Tascam AUDIO RECORDER User manual

• Install two AA batteries in the recorder’s rear
sliding compartment. An on-screen indicator
will display the battery level.
• Insert a microSD card facedown into the right
side panel until it clicks into place.
• To turn on the recorder, press Home for about
two seconds.
• To prepare to record, press Record.The recorder
will enter standby mode. Write down the le
name of the recording for reference.
• With the recorder in standby mode, set the input
level to “auto.” From the home screen, press
Quick, select “level control,” then press Play.
Press +and −to select “auto levels,” then press
Play. An icon in the upper-left
corner of the display will
indicate that the recorder is
in auto level mode.
AUDIO RECORDER INSTRUCTIONS

• Place the recorder as close to the subject as
possible, with one microphone facing him or
her and one facing you. Eliminate background
noise if possible.
• Press +and −to adjust the volume.
• To begin recording, press Record again.The red
indicator will light continuously.
• To stop recording, press Stop/Home.The audio
le will be saved.
• To play back a le, press Forward and Back to
nd the le, then press Play.
• To delete a le, press Forward and Back to locate
the le.Then press Quick and Play to delete.
Conrm the deletion, and press Play again.
• To turn off the recorder, hold down Home for
about two seconds.
• To download your audio les, connect the
recorder to a computer with the included USB
cable.
© 2013 by Intellectual Reserve, Inc. All rights reserved. Printed in the USA. English approval: 2/13