TAPE DISPENSER TDA080 User manual

TDA080
Electric Tape Dispenser
4
2
3
1
Load Tape
A: Slide tape roll onto core holder
B: Place loaded core on holding bracket
Power Off
A: Ensure power button is set to off
Open Top Panel
A: Open top door panel
B: Remove tape shaft from unit
Dispenser
Core Holder Silicon Oil
Power Cord
Affix Tape to Feed Roller
A: Affix tape onto feed roller
B: Re-insert tape shaft into guide
A
B
AA
B
ITEMS INCLUDED
A
B
TDA080_Quick_Start_Guide_b022808Page 1 5/6/2008 11:55:28 AM

6
5
LD5000
7
Feed Tape
A: Choose desired operation mode:
- FEED
- MANUAL (feed & cut)
- AUTO (feed & cut)
- INTERVAL (feed & cut)
A: Connect power cord (in back)
B: Press power switch (on front) to turn
on the machine
Plug In - Turn On
A: Close top panel door
B: Press advance button to feed tape
A
TDA080 (NM & K Models)
B
A
B
A
8
A: Set desired tape length (mm) by
pushing up or down buttons
Quick Start Guide
4270 Airborn Dr. Addison, TX 75001, USA
972.248.1999 | [email protected]
startinternational.com
Need more help? Download the full manual or contact us
Select Mode
A
Q8.2