tagarno Coaxial light User manual

1
VERSION: 1.3 | 2019-02-15
Digital Microscope Solutions
1
MANUAL | COAXIAL LIGHT
Power
supply
Coaxial
light
1. YOU HAVE RECEIVED
Basic control boxCoaxial light
2. ASSEMBLY AND CONNECTING
Power supply
Attach the coaxial light to the microscope Connect the coaxial light and the power
supply to the control box.
Connect the power supply to a power plug.
CONTENTS
1. YOU HAVE RECEIVED 1
2. ASSEMBLY AND CONNECTING 1
4. OPERATION 2

2
- +
2
3. OPERATION
EQUIPMENT DISPOSAL
This equipment is marked with the crossed out wheeled bin symbol to indicate that this equipment must
not be disposed of with unsorted waste.
Power saving/ECO mode
After 20 minutes of not using the intensity buttons, the intensity
is automatically reduced to 10% of the maximum.
A short press on the “+” or “-” button will reset the control box to
the original intensity.
Turn the control box and LED light on by
pressing the “+” or “-” button.
Control the light intensity by pressing the “+” or “-” button.
Turn the control box off by pressing the “+” and “-” buttons down
simultaneously for one second before letting go.
When turning the control box back on, it will automatically use the
last used setting.
Left Switch: ECO on/off
Right Switch: Sound on/off
The switches can be turned on/off using a harp object, eg. pen or
screwdriver.
Note! Before changing the ECO and Sound switches, do not forget
to unplug the control box.