Bottom view
www.RackmountMart.com

P. 3
< 1.2 > Dimension
UNIT : mm
1mm = 0.03937 inch
Front View Side View
Rear View
Bottom View
www.RackmountMart.com

P. 4
■Hardware and M4*4 pcs for VESA mount are not provided
VESA mount ( 100*100mm )
M4 screw
< 1.3 > Installation
1
x 4 pcs
Mounting
bracket x 8 pcs
M4*6mm screw
2 3
x 8 pcs
M4*50mm screw
■Install 4 mounting brackets with 8 x M4*6mm screws
■Adjust the LCD panel with 8 x M4*50mm screws and fix it on the
surface.
Steps
( I) Panel mount
( II ) VESA mount ( 100*100mm )
www.RackmountMart.com

P. 5
< Part 2 > ID-17D / ID-H17D
< 2.1 > Package Content
Audio
Power
out - in - in
Video PC
VGA
HDMI
S-VideoBNC
HDMI upgrade I/O
Basic I/O
BNC upgrade I/O
17" LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
Power VGADVI-D
Audio
Power
out - in - in
Video PC
VGADVI-DS-VideoBNC
www.RackmountMart.com

P. 6
< 2.2 > Structure Diagram
1
2
3
4
5
Front view
Model
Product Dimension
(W x D x H)
Net
Weight
ID-17D
ID-H17D
408 x 59.5 x 325.6 mm
16.1 x 2.3 x 12.8 inch
5.8 kg
12.8 lb
Side View
Rear case
LCD panel
6mm aluminum front cover
Audio speaker, pair
LCD membrane
1
2
3
Rear view
5
4
Bottom
www.RackmountMart.com

P. 7
< 2.2 > Dimension
Front View Side View
Rear View
UNIT : mm
1mm = 0.03937 inch
Bottom View
www.RackmountMart.com

P. 8
■Hardware and M4*4 pcs for VESA mount are not provided
VESA mount ( 100*100mm )
M4 screw
< 2.3 > VESA mount Installation
www.RackmountMart.com

P. 9
Audio
Power
out - in - in
Video PC
VGA
HDMI
S-VideoBNC
HDMI upgrade I/O
Basic I/O
BNC upgrade I/O
Power VGADVI-D
Audio
Power
out - in - in
Video PC
VGADVI-DS-VideoBNC
< Part 3 > ID-17P / ID-H17P
< 3.1 > Package Content
17" LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
www.RackmountMart.com

P.10
Rear case
LCD panel
Audio speaker ( for HDMI, Audio or TV option )
Universal open frame mounting
LCD membrane
Extended remote sensor membrane cable
( 66cm from AD board to sensor end )
1
2
3
4
5
6
6
< 3.2 > Structure Diagram
1
2
5
4
3
Model
Product Dimension
(W x D x H)
Net
Weight
ID-17P
ID-H17P
436 x 58.2 x 353.6 mm
17.2 x 2.3 x 13.9 inch
4.9 kg
10.8 lb
Front view
Rear view
Side View
Bottom view
www.RackmountMart.com

P. 11
< 3.2 > Dimension
UNIT : mm
1mm = 0.03937 inch
Front View Side View
Rear View
Bottom View
www.RackmountMart.com

P.12
M4 screw
Hardware and M4*4 pcs for VESA mounting are not provided
< 3.3 > Installation
( I) Universal mount
( II ) VESA mount ( 100*100mm )
www.RackmountMart.com

P.13
< Part 4 >
< 4.1 > Product Specifications
Mechanical Design ID-17A /
ID-H17A
ID-17AN /
ID-H17AN
ID-17D /
ID-H17D
ID-17P /
ID-H17P
Protection 6mm front bezel NEMA 4 / IP65 front cover open frame
Front Panel Black, RAL 9005 -
Rear Casing Black, RAL 9005
VESA mount 100 x 100 mm
Universal mount - - ready
Desktop stand option option -
Panel mount bundled - -
LCD Panel Standard Sunlight Readable
Brightness ( cd/m2) 250 1000
Surface treatment Haze 25%, Hard-coating Anti-glare
MTBF ( hrs ) 30,000 50,000
Panel Size ( diagonal ) 17-inch TFT color LCD
Native resolution 1280 x 1024
Contrast Ratio ( typ. ) 1000 : 1
Colors 16.7 M
Viewing Angle ( L/R/U/D ) 85/85/80/80
Response Time ( ms ) 5
Dot pitch ( mm ) 0.264
Display Area ( mm ) 337.92H x 270.33V
Surface hardness 3H
Backlight Type LED
Video
VGA Analog 0.7Vp-p
DVI DVI-D single link
Option
HDMI HDMI 1.2 / HDCP 1.1
Composite ( BNC ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Audio Option
Input
Connector
Impedance / Power level
3.5mm stereo jack
30kΩ/ 750mV
Output
Connector
Resistance / Power level
3.5mm stereo jack
30kΩ/ 2.8V
Speaker:
Dual Stereo 2W x 2
*When the audio output is connected, speaker output is OFF
Power Standard Sunlight Readable
Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Consumption:
Screen ON Max. 25W Max. 35W
Power saving mode Max. 4W Max. 4W
Power button OFF Max. 1W Max. 1W
Compliance
EMC FCC & CE certified
Safety CE / LVD certified
Environment RoHS2 & REACH compliant
www.RackmountMart.com

P.14
Environmental Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage /
Non-operating
Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration ( 11ms duration )
Vibration 10~300Hz 0.5G RMS random vibration
Physical Specification
Product ( W x D x H )
mm 439 x 64.2 x 356.6 408 x 59.5 x 325.6 436 x 58.2 x 353.6
inch 17.3 x 2.5 x 14 16.1 x 2.3 x 12.8 17.2 x 2.3 x 13.9
Net Weight 6.6 kg / 14.5 lb 6.6 kg / 14.5 lb 5.8 kg / 12.8 lb 4.9 kg / 10.8 lb
Chassis color Dark
Chassis materials Aluminum
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
Applicable Format
DVID / VGA Input PC Signal 1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
Audio Signal 2ch Linear PCM
HDMI Input PC signal Same as VGA
HDMI 1.2 1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
* In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display
incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue.
< 4.1 > Product Specifications
www.RackmountMart.com
ID-17A /
ID-H17A
ID-17AN /
ID-H17AN
ID-17D /
ID-H17D
ID-17P /
ID-H17P

P.15
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
< 4.2 > On-screen Display Operation ( OSD )
www.RackmountMart.com