Tamarack Industries Thawzall XHR700 User manual

Operators Manual
XHR700
Part #600280
Date : Sept 2019
CATERPILLAR/DEUTZ ENGINES

As a new customer of Thawzall we would like to welcome you! We are looking
forward to providing you with technical support for your Thawzall unit. Whatever you
need we are here to help.
Ways to contact us for support
By Phone : [phone]
The main Technical support phone line is staffed monday-friday 7:00 AM to 3:30
PM excluding holidays.
After hours support
Calls received outside of regular hours are directed to the On-call technician. Af-
ter hours support is reserved for issues that cannot wait until the next business day
for resolution. If no answer please leave a message and we will get back to you as
soon as possible.
By Email : [email protected]
Feel free to email us at any time with technical questions or parts inquiries.
Please include the year make and model of your unit if you have a specic ques-
tion about your machine so we can better help you. If it is an emergency please call
1-888-757-3545
For more information please visit our website
www.thawzall.com
1

For model:
XHR 700
Please record the following information from your new Thawzall
for future reference. This information is required for all warranty
claims.
Purchase date: ______/______/_______
Machine model:____XHR700____________________
Machine serial number:________________
*Vin number located on trailer tongue*
Manufactured by Thawzall, LLC
A DIVISION OF TAMARACK INDUSTRIES
2736 Latoka Lane Unit B
Alexandria, MN 56308
Phone [phone]
Fax: [phone]
Tech Support 888.757.3545
Website:www.Thawzall.com
E-Mail: [email protected]
2

WARNING
CALIFORNIA - Proposition 65 Warning
Engine exhaust and some of its constituents and some dust
created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to the
State of California to cause cancer, birth defects and other
reproductive harm.
Some examples of these chemicals are:-
Lead from lead-based paints
Crystalline silica from bricks
Cement and other masonry products
Arsenic and chromium from chemically
treated lumber
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals:
ALWAYS work in a well ventilated area, and work with
approved safety equipment, such as dust masks that are
specially designed to lter out microscopic particles.
3

INTRODUCTION
Congratulations on your choice of a Tamarack Industries Thawzall XHR700 to complement your construction
operation. This equipment has been designed and manufactured to meet the needs of the buyer for the efcient
heating of construction sites.
Safe, efcient and trouble free operation of your XHR700 requires that you and anyone else who will be operat-
ing or maintaining the Heater, read and understand the Safety, Operation, Maintenance and Trouble Shooting
information contained in the Operator's Manual.
This manual is applicable to the XHR700 built by Tamarack Industries. Use the Table of Contents as a guide
when searching for specic information.
Keep this manual handy for frequent reference and to pass on to new operators or owners.
4

Table of contents
Title Pages
Ways to contact Us 1
Unit Information 2
Proposition 65 warning 3
Introduction 4
Safety 6-11
Warranty 12-13
How it works 14
Controls 15
Operating Procedures 16
Main Screen Overview 17-22
Diagnostics Overview 23-26
Service screen overview 27
Troubleshooting 28-32
Maintenance 33-44
Specications 45
MSDS 46-49
Schematics 50-54
5

Accidents Disable and Kill
Accidents Cost
Accidents Can Be Avoided
Why is SAFETY important to you?
3 Big Reasons
ous situation that, if not avoided, will
result in death or serious injury. This
signal word is to be limited to the most
extreme situations, typically for ma-
chine components that, for functional
purposes, cannot be guarded.
Indicates a potentially hazardous situa-
tion that, if not avoided, could result in
death or serious injury, and includes
hazards that are exposed when guards
are removed. It may also be used to
alert against unsafe practices.
Indicates a potentially hazardous situa-
tion that, if not avoided, may result in
minor or moderate injury. It may also
be used to alert against unsafe prac-
tices.
SIGNAL WORDS:
Note the use of the signal words DANGER,
The Safety Alert symbol identies
important safety messages on the
Tamarack Heat King and in the
manual. When you see this symbol,
be alert to the possibility of personal
injury or death. Follow the instruc-
tions in the safety message.
This Safety Alert symbol means
ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
WARNING and CAUTION with the safety
messages. The appropriate signal word for
each message has been selected using the
following guide-lines:
SAFETY
SAFETY ALERT SYMBOL
DANGER - Indicates an imminently hazard-
WARNING -
CAUTION -
6

Safety, Installation & Operation
SAFETY
YOU are responsible for the SAFE operation and
maintenance of your Tamarack Industries Heat
King. YOU must ensure that you and anyone else
who is going to operate, maintain or work around
the Heat King be familiar with the operating and
maintenance procedures and related SAFETY
information contained in this manual. This manual
will take you step-by-step through your working
day and alerts you to all good safety practices that
should be adhered to while operating the Heater.
Remember, YOU are the key to safety. Good
safety practices not only protect you but also
the people around you. Make these practices a
working part of your safety program. Be certain
that EVERYONE operating this equipment is
familiar with the recommended operating and
maintenance procedures and follows all the safety
precautions. Most accidents can be prevented.
Do not risk injury or death by ignoring good safety
practices.
• Heater owners must give operating instruc-
tions to operators or employees before allow-
ing them to operate the machine, and at least
annually thereafter.
• The most important safety device on this
equipment is a SAFE operator. It is the opera-
tor’s responsibility to read and understand
ALL Safety and Operating instructions in the
manual and to follow these. Most accidents
can be avoided.
• A person who has not read and understood
all operating and safety instructions is not
qualied to operate the machine. An untrained
operator exposes himself and bystanders to
possible serious injury or death.
• Do not modify the equipment in any way.
Unauthorized modication may impair the
function and/or safety and could affect the life
of the equipment.
• Think SAFETY! Work SAFELY!
GENERAL SAFETY
Only trained competent persons shall operate
the Heater. An untrained operator is not qualied
to operate the machine.
Have a rst-aid kit available for
use, should the need arise and
know how to use it.
Do not allow riders.
Have a re extinguisher available for use
should the need arise and know how to
use it.
Wear appropriate protective gear. This
list includes, but is not
limited to:
- A hard hat
- Protective boots with
slip resistant soles
- Protective goggles
- Heavy gloves
- Hearing protection
Place all controls in their OFF position,
disconnect power cords and wait for all moving
parts to stop before servicing, adjusting or
maintaining
Wear appropriate hearing protection
when operating for long periods of
time.
Wear protective gloves
Ventilation ~ Never operate in a poorly
ventilated or enclose area. Avoid
prolonged breathing of exhaust
gases.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1. Read and understand the
Operator's manual and all
safety signs before
operating, maintaining,
adjusting, servicing or
cleaning the Heater.
7

ELECTRICAL SAFETY
1. Place all controls in their OFF position, discon-
nect power cords and wait for all moving parts to
stop before servicing, adjusting or maintaining.
2. Place all controls in their OFF position before
plugging in power cords.
3. Keep all electrical components in good repair
before starting.
4. Do not lay power lines or connectors in water
or on a wet surface. Dry connectors and raise
power lines out of the water before and during
operation.
5. Do not operate machine if there are electrical
malfunctions. Correct problem before resuming
work.
11. Hot surface ~ Avoid contact with
hot exhaust and glycol system.
Allow to cool before performing repairs
or service.
12. Electrocution Hazard ~ Always use proper size
grounded extension cord. Inspect all extension
cords for cuts, frayed wires and broken connectors.
Do not use cords if not in good condition.
13. Fire Hazard ~ Do not operate
machine in the vicinity of open
ames, sparks or while
smoking.
14. Explosion Hazard ~ Battery
Take care when handling battery
(if installed)
TIRE SAFETY
1. Failure to follow proper procedures when
mounting a tire on a wheel or rim can produce
an explosion which may result in serious injury
or death.
2. Do not attempt to mount a tire unless you have
the proper equipment and experience to do the
job.
3. Have a qualied tire dealer or repair service
perform required tire maintenance.
4. Torque wheel nuts to 120 ft-lbs
STORAGE SAFETY
1. Store unit in an area away from human
activity.
2. Do not permit children to play on or around the
stored Heater.
FUEL SAFETY
Danger: To avoid possible injury, re, or explo-
sion, please read and follow these instruc-
tions.
1. Handle fuel with care. It is highly ammable.
2. Allow burners to cool for 5 minutes before
refueling. Clean up spilled fuel before restarting
engine.
3. Do not refuel the machine while smoking or
when near open ame or sparks.
4. Always use an approved fuel container.
5. Fill fuel tank outdoors.
6. Prevent res by keeping machine clean of ac
cumulated trash, grease and debris.
7

MAINTENANCE SAFETY
1. Review the Operator's Manual and all safety
items before working with, maintaining or
operating the Heater.
2. Place all controls in their OFF position, dis-
connect power cords and wait for all moving
parts to stop before servicing, adjusting or
maintaining.
3. Follow good shop practices:
4. Keep hands, feet, clothing and hair away from
all moving and/or rotating parts.
5. Always wear heavy gloves to prevent burns
when handling hot components. Wait until burn-
ers, coils and glycol system components have
cooled before working on them.
6. Do not attempt any adjustment or maintenance
to any system of the Heater unless the power
wires are disconnected from the battery.
7. Make sure that all guards, shields and hoods
are properly installed and secured before oper-
ating the Heater.
8. Securely support the machine using blocks
or safety stands before working beneath it or
changing tires.
9. Store and transfer diesel fuel, solvents, cleaners
or any ammable liquids only in safety standard
approved containers.
- Keep service
area clean and dry.
- Be sure electri-
cal outlets and tools
are properly ground-
ed.
- Use adequate
light for the job at
hand.
OPERATING SAFETY
1. Read and understand the Operator’s Manual
and all safety signs before operating, servic-
ing, maintaining or adjusting the Heater.
2. Place all controls in their OFF position,
disconnect power cords and wait for all
moving parts to stop before servicing,
adjusting or maintaining.
3. Do not allow riders in or on machine during
transport.
4. Clear the area of bystanders, especially small
children, before starting and operating.
5. Keep the working area clean and free of de-
bris to prevent slipping or tripping. Clean up
fuel spills immediately if they occur.
6. Slow down. Use care when working around
unit - the steps, frame or oor may be wet
and/or slippery.
7. Do not allow personnel that are taking drugs,
alcohol or any medications that impair the
senses or when excessively tired or stressed
to operate the Heater.
8. Do not operate unit in a poorly ventilated or
enclosed area to prevent asphyxiation when
the heaters are operating.
9. Do not smoke when connecting fuel source or
when working around machine.
10. Always wear heavy gloves when working on
the machine to prevent burns when touching
hot components.
11. Use the foot pedal switch to engage the hose
reel take up or extend function and guide the
hose by hand.
12. Keep all electrical lines and components in
good working order. Do not operate in wet
conditions or when standing in water. Damp
or wet conditions can cause shocks or trip the
breakers.
13. Keep all components in good condition.
14.Do Not plug or block access doors or vents.
Keep 1 foot of clearance around unit.
15. Review safety instructions with operators
annually.
9

SAFE TRANSPORTATION AND STORAGE
When transporting the machine, review and follow
these instructions:
1. Be sure all bystanders are clear of the machine.
2. Back the truck up to the hitch and lower hitch
over the ball.
3. Secure with a mechanical retainer.
1. Attach to towing vehicle and secure with a me-
chanical retainer. Cross the safety chains under
the hitch and anchor to truck frame.
2. Connect the brake anchor cable to the truck
frame to activate the trailer brakes if the trailer
unexpectedly unhooks. Provide sufcient slack
for turning.
3. Check that all lights and reectors required by
the DOT are clean and functioning.
4. Do not exceed 55 mph under ideal conditions.
5. Do not allow riders on machine.
6. Do not drink and drive.
TRANSPORTING SAFETY
TRAILER TOWING CAN
BE HAZARDOUS
WARNING
* DO NOT exceed 55 mph under ideal
conditions
* Reduce speed under adverse
weather, road or terrain conditions
* Avoid sudden lane changes, U-turns
etc.
* Sudden maneuvers may cause
tipping, rollover, jackkning or sliding
of the trailer and without warning loss
of control of the towing vehicle may
result.
* Allow for increased braking distance
due to weight of trailer
* Read the Operator's Manual before
towing.
4. Cross the safety chains under the hitch and at-
tach to truck frame.
5. Attach the brake line to the truck frame. Be sure
to leave sufcient slack for turning.
6. Connect electrical harness to truck plug-in.
7. Raise and secure the hitch jack.
8. Reverse the Heat King set-up procedure t
9. Check and be sure that all lights are working.
10. Do not allow riders on machine.
11. Never exceed a safe travel speed.
12. Do not drink and drive.
13. Check with local highway authorities on the
specic requirements for transporting fuel oil
through their jurisdiction. Always comply with the
requirements before transporting.
10

SIGN-OFF FORM
Tamarack Industries follows the general Safety Standards specied by the Society of Automotive Engi-
neers (SAE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operat-
ing and/or maintaining the Heat King must read and clearly understand ALL Safety, Operating and Mainte-
nance information presented in this manual.
Do not operate or allow anyone else to operate this equipment until such information has been reviewed.
Annually review this information before the season start-up.
Make these periodic reviews of SAFETY and OPERATION a standard practice for all of your equipment.
We feel that an untrained operator is unqualied to operate this machine.
A sign-off sheet is provided for your record keeping to show that all personnel who will be working with the
equipment have read and understand the information in the Operator’s Manual and have been instructed
in the operation of the equipment.
DATE EMPLOYEES SIGNATURE EMPLOYERS SIGNATURE
SIGN-OFF FORM
11

Date Dealer’s Rep. Signature
The above equipment and Operator’s Manual have been received by me and I have been thoroughly
instructed as to care, adjustments, safe operation and applicable warranty policy.
Date Owner's Signature
TAMARACK INDUSTRIES
THAWZALL
WARRANTY REGISTRATION FORM & INSPECTION REPORT
DISTRIBUTOR INSPECTION REPORT
SAFETY
Emergency Stop Switch Works
All Decals Installed and Legible
Lights and Reectors Installed,
Clean and Working
Review Operating And
Safety Instructions
WARRANTY REGISTRATION (please print)
This form must be lled out by the dealer and signed by both the dealer and the customer at the time of deliv-
ery.
Customer’s Name Distributor Name
Address Address
City, State, Code City, State, Code
Phone Number ( ) Check One:
Contact Name Private
THAWZALL Model Contractor
Serial Number Other
Delivery Date
I have thoroughly instructed the buyer on the above described equipment which review included the Op-
erator’s Manual content, equipment care, adjustments, safe operation and applicable warranty policy.
Tire Pressure Checked
Wheel Bolts Torqued
Brakes Work
Check Fluid Levels (Fuel and Glycol)
Lubricate Machine
Check That All Controls Function
12

Tamarack Industries CONDITIONS OF SALES & LIMITED WARRANTY
All sales made by Tamarack Industries, here after ref-
ered to as Tamarack, a Division of ELJO Industries Inc.
are subject to these conditions unless otherwise agreed
in writing with a duly authorized ofcer of Tamarack. In
all cases of conict between these conditions and the
requirements of the purchase order, these conditions
shall prevail.
(1) SALES POLICY: Nothing herein shall be construed
as abridging the right of Tamarack to sell directly or indi-
rectly to: (a) Federal, State or Provincial Governments
or Agencies thereof, or to Agencies employing Federal,
State or Provincial Government aid; (b) Purchasers
who buy Tamarack's products for sale as integral or as-
sembled parts of their products; (c) Firms operating on a
national scale; (d) Any other class of purchaser to whom
Tamarack may from time to time, elect to sell.
(2) PRICES: All prices are F.O.B. our warehouses,
freight allowance as specied on Distributor Net Price
Lists. The suggested list prices and discounts schedules
are established by Tamarack and are intended to act as
a guide for our distributors. Unless otherwise stated in
writing, prices are subject to change without notice and
will be applied as in effect at time of shipment.
(3) TERMS: Unless otherwise agreed upon in writing by
an ofcer of Tamarack, all invoices become due and pay-
able net 30 days following the date in invoice. Interest
at the maximum legal rate will be charged on all overdue
accounts. Minimum net charge per invoice is $75.00
(4) CANCELLATION AND CHANGES: No orders or
sales may be cancelled or changed without the consent
of Tamarack. At Tamarack's option cancelled/changed
orders are subject to payment of cancellation charges
equal to all costs incurred by Tamarack up to the date
of cancellation/change.
(5) DELAYED DELIVERIES: Tamarack shall not be
liable for any delay of merchandise for any cause what-
soever.
(6) CLAIMS: All goods shall be deemed delivered to pur-
chaser at the time they are placed in the hands of carrier
and consigned to purchaser: loss, damage or destruc-
tion of any said merchandise is assumed by purchaser.
No claims may be made for shortages unless made in
writing within ten days from receipt of merchandise.
(7) RETURN OF GOODS: Written permission from
Tamarack must be obtained before returning any mer-
chandise. All transportation charges must be borne by
the purchaser. Credit for returned goods will be based
on the original price paid, less 20%. Special parts or
custom-built items cannot be returned for credit.
(8) LIMITATION OF LIABILITY: Tamarack's liability on
any claim of any kind, including negligence, for any loss
or damage arising out of, connected with, or resulting
from contract, or the performance or breach thereof, or
the design, manufacture, sale, delivery, resale, installa-
tion, technical direction of installation, inspection, repair,
operation or use of any equipment covered by or fur-
nished under contract shall in no case exceed the price
paid by the purchaser for the equipment. Tamarack also
disclaims all purchaser for the equipment. Tamarack
also disclaims all liability, whether in contract, tort, war-
ranty, or otherwise, to any party other than purchaser.
(9) All Price Lists, Catalogues and other material shall re-
main the property of Tamarack and are subject to return
on demand. The Suggested List Prices are established
by Tamarack and are intended to act as a guide. All
shipping weights shown are approximate.
LIMITED TAMARACK WARRANTY
For one year from date of purchase, Tamarack will re-
place or repair for the original purchaser, free of charge,
any part or parts, found upon examination by any
Tamarack Authorized Service Depot or by the Tamarack
factory, to be defective in material or workmanship or
both. Equipment and accessories not manufactured
by Tamarack are warranted only to the extent of the
original manufacturer's warranty. All transportation
charges on parts submitted for replacement or repair
under this warranty must be borne by the purchaser.
For warranty service contact your nearest Tamarack
Authorized Service Depot.
THERE IS NO OTHER EXPRESS WARRANTY,
IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICU-
LAR PURPOSE ARE LIMITED TO ONE YEAR FROM
PURCHASE AND TO THE EXTENT PERMITTED BY
LAW. LIABILITY FOR CONSEQUENTIAL DAMAGES
UNDER ANY AND ALL WARRANTIES ARE EXCLUD-
ED TO THE EXTENT EXCLUSION IS PERMITTED BY
LAW. (THIS WARRANTY IS AN ADDITION TO ANY
STATUTORY WARRANTY.)
P.O. Box 234, Station "L"
Winnipeg, Manitoba
Canada R3H 0Z5
WARRANTY VOID IF NOT REGISTERED
13

On board Diesel
Fuel Tank
ENGINE
Generator
TO OUTSIDE
RADIATOR
POSITIVE AIR SHUTOFF FAN HEATER COILS
CLEAN
HOT AIR
XHR700 : FLAMELESS HEATER
SLIDE GATE
ENGINE EXHAUST
MUFFLER
HEAT EXCHANGER
AIR FLOW SENSOR AIR TEMP SENSOR
How It Works
Flameless Heater:
This equipment was designed for space heating of buildings under construction, as an outdoor
application with engine exhaust gases discharged outdoors. This unit is a self-contained and does
not require an external power supply.
The XHR700 has a diesel engine and AC alternator which is used to provide power to the on
board heater bank and blower motor. External air is drawn into the enclosure, this air is then
heated by the residual heat from the internal components. The air is further heated by being
drawn through the coolant radiator and through a heat exchanger utilizing hot exhaust gases.
This heated air is nally blown across a heater bank to increase the air to the desired temperature
setting. This ameless application is well suited for use in hazardous areas where amed heaters
cannot be used. The unit is automated by an onboard computer sytem with user settable tempera-
ture and air speed.
14

15
Controls
8 | Page
PART NUMBER: 600307 –PROGRAMMED HMI
1. TACTILE KEY’S
1.1. Used for screen navigation & button activation
2. TOUCHSCREEN
2.1. Displays machine graphics & parameters
2.2. Touch activation as described in Screen Operation Section
3. HMI INDICATORS
3.1. Power Indication & Mode Status
3.2. USB Connected
3.3. Network Connected
3.4. CPU Processing
4. DIAL ENCODER
4.1. Parameter Adjustment
5. HOME KEY
5.1. Returns To Previous Screen
6. ESCAPE KEY
6.1. Returns To Previous Screen
7. USB PORT
7.1. Software Update & Factory Use

16
9 | Page
OPERATIONS
STARTUP
PRE-MACHINE STARTUP
(PRE-STARTUP INSPECTION PERFORMED)
PRE-ALARM & ENGINE START SEQUENCE
1. At the Main Screen or Engine Screen press
2. Provided ECU “Wait to Start” lamp is OFF, HMI buzzer will begin to beep for 5sec
indicating the Engine is about to start
3. HMI will begin to crank the engine until Cutout RPM reached or 10sec elapses
ENGINE WARM UP SEQUENCE
1. Engine Idles at Idle RPM until High Idle Engine Temp is reached
2. HMI will command engine to High Idle
HEAT CONTROL OPERATION
1. HMI turns on Blower after Blower 1 Delay setting
2. HMI Turns on Heater 1 after Heater 1 Delay setting
3. HMI begins Heat Control by cycling heaters 2 thru 4 to achieve desired Heat Setting
selected on Main Screen.
3.1. LOW Setpoint Factory Default: 120DegF
3.2. MED Setpoint Factory Default: 182DegF
3.3. HIGH Setpoint Factory Default: 222DegF
NOTE: The Heat Control also monitors the Engine Load Percentage which may cause the
controller to lower the Heater load for an interval of time. This is to optimize the
performance of the equipment while protecting the wear of the engine.
ENGINE SHUTDOWN SEQUENCE
1. At the Main Screen or Engine Screen press
2. HMI will turn off Heat Control leaving on the Blower Motor ON. ‘SHUTDOWN CYCLE’ is
displayed in message center.
3. HMI will continue run the Blower Motor until LOW IDLE ENGINE TEMP is reached OR 3min
elapses
4. After 5sec HMI will command Engine Idle RPM
5. After 1min HMI will shut off Engine
6. HMI Message Center will display “Machine Ok”

17
10 | Page
SOFTWARE
MAIN SCREEN - OVERVIEW
1. DISPLAY
1.1. Engine Battery Voltage is display here. Data is transmitted over J1939
network from Engine.
1.1.1. NOTE: No Engine data is transmitted when the Ignition is OFF.
1.2. Machine status is displayed here including Faults, Warnings,
and Engine Codes.
1.3. Fuel Level is displayed here. Data is transmitter over J1939 from SKIM.
1.4. Engine Hours is displayed here. Data is transmitted over J1939
network from Engine.
1.5.Engine Oil Level is displayed with the following icon. Data is transmitted over
J1939 network from SKIM.
- Inactive
- Active

18
11 | Page
1.6.Engine Wait is displayed with the following icon. Data is transmitted over J1939
network from Engine. Refer to engine manufacturer for further information.
- Inactive
- Active
1.7.Engine Stop is displayed with the following icon. Data is transmitted over J1939
network from Engine. Refer to engine manufacturer for further information.
- Inactive
- Active
1.8.Engine Fault is displayed with the following icon. Data is transmitted over J1939
network from Engine. Refer to engine manufacturer for further information.
- Inactive
- Active
1.9.DPF Active is displayed with the following icon. Data is transmitted over J1939
network from Engine. Refer to engine manufacturer for further information.
- Inactive
- Active
1.10.High Exhaust Temp is displayed with the following icon. Data is transmitted
over J1939 network from Engine. Refer to engine manufacturer for further
information.
- Inactive
- Active
1.11.DPF Disabled is displayed with the following icon. Data is transmitted over
J1939 network from Engine. Refer to engine manufacturer for further
information.
- Inactive
- Active
1.12. Gate Actuator position is displayed here when engine is running at High
Idle.
1.12.1. NOTE: Only displayed when Actuator is Active in OEM Settings.

19
12 | Page
1.13. Duct Temperature is displayed here in Fahrenheit.
2. NAVIGATION
2.1. Press adjacent tactile button or touch screen icon to navigate to SETUP
SCREEN.
2.1.1. NOTE: This feature disappears when equipment is running.
2.2. Press adjacent tactile button or touch screen icon to navigate to
MAINTENANCE SCREEN.
2.2.1. NOTE: This feature disappears when equipment is running.
2.3. Press adjacent tactile button or touch screen icon to navigate to
INFORMATION SCREEN.
2.4. Press adjacent tactile button or touch screen icon to navigate to ENGINE
SCREEN.
3. FUNCTIONS
3.1. System Start is activated here. This initiates the start sequence of the
machine.
3.2. System Stop is activated here. This commands the shutdown sequence of
the machine.
3.3. Gate Open is activated here. Function illuminates when active.
3.3.1. NOTE: Only displayed when Actuator is Active in OEM Settings
3.4. Gate Close is activated here. Function illuminates when active.
3.4.1. NOTE: Only displayed when Actuator is Active in OEM Settings
3.5. Heat Setting is selected by touching the center of the circle in the Heat Setting.
- LOW Setting - MEDIUM Setting - HIGH Setting