Synthes ComPact Air Drive II Configuration guide

ComPact Air Drive II.
Maintenance and cleaning instructions
for Synthes power equipment.
Care and
Maintenance Chart
ComPact Air Drive II
60.550.030 Graphic Case Base Assembly for CAD II
60.550.031 Lid for CAD II Graphic Case
60.550.032 Attachment Rack for CAD II Graphic Case
60.550.033 Insert Tray for CAD II Graphic Case
2500 ComPact Air Drive II Binder
511.701 ComPact Air Drive II
511.73 Jacobs Chuck with Key
511.75 Quick Coupling for drill bits
511.761 Large Quick Coupling
511.785 Reduction Drive Unit
511.791 Quick Coupling for Kirschner wires
519.40 Cleaning Brush
519.51S Double Air Hose—3 meters with
Schrader Stem
519.97 Autoclavable Oil
Also Available
690.577.06 Grommets for CAD II Attachment Rack
511.20 Oscillating Drill Attachment
511.30 Radiolucent Drive
511.731 Keyless Jacobs Chuck
511.782 Hudson Adaptor
511.783 Modified Trinkle Adaptor
511.784 Trinkle Adaptor
511.786 Reduction Drive Unit with Reverse
511.80 Oscillating Saw Attachment
511.801 Oscillating Saw Attachment II
511.902 Reciprocating Saw Attachment
511.904 Sternum Top for 511.902
Double Air Hoses, with Synthes stem
519.50 2 mm
519.51 3 mm
519.53 5 mm
Double Air Hoses, with Schrader stem
519.50S 2 mm
519.53S 5 mm
519.98 Spare Container with Autoclavable Oil
Set Contents
© 2000 Synthes, Inc. or its affiliates. All rights reserved. Synthes is a trademark of Synthes, Inc. or its affiliates. Printed in U.S.A. 12/12 J3387-G
www.synthes.com
Synthes USA
1302 Wrights Lane East
West Chester, PA 19380
Telephone: [phone]
To order: [phone]
Fax: [phone]
E-mail: [email protected]
Synthes (Canada) Ltd.
2566 Meadowpine Boulevard
Mississauga, Ontario L5N 6P9
Telephone: [phone]
To order: [phone]
Fax: [phone]

Synthes Air Powered Equipment
Cleaning
Before cleaning, remove all
instruments, attachments and
hose from the air drive unit.
Do not immerse in water.
Do not clean in automatic
washer or ultrasonic
cleaner.
Use a neutral pH cleaning
solution.
Clean and lubricate drive unit,
attachments and air hose
by hand immediately after
each use.
General Maintenance
Reverse trigger
(both triggers)
Variable speed
trigger
Attachment
release button
Air control valve
ComPact Air Drive II (511.701)
Air inlet
1
Manually clean air drive and
attachments under running
water. Use a mild cleaning
solution (neutral pH) and a
soft brush.
Do not allow water to
enter the air inlet of the
drive unit.
2
Clean cannulations of the air
drive and attachments with
the cleaning brush. Do not
insert cleaning brush into the
air inlet.
The Quick Coupling for
K-wires (511.791) must be
fully open to its maximum
diameter of 3.2 mm before
inserting the brush.
3
Retract and clean the quick
coupling hose end with a
soft brush and mild cleaning
solution.
Do not allow water to
enter the air inlets.
4
Clean hose with a mild
cleaning solution and a soft
brush or cloth.
Keep hose ends out of
water.
Dry all instrumentation
with a soft cloth.
Before cleaning, turn air control valve to the “off” position. Manipulate moving parts
under running water to loosen and remove debris. Open and close chucks, and move
quick couplings back and forth.
Lubricating
Lubricate the ComPact Air Drive II after every cleaning and before sterilization.
Use Synthes Autoclavable Oil (519.97).
Important: Never lubricate the radiolucent drive.
1
Before lubrication, open air
control valve. Apply approx-
imately five drops of oil into
the air intake of the drive
unit. Lubricate triggers.
2
Connect the air drive to an air
hose. Run the air drive for 20
seconds in both directions.
3
Lubricate all moving parts of
the attachments with one
or two drops of oil. Operate
the parts to distribute the oil.
Wipe off excess oil.
4
Lubricate the quick coupling
hose end with one or two
drops of oil.
Forward
(Lower trigger)
Reverse
(both triggers)

ComPact Air Drive II.
Maintenance and cleaning instructions
for Synthes power equipment.
Care and
Maintenance Chart
ComPact Air Drive II
60.550.030 Graphic Case Base Assembly for CAD II
60.550.031 Lid for CAD II Graphic Case
60.550.032 Attachment Rack for CAD II Graphic Case
60.550.033 Insert Tray for CAD II Graphic Case
2500 ComPact Air Drive II Binder
511.701 ComPact Air Drive II
511.73 Jacobs Chuck with Key
511.75 Quick Coupling for drill bits
511.761 Large Quick Coupling
511.785 Reduction Drive Unit
511.791 Quick Coupling for Kirschner wires
519.40 Cleaning Brush
519.51S Double Air Hose—3 meters with
Schrader Stem
519.97 Autoclavable Oil
Also Available
690.577.06 Grommets for CAD II Attachment Rack
511.20 Oscillating Drill Attachment
511.30 Radiolucent Drive
511.731 Keyless Jacobs Chuck
511.782 Hudson Adaptor
511.783 Modified Trinkle Adaptor
511.784 Trinkle Adaptor
511.786 Reduction Drive Unit with Reverse
511.80 Oscillating Saw Attachment
511.801 Oscillating Saw Attachment II
511.902 Reciprocating Saw Attachment
511.904 Sternum Top for 511.902
Double Air Hoses, with Synthes stem
519.50 2 mm
519.51 3 mm
519.53 5 mm
Double Air Hoses, with Schrader stem
519.50S 2 mm
519.53S 5 mm
519.98 Spare Container with Autoclavable Oil
Set Contents
© 2000 Synthes, Inc. or its affiliates. All rights reserved. Synthes is a trademark of Synthes, Inc. or its affiliates. Printed in U.S.A. 12/12 J3387-G
www.synthes.com
Synthes USA
1302 Wrights Lane East
West Chester, PA 19380
Telephone: [phone]
To order: [phone]
Fax: [phone]
E-mail: [email protected]
Synthes (Canada) Ltd.
2566 Meadowpine Boulevard
Mississauga, Ontario L5N 6P9
Telephone: [phone]
To order: [phone]
Fax: [phone]

ComPact Air Drive II.
Maintenance and cleaning instructions
for Synthes power equipment.
Care and
Maintenance Chart
ComPact Air Drive II
60.550.030 Graphic Case Base Assembly for CAD II
60.550.031 Lid for CAD II Graphic Case
60.550.032 Attachment Rack for CAD II Graphic Case
60.550.033 Insert Tray for CAD II Graphic Case
2500 ComPact Air Drive II Binder
511.701 ComPact Air Drive II
511.73 Jacobs Chuck with Key
511.75 Quick Coupling for drill bits
511.761 Large Quick Coupling
511.785 Reduction Drive Unit
511.791 Quick Coupling for Kirschner wires
519.40 Cleaning Brush
519.51S Double Air Hose—3 meters with
Schrader Stem
519.97 Autoclavable Oil
Also Available
690.577.06 Grommets for CAD II Attachment Rack
511.20 Oscillating Drill Attachment
511.30 Radiolucent Drive
511.731 Keyless Jacobs Chuck
511.782 Hudson Adaptor
511.783 Modified Trinkle Adaptor
511.784 Trinkle Adaptor
511.786 Reduction Drive Unit with Reverse
511.80 Oscillating Saw Attachment
511.801 Oscillating Saw Attachment II
511.902 Reciprocating Saw Attachment
511.904 Sternum Top for 511.902
Double Air Hoses, with Synthes stem
519.50 2 mm
519.51 3 mm
519.53 5 mm
Double Air Hoses, with Schrader stem
519.50S 2 mm
519.53S 5 mm
519.98 Spare Container with Autoclavable Oil
Set Contents
© 2000 Synthes, Inc. or its affiliates. All rights reserved. Synthes is a trademark of Synthes, Inc. or its affiliates. Printed in U.S.A. 12/12 J3387-G
www.synthes.com
Synthes USA
1302 Wrights Lane East
West Chester, PA 19380
Telephone: [phone]
To order: [phone]
Fax: [phone]
E-mail: [email protected]
Synthes (Canada) Ltd.
2566 Meadowpine Boulevard
Mississauga, Ontario L5N 6P9
Telephone: [phone]
To order: [phone]
Fax: [phone]