
2. Insert the 18650 Lithium-Ion Battery negative end to Char-
ger’s Negative Lead first, carefully push into the Charging
Spring then, press the battery’s positive end down into
the Positive Lead. The negative end of the battery should
be secure against the Charging Spring. The LED Charging
Indicator will turn red to indicate the start of a charging
cycle.
(Make sure the battery is secure against both positive and neg-
ative leads. DO NOT to bend the Negative Lead Charging Spring, as this
will damage the charger and cause it to misread the charging status.)
3. When the LED Charging Indicator turns green, the battery
charging cycle is complete. Carefully remove the battery
and unplug the charger from the wall outlet.
WARNING! If the Wall Charger makes buzzing sounds and/or
becomes EXTREMELY HOT to the touch, immediately unplug
from outlet and contact us at support@tactxflashlights.com.
DO NOT continue use.
CAUTION! Always remove the battery and unplug the charger
from the wall outlet when charging cycle is complete to prevent
overheating and damage to the battery.
CAUTION!
Only use 18650 Li-Ion Batteries with this charger that
are in good condition. TactX Flashlights is not liable for property
damage or bodily harm resulting from the use of this charger.
DANGER! DO NOT use charger outdoors. DO NOT submerge
charger in water. DO NOT touch the positive and negative leads
of the charger with your hands or objects while plugged into a
wall outlet. DO NOT allow children to play with charger.
©2017 TactX Flashlights, LLC. For technical support, email us
at: support@tactxflashlights.com