Tannoy iw4DC User manual

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
The Tannoy iw4 DC is a full bandwidth in wall speaker system, using a 100mm (4.00")
Tannoy Dual Concentric™ point source, constant directivity drive unit, designed for
installation into standard stud partition wall systems. It may also be used in cavity wall
installations constructed with standard thickness drywall as well as a wide range of other
wall construction types with a surface thickness of up to 25mm (1.00”).
The Tannoy Dual Concentric™ drive unit comprises a multi fibre paper pulp mid bass cone
and a 19mm (0.75") ferrofluid cooled, titanium dome F unit with neodymium magnet
system. The mid-bass and tweeter sections of this constant directivity driver are
coincidentally aligned to a true point source; ensuring a wide and controlled dispersion for
optimum coverage; this while avoiding the massive loss of energy, in the vertical plane at
the crossover frequency, inherent in two-way discrete designs.
Featuring a wide bandwidth frequency response and very low distortion, the iw4 DC is also
equipped with dynamic high frequency protection. This compact unit is specifically
designed for applications requiring the combination of premium sonic quality for music and
speech reinforcement and exceptional reliability and intelligibility.
The driver and passive frequency dividing network are mounted in an injection moulded,
paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The
class leading performance is further enhanced by the inclusion of four self aligning, spring
loaded clamps; allowing for quick install but also for simple removal or reorientation of the
loudspeaker. The rigidity of the clamps and baffle combination crucially provides the
acoustically optimum bond to the wall surface without risk of distortion to the baffle itself.
Complementing any style of decor, the perforated metal grille and discreet moulded baffle
can be painted to blend seamlessly with any environment.
Gold plated spring loaded terminals are provided for ease of installation and a steel back
can is available as an optional installation accessory.
roduct Description
• 100mm (4.00") point source Dual Concentric™ driver
• Extended frequency response and very low distortion
• Wide, controlled constant directivity dispersion for
optimum coverage
• Does not suffer from massive loss of energy in the
vertical plane at crossover caused by two way
discrete designs
• UV/weather resistant UL94V-0 ABS construction for
structural integrity
• Dynamic high frequency protection
• Four way self-aligning clamp mounting system
• Ferrofluid cooled neodymium F
• Five year warranty
• Foreground music & paging systems
• Multi-room audio systems
• ome theatre
• Business music systems
• Boardrooms and offices
• Retail environments
• Retail outlets and shopping malls
• Lounges and bars
• Cruise ships
• Courtrooms
Features
Applications

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
TECHNICAL S ECIFICATIONS
Frequency Response (-3dB) (1) 88 z - 50k z
Frequency Range (-10dB) (1) 73 z - 54k z
System Sensitivity (1W @1m) (2) 88dB (1W - 2.83V for 8 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 130 degrees conical
Directivity Factor (Q) 4.4 averaged 1k z to 6k z
Directivity Index (DI) 5.3 averaged 1k z to 6k z
Rated Maximum S L (3)
Average 106dB
Average 102.5dB
(with optional T P30 transformer)
Peak 112dB
ower Handling
Average 60W
Programme 120W
Peak 240W
Recommended Amplifier ower 120W @ 8 Ohms
Nominal Impedance 8 Ohms
Distortion
10% Full ower (5.5V) 2nd armonic 3rd armonic
250 z 0.61% 0.55%
1k z 1.46% 0.68%
10k z 0.85% 0.13%
1% Full ower (1.73V) 2nd armonic 3rd armonic
250 z 0.48% 0.87%
1k z 0.43% 0.36%
10k z 0.43% 0.06%
Low Frequency 1 x 100mm (4”) Dual Concentric™ constant directivity
driver with multi fibre paper pulp cone
High Frequency 19mm (0.75”) titanium dome with neodymium
magnet system
hysical
Enclosure Baffle UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Back can (optional) zinc plated steel
Connectors Gold plated connectors with spring terminals
Hole Cutout Size 206 x 135 (8.11 x 5.31”)
Maximum wall thickness - 25mm (1.00”)
Dimensions
Front Baffle 238mm x 159mm (9.37” x 6.26”)
Front of baffle to rear 89mm (3.51”)
of magnet assembly
Front of wall to rear84mm (3.31”)
of magnet assembly
Included Accessories Painted mask, cutout template, grille
Optional Accessories Steel back can
Steel back can complete with T P30 transformer
Plaster (mud) ring
Transformer Taps (optional)
70V 30W / 15W / 3.75W / OFF & Low Impedence operation
100V 30W / 15W / 7.5W / OFF & Low Impedence operation
NET Weight 2.60kg (5.73lbs)
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
System iw4 DC Transducers
8000 4400 iw4 TDC White 1
ART NUMBER ACKED QUANTITYCOLOURMODEL NAME
Ordering Information

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
ERFORMANCE MEASUREMENTS
50
60
70
80
90
100
10 100 1000 10000 100000
0
5
10
15
20
25
30
35
40
45
50
1 10 100 1000 10000 100000
50
60
70
80
90
100
10 100100010000 100000
0 deg
10 deg
20deg
30deg
40deg
ANECHOIC
FREQUENCY
RES ONSE
IM EDANCE
OFF AXIS
RES ONSE
1m on-axis frequency response
frequency ( z)
SPL, 1W/1m (dB)
frequency ( z)
Impedence vs frequency
frequency ( z)
Impedance (ohms)
Level (dB)
Horizontal off-axis response

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
ERFORMANCE MEASUREMENTS
0
30
60
90
120
150
180
210
240
270
300
330
360
100 1000 10000
1
10
100
100 100010000
BEAMWIDTH
DIRECTIVITY INDEX
Beamwidth vs Frequency
frequency ( z)
frequency ( z)
DI vs Frequency
Q
Degrees

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
ERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
-48
-36
-24
-12
0
0
30
60
90270
300
330
100 z
125 z
160 z
200 z
-48
-36
-24
-12
0
0
30
60
90270
300
330
250 z
315 z
400 z
500 z
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
630 z
800 z
1 k z
1.25 k z
1.6 k z
2 k z
2.5 k z
3.15 k z
4 k z
5 k z
6.3 k z
8 k z
10 k z
12.5 k z
16 k z
20 k z
1.6 k z
2 k z
2.5 k z
3.15 k z
630 z
800 z
1 k z
1.25 k z

BACK CAN FITTED IN STUD PARTITON
451.0
[17.76"]
477.0
[18.78"]
3
89.1
[3.51"]
[0.49"min]
101.5 min
[4.00"min]
STUD WALL COVERING MATERIAL
FITTED AFTER BACK CAN HAS
BEEN INSTALLED IN POSITION.
440.0
[17.32"]
210.0
[8.27"]
139.0
[5.47"]
TOP
WALL COVERING MATERIAL
FITTED AFTER BACK CAN AS BEEN
INSTALLED IN POSITION.
BACK CAN FITTED IN STUD PARTITION
STUD
12.5 min
0.49” min
101.6 min
4.00” min
440.0
17.32
89.0
3.51”
451.0
17.76”
139.0
5.47”
210.0
8.27”
Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
DIMENSIONAL SKETCHES & BACK CAN ACCESSORY
201.5
[7.93"]
130.5
[5.14"]
84.0
[3.31"]
5.0
[0.20"]
238.0
[9.37"]
159.0
[6.26"]
i
84.0mm
(3.31”)
130.5mm
(5.14”)
5.0mm
(0.20”)
238.0mm
(9.37”)
159.0mm
(6.267”)
201.5mm
(7.93”)
TEMPLATE OLE CUTOUT SIZE - 206mm x 135mm [8.11” x 5.31”]
Ordering Information
8000 5130 iw4 TDC/DS Back Can Unpainted Steel 1 4.00Kgs (8.80lbs)
8000 5140 iw4 TDC/DS Transformer Back Can Unpainted Steel 1 11.00Kgs (23.1lbs)
8000 5100 Pre-install mounting ring for iw4 TDC/TS -- -
ACKED
WEIGHT
ACKED
QUANTITY
BAFFLE / GRILLE
COLOUR
MODEL NAMEART NUMBER
310.0
[12.20"]
8
96.6
[3.80"]
477.0
18.787” 310.0
12.20”
96.6
3.80”

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
The in wall speaker shall consist of a 100mm (4.00") full range, point source Dual Concentric™ transducer mounted in an injection moulded front baffle
manufactured from UV/weather resistant UL94V-0 ABS material. The two-way system shall incorporate an optimised low loss crossover network. The wiring
terminals shall be gold plated spring loaded connectors.
Performance of the in-wall speaker shall meet or exceed the following criteria: The system shall have a conical coverage angle of 130 degrees (1k z to
6k z). Frequency response measured on axis shall be 73 z -54k z (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic chamber) with
no equalization. Sensitivity shall be 88dB (1W @ 1m). Longterm power handling capacity as defined in EIA-426B test shall be 60W, recommended amplifier
power 120W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.
In 70V or 100V distributed audio systems the iw4 DC shall be used with the optional accessory T P30 high performance, low insertion loss transformer with
30, 15, 7.6 and 3.75W taps* available.
Aweather resistant perforated steel grille covers the transducer. Both the grille and baffle shall be paintable.
The system shall not exceed the following dimensions:
Front Baffle 238mm x 159mm (9.37” x 6.26”), Front of baffle to rear 89mm (3.51”) of magnet assembly, Front of wall to rear84mm (3.31”)
of magnet assembly
ole cutout size shall be 206 x 135mm or 8.11 x 5.31".
The in wall speaker system shall be the.....iw4 DC.
*70.7 Volt only
Architectural specifications
ARCHITECTURAL S ECIFICATIONS

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
iw4 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW4DC data file issue:1.06 // 15.01.08
NOTES