Tanscorp UNO FAMILY Operational manual

UNO FAMILY SMART SERVICE ROBOT
Product User Manual
Shenzhen Tanscorp Technology Co., Ltd,
http://www.tanscorp.com

Safety Warning FCC Warning Statement
Do not drop, disassembly, open, crush, bend, puncture, cutting, microwave, incinerate or paint this
robot, Also not allowed to be deformed or insert foreign objects.
Please carefully treat your robot and its accessories and place on a clean & pollution-free place.
Please carefully treat your robot and its accessories and place on a clean & pollution-free place.
Do not expose the robot and its accessories to an open flame or a litten cigarette products.
Do not expose the robot and its accessories to liquid, moisture or high temperature environments.
Do not drop, throw or try to bend robot or accessories.
Do not attempt to disassemble the robot and its accessories, disassembly operation is execused
only by authorized professionals.
Do not expose the robot and its accessories to extreme temperatures, but shall not be less than
-20 ° C, the maximum shall not exceed 50 ° C.
Please do not place the robot on an unstable table, cart, stand, tripod, bracket, or other unstable
platform to use.
Robots can use only specified power type marked on the voltage power label
Please consult your local relevant regulations about the disposal of electronic products.
UNO is baby’s friends, suitable for children aged three and above.
UNO execution action command, prohibition baby hold moving parts, avoid to damage external
components, causing UNO unable move or uncompleted move.
When on charging status, UNO can not executive move command.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installedand used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co‐located for operating in
conjunction with any other antenna or transmitter.

CONTENTS Product Profile
Introduction
Product Profile
Robot Operation
Interface Introduction
Special Application Introduction and Operation
Setting
Battery and Power Adapter
Mobile Phone Software
FAQ
Robot Specification
Packing list
Maintain
Help and Service
01
05
08
11
14
15
18
19
21
24
25
26
UNO is a family intelligent robot, which can help people to build more comfortable, convenient
and specific life scene, from education entertainment, remote control, family security to life informa-
tion, reflect the wonderful intelligent life with full range.
Feeling --- multimodal fusion perception, visual; voice interaction twin engine combines local and
cloud intelligent voice recognition engine, voice recognition are more richer based on the Internet.
Interactive --- full sensory mode of human-computer interaction, far-field speech recognition:
within five meters of natural voice interaction; intelligent multi-sensing information coupling
technique: 8 large sensors interactive to enhance magic experience.
Control --- Diversified control way, whole body movement, language control. Controling Robot
movement, remote monitoring by voice, touch screen, sensors, mobile phones, pad etc, and phone
/ tablet can also receive feedback information from the robot.
Battery Installation
1.Use a cross screwdriver to unscrew the screws of UNO bottom battery compartment cover,
remove the cover.
2.Relatively plugging in the battery power cable with same color power cord inside the battery
compartment, then stuck the battery and power cord into the battery compartment, to pull the flap of
preventing the battery from shaking.
3.Install the battery compartment cover and tighten the screws.
UNO 01

Initial start Robot Diagram
Front View Side View
Initial start-up, UNO will enter into the active robot interface, you can finish activation according to
screen instructions. In order for you to enjoy more features and services, such as: Online Chatting、
Video Call etc., we recommend that you choose the Internet to activate the robot.
Note:
1. UNO wireless network factory default setting is on.
2. The robot ID factory-configured, users only need to set a password.
Head prees sensor
Camera
Right eye
Left ear touch sensor
Left shoulder sensor
Speaker
Portable
Neck touch sensor Neck touch sensor
Back touch sensor
Chest sensor
Omni-directional wheel
Omni-directional wheel
Rechargeable USB battery compartment
Left food wheel
Bluetooth switch
Wi switch
Ear eyes light switch
Right food wheel
Mouch LED light
Left eye
Display
Voice receiver
UNO 02 UNO 03

Robot Button
Push Key
open or close screen display
Volume +
Push key, Pop-up volume bar and volume increase.
Volume –
Push key, Pop-up volume bar and volume decrease.
Power switch
Power on: push the key with 3 secs, power indicator lights，It represents the robot has started.
Power off: push the key with 3 secs, power indicator off，It represents the robot has closed.
If UNO is under the charge state, press and hold the button for 10 seconds then
shut down, or unplug the charger and then perform shut down operations 5.
Voice control commands
Robot Operation
Voice Control Operation
To control UNO to make appropriate language, movement or function jump etc feedback by voice.
Such as: speak “Dance”, UNO perform singing and dancing.
Say “play game”, UNO will enter into game interface.
Say “sing children song”, Uno will enter into children song interface.
Back View
Back speaker
Rear sensor
Power switch
Power input
DC 12V
UNO 05UNO 04

Voice control command use time
When waking-up UNO and do not enter the specific application program, can perform UNO voice
command operation.
Note: When UNO screen displays standby interface, indicating UNO is at standby mode, using
voice commands, "Hi, UNO! " then can wake up UNO.
Voice control command use method
1. After UNO making a "beep" tone, they can say voice command.
2. Normal use: Operate UNO gradually according to the interface guidance.
3. Shortcut use: quickly open your desired interface or application program.
Such as: In the main interface, Say “chatting”,screen will enter into on line chatting interface.
4. In the non-primary interface use voice commands, “Hi, UNO” Screen can jump to the main
interface.
5. Using voice command "return", the screen jumps to the previous interface.
Note:
(1) The icons and buttons name on UNO screen operation interface can be used as voice
command.
(2) When using voice commands, try to keep surroundings environment quiet.
(3) Please talk with UNO with English and normal speed.
Touch operation
Interface icons and buttons
On UNO screen interface, click, slide, or long press the icon or button to implement the relevant
operation.
virtual keys
After turning on robot, part of the interface of the virtual button (Figure 1) will be hidden in the top
of the screen can be sliding down to use for touch.
Keys Instruction:
Volume down Click the pop-up volume bar and the volume is reduced
Return Back to pervious interface or exit the application program
Main interface Back to main interface
Program running list Pop up backstage running application program list
Volume up Click the pop-up volume bar and increase volume
Note: Virtual keys can only touch operation.
(Figure 1)
UNO 06 UNO 07

Interface Introduction
Standby Interface
Touch Sensor
Under the start-up state, UNO feed backs corresponding voice or action when you touch its body
sensor.UNO body has eight sensors: head (Pat), left ear, right ear, neck, chest, left arm, right arm,
back.
UNO tacitly enter the standby state after starting up (Figure 2), the next step can be carried out
after waking-up UNO, to the next step. Main interface
UNO tacitly enter the standby state after starting up (Figure 2), the next step can be carried out
after waking-up UNO, to the next step.
Three operation ways to awaken UNO:
1. Voice control operation: Say the voice command, "Hi, UNO!" ，enter the main interface.
2. Touch control operation: Click the left top corner of the screen【】main interface button,
enter main interface.
3. Touch sensor ,touch left ear.
Please click right top corner of the scren if need help【】help button, enter voice control help
interface.
Note:
1. At the standby interface, touch left ear and enter into voice control conversation state, touch
other sensor then play its sensor's voice or action.
2. During UNO executes voice or motion, touch sensor interrupts current speech or action, plays
sensor corresponding speech or action, continue to voice control conversation after finish.
3. In particular application program,touch sensors make related feedback according to software
design.
(Figure 2)
UNO 08 UNO 09
hi,uno

Special application introduction and operation
Chatting
In the chat interface, say relevant voice control command according to screen display(Figure IV),
UNO feedback corresponding voice or action after recognition.
Two operation modes for using chating:
1. voice control operation: Say voice command “Talking”
2. Touch screen operation: Main Interface—>learn—>Talking
Note: You can also chat in other applications other than the interface. Such as: the main interface to
speak directly to the voice of the chat command “What is your name”, “What can you do”, “Who is
your dad”etc.
Interface Description:
FIGURE NAME DESCRIPTION
(Figure 3)
(Figure 4)
learn Learning knowledge, cognitive software
Art Sing children song, listen music software
Game Play Game software
Setting Cloud space, system settings, member management
UNO 10 UNO 11
Learn
A
A
Art
Game
Setting
ArtLearn
A
A
SettingGame

God Eyes
Use Video communication and Remote Monitoring function with smart mobile phone.
When connected with mobile phone, two way of use Video communication by God Eyes.
1. voice operation: say voice command. The command format is "I want to find + role name". Such
as: "I want to find my mother", "I want to find my father" and so on.
2. Touch screen operation: the main interface -> God Eyes
Remark:
1. The remote control function will be operated in mobile phone.
2. Pls refer to chapter 3 for more details on software download and connection instruction.
Smart alert
UNO will give you instant tips timely according to your setting.
Two ways on alert setting
1. Voice control: UNO will generate smart alert according to your voice command under the
operation of smart cloud. , The proposed format of voice command is : alert+time+event. e.g.
“pls remind me to participate in meeting at 3 o’clock””pls remind me to join the party of my friends
at 6 o’clock”.
2. Screen touching: Home page----house keeper---smart alert.
Close Chatting
When you do not want to chat with UNO, there are two operation modes:
1. Voice control operation: say voice command "Return".
2. Touch operation: Click the botton【】on the top left corner of the screen.
Two ways to start the cloud intelligence:
Voice control: Say voice control command ”chatting”
2. Interface Operation: main interface —>learn—>chatting
Two ways to close Chatting:
1. Touch screen operation: touch the【】return button on the upper left corner of the screen.
On line chatting(figure 5). Uno will chat after connecting network.
Chatting
(Figure 5)
UNO 13UNO 12

Setting
Battery and power adapter
Battery
U03S comes with rechargeable lithium-ion, restrict the manufacturer appointed original batteries
Cloud Space
(Figure 6)
Interface button instruction:
Calling record
Adding new members
Edit member information, including profile, name,equipment name, and connection methods.
Go back
App center: Download more early childhood education, entertainment and interactive function
application software.
AI Voice library: Download more small excellent voice, voice and other select voice Push.
Video: Download and upload video.
Audio: Download and upload audio.
Photo: Download and upload photo
System Set
Setting up network connection, Bluetooth connection, display brightness, sound volume, system
and product information.
Group Management
Manage U03S connection access to the mobile phone or other mobile device (see picture VI).
Robot ID
Check the Robot ID and password when robot and phone connection.
Restore default setting
Restore the robot system data and default settings.
UNO 14 UNO 15
Andy (mom) IPONE Cellphone
IPONE Cellphone
HUAWEI Cellphone
Jenni(Grandma)
Member list
David(dad)

Remark:
Battery service time may vary depending on usage situations.
The new battery is recommended to be charged, make sure it’s at least 10 centigrade before
charging. For the first time, please charge at least 3-8 hours to fully activate the battery.
Warning!
Avoid fire or burns:
1. Do not attempt to open, disassemble or repair the battery.
2. Do not crush, puncture, short external contacts or in a fire, water.
3. Do not put it in above 60 centigrade (140 degrees Fahrenheit) ambient.
4. Use only batteries designated for the device to be replaced.
5. please recycle or dispose of a battery in accordance with local regulations.
Remark:
1. Improper use of the power cord may cause serious damage.
2. Do not use the AC power adapter, remove it from the power outlet.
3. You can charge when the AC adapter is connected to the U03S, and the battery is installed.
4. Need to use the Ground socket outlets when adapter charging, prevent electrical short circuit
damage from the machine
5. Barred from baby touch the machine when standby charging.
6. If not using U03S, we recommend that you charge every 15 days once, in order to ensure the
battery is in the best active condition.
7. When using the AC power adapter for AC power supply, required battery installed.
and accessories. Batter performance affected by many factors, including operation temperature,
select and use the functions and settings, connect to the port project, the way of use your voice, data,
other programs and so on.
Estimate of Battery Service time of:
Normal standby time (Turn off screen) is 720 minutes
Normal standby time (Turn on screen) is 360 minutes
Uninterrupted entertainment operates 300 minutes
Uninterrupted action sports 260 minutes
Power adapter
U03S can be supply power by lithium-ion battery modules or the AC power adapter, the battery
will automatically recharge when using the AC power.
If charge the AC adapter, be sure to perform the following steps:
1. Plug the adapter into an electrical outlet.
2. Make the adapter charging head connected to U03S charging jack.
Charging status:
1. Flashing rapidly around the ear, eye light turned off, indicating that the machine is in charging.
2. Left and right ear lights slow flashing, eyes light slow flashing, indicates that battery is full.
UNO 16 UNO 17

Mobile phone software
Download and install software
Mobile phone and other mobile device download and install God Eyes software.
Connect UNO
Cannot charge
Open mobile phone app, according to the prompt of software, follow the steps do relative opera-
tions on mobile phone and U03S screen. Once connected, you can interact with U03S by mobile
phone.
Remark:
UNO and mobile phone should in WI-FI connection status then can be interconnected.
FAQ
How to treat
Do not try to disassemble or modify the battery module, as it may cause an explosion or a battery
module leakage.The battery module of the demolition or modification is out of the range of guarantee
non KANGLI YOULAN specified battery module. Inappropriate replace battery may cause explosion.
The battery module contains a small amount of harmful substances, in order to avoid potential
personal injury:
1. Only replace with Specified battery by KANGLI YOULAN
2. Do not put the battery module near fire.
3. Do not expose the battery module in water or rain.
4. Do not disassemble the battery moduble.
5. Do not short-circuit the battery.
6. Keep away children from the battery module.
7. Do not place the battery module in bury garbage. Please dispose the battery module according
to local ordinances or normative safety standards.
Remark:
1. You can scan the God Eyes software two-dimensional code or login Shenzhen TanscorpTech-
nology Co., Ltd. official website to download software
2. The operating system of Mobile phone or other mobile device should beAndroid system 4.0-4.3
1. Check the power adapter if is normal working.
No response to voice
control 1. Please make sure UNO is on voice control status, if not please
go turn on the voice control interface.
2. Check the interface of adapters and UNO if is normal working.
3. Plug the charge to check if UNO can startup, if battery still cannot
charge after startup, maybe the batter being aging, replacement of
the battery is recommended.
UNO 18 UNO 19

Robot Operation
Error response to voice
control
Mobile phone or other
mobile device can not
connect with UNO
No response to voice
control
1. UNO did not understand your question, it is recommended to use
correct Mandarin pronunciation and normal speed to issue voice
commands.
2.Please try to be close to UNO when use voice dialogue.
1. Check UNO and Mobile phone WI-FI if on turn on status.
Mobile phone and UNO
had already connected,
but enter God Eyes
cannot make sound.
1. Make sure the mobile wireless network is properly connected
with UNO.
Mobile phone cannot
use the remote control
and video call function.
1. Make sure the phone is properly connected with UNO through
wireless network.
2. make sure the network is unblock, such as network data transfer
is too slow, it will affect a large extent on use .
3. Please ensure UNO battery with enough power, keep more than
20% power.
2. UNO power runs out, recommend charging immediately.
2. Reboot UNO and mobile phone network then connect.
2. Voice is too small, Mandarin pronunciation is not correct, recom-
mend dialogue by use normal speed and correct mandarin pronun-
ciation.
WIFI cannot connect
or can not connect
with internet.
Dancing halfway
automatically turned
off or suddenly without
any action.
1. Make sure the internet go flow.
UNO do no response
1. Need try reboot UNO, please keep holding down Power button
for 3 seconds to switch UNO, then start. If UNO still does not
respond, remove and reinstall the battery and then start.
2. Check whether power connected, Robot if power runs out.
2. Reboot WIFI then connect.
UNO battery out of power, recommend charge immediately.
Power adapter Power Input AC 110V-240V, 50Hz/60Hz
Power Output 12VDC/3A max
Battery
Type lithium
Rated voltage / capacity
Maximum charge voltage 8.4V
7.4V/4500mA(H)
UNO 21UNO 20

Maximum charge / discharge current 2.0A/3.0A
charge time 3~4 hour
Structure
Battery
Size (L*W*H) 298*271*400mm
Weight (include battery)
Material ABS
4.6kg
Camera
Quantity Head X1
stereoscope
dots per inch 1280x720
CMOS
visible angle 100~120 °
Audio
Loudspeaker Shoulder X2, back X1
impedance
frequency range 200-20KHz
8Ω
Microphone Quantity X2 (breast)
sensitivity -32±3dB
Power 3W
Focus type
framerate 12~25 FPS
Fixed focus
frequency range 150-12KHz
impedance 2.2KΩ
LCD Display
Dimension 7 inch
resolution
material TFT
1024*600
infrared sensor
Touch points 10 point
Quantity
Length of Wave 940nm
Front X1, Back X1
departure angle +/-60°
touch sensor
Ear 2 pcs, Blue
LED
Microphone
Mouth 1 pcs, Red
power light 1 pcs , Red/Green
Eye 2 pcs, Blue
watts
Head pressure sensor, Left ear touch sensor, Right ear touch sensor,
Neck touch sensor, Chest touch sensor, Left shoulder touch sensor,
Right shoulder touch sensor, Back touch sensor
8mW/Sr
UNO 22 UNO 23

Packing list
UNO
Unit battery
Power Adaptor
Screwdriver
Quick use guide
Product user manual
Certificate
Maintain
Maintain Tips
In order to extend product life, warmly remind:
1. Keep UNO surface clean. When cleaning robot, unplug all cables and turn off UNO, use a soft,
slightly damp, Lint-free cloth to gently wipe the robot. Do not use detergent or corrosive chemicals
to wipe machines, especially the screen.
2. Keep UNO away from moisture, high temperatures.
3. Avoid to put long time in sunshine, it will lead to the rapid aging of the plastic shell.
4. Avoid crushing machine or sharp objects dashed screen.
5. Please place a cool dry place.
Clean UNO
1. Please use cleanser (Do not contain abrasive powder or strong chemical component, such as
acid or alkali) to clean robot.
2. Do not make water get inside the robot.
3. Wipe dry the surface of the robot after cleaning.
4. f there is scratches on the screen, it may be generated when the chassis is being squeezed from
external stains. Use soft Dry cloth gently wipe or remove stains.
5. If the stains still exists, use water or a ratio of 1:1 isopropyl alcohol and water mixture of wetting
no velvet soft cloth, try to twist and dry the cloth: wipe the screen again.
Head Down up 60°, Left right 120°
Leg exercise wheel 360°
Connect WIFI WiFi 802.11b/g/n
Bluetooth
System Google Android 4.3
4.0 (BLE)
Language
Software infrastructure ARM
Dual engine voice interaction and
automatic speech recognition Chinese, English
Degree
of freedom
UNO 24 UNO 25

Help and Service
You can find the latest news, support information, how to solve problem, find new ways to use
UNO or the convenient software to use UNO from Tanscorp website: http://www.tanscorp.com
Please connect the local distributor.
UNO 26 UNO 27