Sytech SY-XT13BTAPK User manual

Welcome
Thank you for purchasing the new Wireless portable speaker SY-XT13BTAPK . Please read this
manual carefully before operating your product and pay close attention to the precautions which
are mentioned below. Store this user manual in a safe place for future reference
Safety Precautions
Points to observe for safe usage
Read this manual carefully before using this item and its components. They contain
instructions on how to use this product in a safe and effective manner. SYTECH will not
be responsible for problems resulting from failure to observe the instructions in this
manual.
Turn off the device immediately in case of a problem.
Failure to do so may cause personal injury or damage to the product.
Return it to your authorized SYTECH dealer for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please
dampen the cloth with water only. Anything else has the chance of dissolving the paint
or damaging the plastic.
Temperature.
Be sure the temperature inside the room is between +35℃（+95℉）and -10℃
（+14℉）before turning your unit on.
Maintenance.
If you have problems, do not attempt to repair the unit yourself.
Placement.
Place the product on a flat surface.
Provide enough space around the product for sufficient ventilation.

Heat.
Do not locate the appliance in the vicinity of a heat surface or in direct sunlight.
Accessories.
Use only supplied accessories
Battery.
Avoid overcharging. The battery could overheat.
Replace battery.
The built-in rechargeable battery is not replaceable. Do not remove or replace the
battery, do not throw in the trash or in the fire. Contact Sytech Technical department for
a proper solution.
Charging the speaker
 Connect the provided power adapter to the wall outlet making sure the voltage matches the
local current supply. 100 V CA-240 V CA/9 V-1A
 The red light will switch on until the unit is fully charged.
 Charging time is approximately 6 to 8 hours.
 Once it is fully charged, the red light will turn to green. Unplug the power supply, as leaving
a full battery on charge may cause damage to the battery.
 Warning: If the battery is under voltage, please charge it completely within 48 hours.
 If the speaker has been left unused for a long time, please let the battery fully charge
before using it again, otherwise it will cause damage to the battery!
 During the process of playback, keep the unit away from high temperature environments,
high magnetic fields and high frequencies. If the system fails to work, turn off the power
source or pull out the USB disc/TF card, then reinsert it and resume playback.

Functions and connections
1: LED display
2: Volume knob
3: Power / Input button
4: Light mode selector
5: EQ mode
6: Microphone input
7: Line input
8: USB port
9: Charging indicator LED
10: External input DC 9V.
11: Next track
12: Play / Pause button – FM Scan
13: Previous track

Basic operation
 Press the “Power / Input” button for 2 seconds to turn on the speaker unit.
 Press the “Power / Input” button once to select the different modes. (Bluetooth, Line in, FM
Radio).
 To turn off the speaker, simply press the Power / Input button during 2 seconds.
 Before playing any track, make sure the volume is set to low and then slowly increase the
level up to your desire.
USB playback
 Make sure your USB stick is formatted as FAT32. If not, the speaker will not recognize the
memory device.
 Copy an MP3 or WMA format music file (download) to the root directory of your USB disc. It
is advisable to remove unnecessary files and the file catalog in order for the unit to read the
USB disc faster and reduce reading errors when playing songs.
 After inserting the USB stick, press the “Play / Pause” button to start the playback.
FM function
 Select the FM mode using the “Power / Input” button on the main control panel.
 Press the Play/Pause button for 2 seconds to start the auto scan process.
 The speaker will search all the best stations and will store them in the same search order.
 Once the auto scan process has finished, you can access to the stored station by pressing
Previous or Next button.
 A maximum of 40 presets can be stored
 Channels will be stored automatically in the order of the channels scanned. It is not possible
to store the channel manually.
Recording function
 It is possible to record directly into a USB pen drive. Simply insert a USB pen drive into the
USB port. Press the “Repeat” button during a few seconds and the display will show “rEC”.
the Speaker is now ready to record.
 Short press the Repeat button to stop recording.
 Long press the Play/Pause button to play the recorded files. Press the Next and previous
buttons to select the desired recorded file.

Mobile application (Control functions)
 The first step is to install the “Speaker Pro” application into your device. It can be installed on
any Smartphone or tablet. The app is totally compatible with IOS, Android, Windows.
 Download the Application “Speaker Pro” from Google store or I-Tune store and install it in
your device.
 Make sure the speaker is set to “Bluetooth” mode.
 Turn on the application and select the Bluetooth Icon. you may be asked to activate
the Bluetooth function in the case it is off. In this case, activate it before connecting the
application.
 Press on the “Find more devices” icon and when the speaker is found, press OK to confirm
the Bluetooth connection. Now your speaker is paired to your APP.
Important:
The Bluetooth connection to the application only allows the end user to control all the
functions and not the sound transmission. Therefore, there are two Bluetooth
connections. One of the is the Application and the other is the sound transmission.
Bluetooth connection (Sound transmission)
 The next step is to pair your device to the speaker via Bluetooth for the transmission of the
sound.
 Search on your device under Bluetooth mode the speaker SY-XT13BTAPK. Once found,
click on it to pair the device to the speaker for sound transmission.
 After the connection is successfully established, you can begin to play music. To ensure
continuous stability of the music signal, try to keep the BT device and the mobile phone
facing one another.
 The BT of the unit can be used up to 10 meters if there are no barriers.
Mobile Application
The advantage of the Portable speaker is that you can at any time use all its functions via
the application available in IOS and Android.
- Download from the App store “Speaker Pro”

- The following icon should appear on your device:
The application Speaker Pro includes the following functions:
- Music playback
- USB playback
- Line in Playback
- Change RGB color of the speaker
- Equalizer function (Not available for SY-XT13BTAPK)
- FM Radio function
Music Playback:
- Press the following icon to access to your music files.
- Select the desired track from your music library and play it.
- Option for repeating one track or complete folder is available.
- Option for shuffle playback is available.
USB Playback:
- Press the following icon to access to your files in your USB drive.
- Select the desired track and press Play to start playback.
- Option for repeating one track or complete folder is available.
- Option for shuffle playback is available.
Line In:
- Connect your desired external audio device to the Line in jack
- Press the following icon to access to the line in function
- Press Play on the external device.
- Select On or OFF from the Application in order to activate or disactivate the line in
function.
RGB Light:
- Press the following icon to access to the RGB light adjustments.

- Select the desired color light you wish to project on your speaker.
- Select “Profiles” to project default RGB settings.
FM Radio:
- Press the following icon to access to the FM radio option.
- Two options are available for searching the stations: Manual or Scan
- When Scan is pressed, the speaker will search all the available clear stations and will
store them in the same order of search.
- Manual tuning allows you to access to the desired FM frequency directly.
- To store the FM station, simply press and hold for 2 seconds any of the 16 squares
Main technical specifications
Basic Specifications
 High resistant material finishing
 FM tuner with 40 memory stations
 LED display indicating track number and
battery status
 LED lights integrated on the speaker
 Aux in feature (3.5mm)
 Microphone input, jack 6.5mm.
Bluetooth Specifications
 Chipset: AC6901A
 Bluetooth Version: V4.2 + EDR
 Bluetooth Support 4.2
 Bluetooth Profiles: A2DP, AVRCP
 Bluetooth Pairing name: SY-XT13BTAPK
USB Specifications
 2.0 USB Port (Max Capacity: 32GB)
 Compatible Audio Formats in USB: MP3/WAV
Technical Specifications
 Output power: 10W RMS
 SNR: ≥60dB
 Frequency response: 90Hz-15 kHz
 Consumption: 10W.
 Consumption in standby: <1W
 Power supply: 9 V CC-1A - 50/60Hz
 Battery: 7.4v 1500mAh
 Working Time: 2-3 hours
 Charging Time: 6-8 hours
 1 ways speakers: 6.5”
 Above specifications are the specifications of SY-XT13BTAPK and are for reference
purpose only.
 Due to continuous product development, specifications may be subject to change without
prior notification.
 Do not expose to adverse weather conditions (Such as rain or high temperatures) as it can
cause malfunctions

Troubleshooting
Fault Possible Cause Solution
No sound 1. No input sound source.
2. Volume is too low.
1. Use a better music signal.
2. Adjust the volume.
Distortion
of sound
1. Volume too high.
2. Speaker may be damaged.
1. Turn down the volume.
2. If speaker is damaged, contact the
technical department.
Karaoke
does not
work
1. Microphone plug is not fully
inserted.
2. Microphone switch is not on.
3. Microphone volume knob is at the
lowest position.
1. Plug microphone properly into the
socket.
2. Turn on microphone switch.
3. Adjust microphone volume
properly.
MP3 does
not play
1. The song format in the USB disc is
incorrect.
2. Improper operation has caused a
process disorder.
3. USB disc is disconnected.
1. Transform song format into Mp3
format.
2. Reboot the machine.
3. Insert the USB disc properly.

Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: [phone]
Fax: [phone]
NIF: B83254763
Manufacturing country: China
Description: Portable speaker
Sytech® SY-XT13BTAPK complies with the following directives:
RED Standard: Directive 2014/53/EU
ROHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator