TaoTronics SoundLiberty Pro S10 User manual

Questions or Concerns?
[email protected]
TAOTRONICS
SoundLiberty Pro S10
USER MANUAL

Deutsch 11
LANGUAGES
English 01
Français 21
Español 31
Italiano 41
日本語 51

Charging Slot
Charging Indicator
Reset Button
USB-C Charging Port
EN
1
2
3
4
1
Ladeschacht
Ladeanzeige
Reset-Knopf
USB-C-Ladeanschluss
DE
1
2
3
4
Ranura de Carga
Indicador de Carga
Botón de Reinicio
Puerto de Carga USB-C
ES
1
2
3
4
Slot de Charge
Voyant de Charge
Bouton de Réinitialisation
Port de Charge USB-C
FR
1
2
3
4
Slot per la Ricarica
Indicatore di Ricarica
Pulsante di Reset
Porta di Ricarica USB-C
IT
1
2
3
4
充電スロット
充電インジケーター
リセットボタン
USB-C充電ポート
JP
1
2
3
4
2 3 4
Charging Contacts
Microphone
Multifunction Touch Control
EN
5
6
7
5
6
7
Ladekontakte
Mikrofon
Multifunktions-Touch-Steuerung
DE
5
6
7
Contacts de Charge
Microphone
Multifonction Touche Tactile
FR
5
6
7
Contactos de Carga
Micrófono
Control Táctil Multifunción
ES
5
6
7
Contatti per la Ricarica
Microfono
Controllo Touch Multifunzione
IT
5
6
7
充電接続部
マイク
多機能タッチコントロール
JP
5
6
7

Steady Red
Battery Low
Wearing
12
Charging
1. Place the earbuds into the charging case.
2. Close the case and connect to any USB charging port with the included cable.
We highly recommend that you fully charge the earbuds before
using them for the first time.
SETTING UP YOUR EARBUDS
EN
SETTING UP YOUR EARBUDS
(02-03)
USING YOUR EARBUDS
(03-07)
CLEANING AND MAINTENANCE
(07)
TROUBLESHOOTING GUIDE
(08-10)
CONTENTS
01 SoundLiberty Pro S10 02
SoundLiberty Pro S10
Breathing White
Charging
Steady White
Fully Charged

03 SoundLiberty Pro S10 04
SoundLiberty Pro S10
Power ON / OFF
ON
Uncover the lid
to power on.
OFF
Place back and close the
case to power off.
USING YOUR EARBUDS
Bluetooth Caution
• Place the two devices to be connected close to each other and turn off
other Bluetooth devices.
• The maximum effective Bluetooth range may vary with the environmental
circumstances. Obstacles (walls, fences, etc.) between the two devices
may shorten the effective range.
Bluetooth Pairing - Binaural Mode
1. Uncover the lid to bring into pairing mode automatically.
2. Turn on the Bluetooth function on your device and search for nearby devices.
3. Find “TaoTronics S10” in the search results, tap to connect.
• Each time you power on your earbuds, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
• When the earbuds are disconnected from your device for more than
10 minutes, they will turn off automatically.
Bluetooth Pairing - Mono Mode
• When Bluetooth connected, you can use either one of the earbuds as per
your preference.
• Take out one earbud, and make sure the other one is placed in the case with the
lid covered.
• If you want to change to binaural mode, simply take out the other
earbud from the charging case, they will pair with each other automatically.
• Under Mono mode, swiping up or down is changing the volume, no matter
which earbud is in use.
ON TaoTronics S10

Controls and Functions
05 SoundLiberty Pro S10 06
SoundLiberty Pro S10
x2
L /R
Play / Pause L /R
2s
Voice Assistant
x1
Single Tap Hold
Double Tap
x2
Swipe DownSwipe Up
R
Volume Up
Previous Track L
R
Volume Down
L
Next Track
Answer L /R
x1 2s
L /R
Reject
Hang Up
Volume up Volume down Next song Previous song
Play music Pause music Pick up Hang upHey TT
When the earbud is taken off
under music, the music will be
paused. And the touch control
will be deactivated.
Voice Control
· Voice control is enabled by default. Tap and hold the left earbud for 5s to
disable/enable voice control. The battery life would be longer if voice
control is disabled.
· You can easily control your earbuds with the voice commands below.
The wake-up rate may be affected when using voice control in noisy
environment.
In-Ear Detection
Disable / Enable Voice Control
5s
L

Manually Pairing
1. Place both earbuds back in the charging case with the lid uncovered.
2. Press and hold the Reset Button for 3 seconds until the LED indicators on the
charging case flash white twice.
3. The earbuds will go into pairing modeautomatically.
• Wipe only with a dry, soft cotton swab or equivalent.
• Never insert anything into the nozzle.
• Clean the earbuds and the charging case regularly.
• Keep away from sharp objects to avoid scratches.
• Place in a dry and shady place if they are not in use for a long time.
• DO NOT clean with detergent or chemicals.
CLEANING AND MAINTENANCE
TROUBLESHOOTING GUIDE
Securely wear the earbuds (see “Wearing”).
Earbuds fall off easily :
• Make sure the Bluetooth function is activated before pairing.
• Place the device to be connected close to the earbuds.
Move both devices away from other Bluetooth devices.
• Remove the earbuds from the Bluetooth list when
already paired before.
• Reset the earbuds and pair again
(see "Resetting Your Earbuds").
Cannot connect with your device :
• Make sure there are no obstacles between the two devices.
• Fully charge the earbuds.
• Reset the earbuds and pair again
(see "Resetting Your Earbuds").
Intermittent connection for one of the earbuds :
• Make sure the earbuds are within the effective range
of your device. The range may vary with the
environmental circumstances.
• Turn off other Bluetooth devices to decrease
the interference.
• Remove the earbuds from the Bluetooth list and
connect again.
Bluetooth disconnected frequently :
Wearing
Bluetooth
Connection
1. Remove "TaoTronics S10" from the Bluetooth device list.
2. Place both earbuds back in the charging case with the lid uncovered.
3. Press and hold the Reset Button for 10 seconds until the LED indicators on the
charging case flash white three times.
4. The pairing history will be cleared and the earbuds will go into pairing
mode automatically.
Resetting Your Earbuds
07 SoundLiberty Pro S10 08
SoundLiberty Pro S10
If you want to pair the earbuds with a new device.

• Try in a quiet indoor environment.
• Clear any debris from the earbud nozzles.
• Place both devices close to each other or remove the
obstacles between them.
• Try with a different audio source or device.
• For poor call quality, check that the microphone is not
blocked or covered.
Poor sound quality :
• Clear any debris from the earbud nozzles.
• Try with a different audio source.
Earbuds in different volume :
• It is normal that a slight white noise will be heard under
in a quiet environment.
• Try in an open space without disturbance.
Chirping sound :
• Check if the battery of the earbuds or charging case
is low or empty (see “Charging”).
• Make sure there is no dirt or debris covering the
charging contacts on the earbuds or the charging
pins in the case.
Earbuds do not turn on / working :
• Make sure you are touching the correct touch
control area.
• Make sure you put on the earbuds properly.
• Make sure your fingers are dry.
Earbuds do not respond to touch control :
• Make sure there is no dirt or debris covering the
charging contacts on the earbuds or the charging
pins in the case.
• Place both earbuds in the charging case properly
until they magnetically snap into place.
• Make sure the charging case is fully charged.
If charging failed, try with another 5V 1A charger.
Failed to charge the earbuds / charging case :
• For optimal battery life, make sure the earbuds are
fully charged.
• The actual battery life may vary with the music type
and volume used to some extent. If it is 2 or more
hours shorter as described, please contact our
Customer Support for replacement.
• The more the number of charge and discharge cycles,
the shorter the battery life.
• The more the number of over discharges, the shorter
the battery life. Charge the earbuds at least once
every 6 months.
Battery life shortened after using for an
extended period of time :
Sound Help
Operation
Charging
The troubleshooting guide addresses the most common problems. If problems persist,
feel free to contact the Customer Support at suppor[email protected].
09 SoundLiberty Pro S10 10
SoundLiberty Pro S10

Tragen
12
Ladevorgang
1. Legen Sie die Ohrhörer ins Ladegehäuse.
2. Schließen Sie das Gehäuse und verbinden Sie es über das mitgelieferte Kabel
mit einem beliebigen USB-Ladeanschluss.
Wir empfehlen eingehend, die Ohrstöpsel vor der ersten Verwendung
vollständig aufzuladen.
Akkustand Niedrig
Rot konstant
Am Laden
Weiß pulsierend
Vollständig
Weiß konstant
EINSTELLEN IHRER OHRHÖRER
DE
EINSTELLEN IHRER OHRHÖRER
(12-13)
BENUTZEN IHRER OHRHÖRER
(13-17)
REINIGUNG UND PFLEGE
(17)
PROBLEMBEHANDLUNG
(18-20)
CONTENTS
11 SoundLiberty Pro S10 12
SoundLiberty Pro S10

ON TaoTronics S10
13 SoundLiberty Pro S10 14
SoundLiberty Pro S10
EIN- / AUSSCHALTEN
AN
Zum Einschalten
Deckel öffnen.
AUS
Zum Abschalten zurück ins Gehäuse
legen und dieses schließen.
BENUTZEN IHRER OHRHÖRER
Hinweise zum Bluetooth
• Platzieren Sie die beide zu verbindenden Geräte nahe beieinander und
schalten Sie andere Bluetooth-Geräte aus.
• Die maximale effektive Bluetooth-Reichweite kann je nach
Umgebungsbedingungen variieren. Hindernisse (Mauern, Zäune usw.)
zwischen den beiden Geräten können die effektive Reichweite verringern.
Bluetooth-Kopplung - Binauraler Modus
1. Öffnen Sie den Deckel, damit diese automatisch in den Kopplungsmodus wechseln.
2. Schalten Sie die Bluetooth-Funktion Ihres Geräts ein und suchen Sie nach
Geräten in der Nähe.
3. Suchen Sie in den Suchergebnissen “TaoTronics S10” und tippen Sie zum
Verbinden darauf.
• Jedes Mal, wenn Sie Ihre Ohrhörer einschalten, wird automatisch eine
Verbindung zu Ihrem letzten erfolgreich verbundenen Gerät hergestellt,
sofern es sich innerhalb der Bluetooth-Reichweite befindet.
• Wenn die Ohrhörer über 10 Minuten von Ihrem Gerät getrennt sind,
schalten Sie sich automatisch ab.
Bluetooth-Kopplung - Mono-Modus
• Wenn eine Bluetooth-Verbindung besteht, können Sie je nach Wunsch einen der
beiden Ohrhörer verwenden.
• Nehmen Sie einen Ohrhörer heraus und vergewissern Sie sich, dass der andere
Ohrhörer bei geschlossenem Deckel im Gehäuse liegt.
• Wenn Sie in den binauralen Modus wechseln möchten, nehmen Sie
einfach den anderen Ohrhörer aus dem Ladegehäuse heraus; die beiden
Ohrhörer werden automatisch miteinander gekoppelt.
• In Mono-Modus lässt sich die Lautstärke durch Wischen nach oben oder
unten regeln, unabhängig davon, welcher Ohrhörer verwendet wird.