T&d Tr75a User manual

Safety Precautions and Instructions

The following items should be strictly obeyed for the safe

usage of this product, and for protecting yourself and other

people from bodily harm and/or damage to property.

Explanation of Symbols

DANGER

These entries are actions that absolutely under no

circumstance should be taken. The taking of such an

action may cause serious personal physical damage or

death.

CAUTION These entries are actions that if taken may lead to

physical injury or damage to persons or things.

Denotes an

important warning

or caution.

Denotes a

forbidden action.

Denotes an action

that should not be

carried out.

DANGER To Prevent Serious Accidents

Do not disassemble, repair or modify the unit and/or accesso-

ries.

Do not use the unit in any environment that is exposed to chem-

icals and harmful gases. Doing so may cause corrosion and/or

other danger to the unit. Also, coming in contact with hazardous

substances may cause bodily harm to the user or people nearby.

This product is not water resistant. If water or a foreign object

enters the case, immediately remove batteries and stop using it.

Do not touch the unit or AC adaptor during thunder and light-

ning, as this may cause electrocution.

Do not handle the unit, remove batteries or cables with wet

hands.

This product has been designed for private and/or industrial use

only. It should not be used in situations where strict safety precau-

tions are necessary such as with medical equipment, or in systems

directly or indirectly connected with human life or well-being.

Do not drop or expose the unit to a strong impact.

Do not cut or process the cords for the communication cables.

Also, do not twist, pull on or swing any of the cords.

To prevent damage to the unit from static electricity, remove static

electricity from your body by touching metal around you (such as

a door knob and window frame) before touching the unit.

Place and store the unit and accessories out of the reach of

children.

We are not responsible for any damage, malfunction or trouble,

whether direct or indirect, caused by the use of our product.

Do not use any battery, sensor, or cable other than those speci-

ed by T&D Corporation.

Do not put anything on top of the cable or the unit. This may

cause overheating.

Do not disconnect the USB cable during USB communication.

Doing so may cause adverse eects to the unit and/or PC.

Make sure that sensor and cable plugs are all inserted fully, so

as not to cause an improper connection. Also, when unplugging

the cable from the unit, do not pull the cord, but hold the con-

nector to disconnect.

If the unit produces heat, emits smoke or a strange smell, or

makes unusual noise, immediately remove the batteries and

stop using it. Also, unplug the unit from the PC.

If the unit is not to be used for a long period of time, remove

batteries. Leaving batteries inside the unit may cause battery

leakage and malfunction. Install new batteries when starting or

re-starting to use a unit.

For TR75A: Ch.1 and Ch.2 terminals are NOT electrically isolated

from each other. Do not attach non-isolated thermocouple

sensors to objects connected to a live voltage. This may cause a

short circuit or an electrical shock.

CAUTION

Do not place or store in the following areas:

» Areas exposed to direct sunlight

» Areas subject to direct ames or heaters, as well as areas in which

hot air accumulates and creates extremely high temperatures

» Areas exposed to static electricity

» Areas exposed to strong magnetic elds

» Areas exposed to water leakage

» Areas subject to condensation or wet areas

» Areas exposed to excessive vibration

» Areas exposed to excessive smoke, dust or dirt.

CAUTION Precautions for Battery

» There is a risk of re or explosion if battery is replaced by an incor-

rect type. Use and replace only with correct size and type (AA alka-

line) of battery.

» Do not disassemble, modify, mechanically crush or cut the battery,

it may cause battery leakage, overheating, explosion or re.

» Do not dispose of a battery into re or a hot oven as this can result

in an explosion.

» Do not leave a battery in an extremely high temperature surround-

ing environment or subjected to extremely low air pressure that can

result in an explosion or the leakage of ammable liquid or gas.

CAUTION Other Precautions

» Use the unit in the specied operating environment. Do not use it

for any purpose other than for which it was designed.

» Condensation may occur inside the case when a unit is moved from

one environment to another where there is a great dierence in

temperature.

» Do not use the unit in wet areas or places exposed to water such as

bathroom.

» When connecting the unit to your PC, make sure to follow all warn-

ings and directions from your computer manufacturer.

» We shall not guarantee the unit's operation if it has been connected

to a PC using a USB hub or a USB extension cable.

» Do not insert any foreign objects into any of the units' jacks.

» If the unit gets dirty, wipe it with a clean cloth.

» Make sure to remove dust and dirt from plugs of any cables.

» Battery terminals may provide insucient contact due to age or

vibration. This may lead to data loss.

»Please note that this document has been written based on the pre-

supposition that details about contracts with an Internet provider,

specic network environments and the set-up of any other neces-

sary equipment to enable network connection has already been

taken care of by the User and that connection has been conrmed as

workable. T&D Corporation shall not be responsible for any damages

which a contractor, a user or a third party may suer, whether direct

or indirect, due to the inability to communicate or use communica-

tion devices.

» Please be careful not to let a third party know of your registration

code. The registration code cannot be reissued or changed.

CAUTION Notices about Sensors

» Do not connect any sensor to the unit other than those specied by

T&D Corporation.

» Make sure to use sensors within the measurement range indicated

in the specications for that sensor.

» Do not connect the sensor to any data logger other than those speci-

ed by T&D Corporation.

» Do not expose the sensor to a strong impact. This may adversely

aect measurement accuracy and cause damage or malfunction.

» When the sensor is not to be used for a long period of time, please

store it at normal temperature and humidity.

» The included sensor is not water resistant. If the sensor gets wet, im-

mediately remove the sensor from the unit and wipe it with a clean

cloth as soon as possible. Then allow the sensor to dry in normal

room temperature before using it again.

» Do not use the sensor on the human body.

Temperature-Humidity Sensor

» If extremely severe temperature changes occur, it may result in large

errors in humidity measurement. Once the sensor's temperature

becomes stable, the measurements will return to normal.

» The temperature-humidity sensors will with normal use experience

losses in precision and sensitivity over time due to degradation. If

the sensor is being used in an unsuitable environment (smoky or

dusty places) it may be necessary to change the sensor sooner.

» When using the sensor in an environment where the humidity is

under

30 %RH, the measurements may sometimes uctuate. This is

not abnormal.

» Do not expose to condensation, dampness, corrosive gases, or

organic solvents.

Thermocouple Sensors

» We do not handle the sale of Thermocouple sensors. Please prepare

a commercially available sensor.

Package Contents

TR71A Temperature 2ch

Data Logger Temperature Sensor

TR-0106 x 2

AA Alkaline Battery

(LR6) x 2

USB Mini-B Cable

(US-15C)

Manual Set

(Warranty Included)

Registration

Code Label

TR72A Temperature 1ch, Humidity 1ch

Data Logger

Temperature-Humidity

Sensor THA-3001

AA Alkaline Battery

(LR6) x 2

USB Mini-B Cable

(US-15C)

Manual Set

(Warranty Included)

Registration

Code Label

TR72A-S Temperature 1ch, Humidity 1ch

(High-Precision Type)

Data Logger High Precision

Temperature-Humidity

Sensor SHA-3151

AA Alkaline Battery

(LR6) x 2

USB Mini-B Cable

(US-15C)

Manual Set

(Warranty Included)

Registration

Code Label

TR75A Thermocouple (K, J, T, E, S, R) Temperature 2ch

Data Logger AA Alkaline Battery

(LR6) x 2

USB Mini-B Cable

(US-15C)

Manual Set

(Warranty Included)

Registration Code

Label

Getting Logger Ready for Installation

Battery Installation & Sensor Connection

Battery

Make sure to use new batteries

(including for replacement) and

insert in the correct direction.

TR71A TR72A / TR72A-S

About TR71A Internal Sensor

Channel 1 has an internal temperature sensor. When an external sensor is not connected, the

internal sensor will be used.

About TR75A Input Terminal

When connecting thermocouple wires to the input terminal, make sure that the positive and

negative connections are in the proper order. If the polarity is incorrect, changes in temperature

will be reversed (when the real temperature increases, the measured temperature will decrease).

Wiring Connections

Connect and disconnect the thermocouple wire from the hole

while pressing the input terminal button with a screwdriver or

other such tool.

Do not try to pull out the wire without pressing the button.

Compatible Wires

Single wire: 0.32 to 0.65 (AWG 28-22)

Twisted wire: 0.08 to 0.32 (AWG 28-22)

Diameter: 0.12 or more

Strip length: 9 to 10

Strip

Button

Using GND

If measurements are unstable while using external power (USB or PoE), connect to the GND

terminal.

»See the User's Manual for how to set and check thermocouple sensor type for TR75A.

TR71A

TR72A

TR72A-S

TR75A

Operation Buttons Battery Cover USB Port

Sensor Jack

Channel 1

Sensor Jack

Channel 2

(TR71A only)

Power Button

Thermocouple

Input Terminal

Part Names

The Introductory Manual also explains operations using the operation buttons.

Thermo Recorder TR7 Series TR71A/TR72A/TR72A-S/TR75A

Please Read First

TR71A / TR72A / TR72A-S / TR75A - Specications

TR71A TR72A TR72A-S TR75A

Measurement Channels Temperature 2ch Temperature 1ch Humidity 1ch Temperature 1ch Humidity 1ch Temperature 2ch

Sensor Thermistor Thermistor Polymer Resistance Thermistor Polymer Resistance Thermocouple: Type K, J, T, E, S, R (*1)

Measurement Units °C,°F °C, °F %RH °C, °F %RH °C, °F

Measurement

Range

Internal

Sensor

10 to 60°C (*2) - - - - -

External

Sensor

40 to 110°C (Supplied Sensor)

60 to 155°C (Optional Sensor:

Fluoropolymer Coated Type)

0 to 55°C 10 to 95 %RH

25 to 70°C 0 to 99 %RH (*3)

Type K:

199 to 1370 °C

Type J:

199 to 1200 °C

Type T:

199 to 400 °C

Type E:

199 to 1000 °C

Type S:

50 to 1760 °C

Type R:

50 to 1760 °C

Accuracy

(Supplied Sensor)

Avg. ±0.3°C at -20 to 80°C

Avg. ±0.5°C at -40 to -20°C, 80 to 110°C

±0.5°C ±5 %RH

at 25°C, 50 %RH

±0.3°C at 10 to 40°C

±0.5°C

at all other temperatures

±2.5 %RH

at 15 to 35°C, 30 to 80 %RH

Thermocouple Measurement

(Sensor inaccuracies not included)

Type K, J, T, E: ±(0.5 °C + 0.3 % of reading)

100°C or above

Type S, R: ±(1.5 °C + 0.3 % of reading)

at 100°C or above

Cold Junction Compensation

±0.5℃

at 10 to 40 °C

±0.8℃

other temperatures within the operating

environment of the logger

Measurement

Resolution 0.1°C 0.1°C 1 %RH 0.1°C 0.1 %RH Type K, J, T, E: 0.1 °C

Type S, R: Approx. 0.2 °C

Responsiveness (Supplied Sensor)

Response Time (90%): Approx. 190 sec.

Response Time (90%): Approx. 7 min. Response Time (90%): Approx. 7 min. -

Logging Capacity 30,000 data sets (One data set consists of readings for all channels.)

Recording Interval Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20, 30, 60 min.

Recording Mode Endless (Overwrite oldest data when capacity is full) / One Time (Stop recording when capacity is full)

Auto-upload Interval Select from 15 choices: OFF (No auto-upload), 1, 2, 5, 10, 15, 20, 30 min. or 1, 2, 3, 4, 6, 12, 24 hrs.

Communication

Interfaces

Wireless LAN Communication

IEEE 802.11b/g/n (2.4GHz only)

Security: WPA/WPA2-PSK (AES/TKIP)

WPS 2.0 : Push Button Conguration

Protocol (*4): HTTP, HTTPS, DHCP, DNS

Bluetooth Communication

Bluetooth 4.2 (Bluetooth low energy)

USB Communication

USB 2.0 (Mini-B connector)

Power (*5) Battery: AA Alkaline LR6 x 2, AA Ni-MH x 2

External: USB Bus 5V 200mA, AC Adaptor AD

05A2 or AD

05C2

Battery Life (*6) Approx. 10 days to 15 months (*7) (*8)

Dimensions H 58 mm x W 78 mm x D 26 mm

Weight Approx. 55 g

Operating Environment Temperature:

10 to 60°C, Humidity: 90 %RH or less (no condensation)

Software

PC Software (Windows) (*9)

TR7 for Windows, T&D Graph, T&D Data Server

Mobile Application (iOS, Android)

T&D Thermo

(For compatible OS versions, please refer to the Software page of our website at tandd.com/software/)

*1: Compatible wire sizes are as follows. Single Wire : Ø0.32 to Ø0.65 mm (AWG 28 - 22), Twisted Wire : 0.08 to 0.32 mm2 (AWG 28 - 22), Ø0.12 mm or more in diameter, Stripping Length : 9 to 10 mm

*2: When Auto Upload is used frequently, the measurement of the internal sensor may rise by around 0.3°C. When using external power, the data logger itself generates heat and the internal sensor will report a temperature much

higher than ambient; we recommend using an external temperature sensor in this case.

*3: When continually used in environments with temperatures above 60°C, accuracy of humidity measurements will decrease over time. Also, humidity cannot be measured at temperatures below -20°C.

*4: Client function. HTTP(S) proxy supported.

*5: When using external power, the internal temperature of the logger rises.

*6: Battery life is highly dependant on the Auto-upload interval; at 1 min will give 10 days of usage, and at 12 hours or more will yield the maximum lifetime. Other inuential factors include LAN environment, ambient temperature,

recording interval, and battery performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.

*7: Shows the estimated battery life with Bluetooth ON. It will be 1.2 times longer with Bluetooth OFF.

*8: Shows the estimated battery life with Auto-Upload ON.

*9: For installation, it is necessary to have Administrator (Computer Administrator) rights.

The specications listed above are subject to change without notice.

Important Notices and Disclaimers

In order to properly use this product, please carefully read all documents that accompany the product before using.

»All rights of the attached documents belong to T&D Corporation. It is prohibited to use, duplicate and/or arrange a part or whole of the attached documents without the permission of T&D Corporation.

»Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

»Google, Android, and Google Play are trademarks or registered trademarks of Google Inc.

»Apple and App Store are trademarks or registered trademarks of Apple, Inc. in the U.S. and other countries.

»The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by T&D Corporation is under license.

»All registered trademarks, company names, product names and logos mentioned herein or for products being used are the property of T&D Corporation or of their respective owners.

»Specications, design and other contents outlined in the attached documents are subject to change without notice.

»Please follow the safety precautions outlined in the attached documents carefully. We cannot guarantee nor are we responsible for safety if this product is used in any manner other than was intended.

»On-screen messages in the attached documents may vary slightly from the actual messages.

»Please notify the shop where you purchased this product or T&D Corporation of any mistakes, errors or unclear explanations in the attached documents.

»T&D Corporation accepts no responsibility for any damage or loss of income caused by the use of our product.