Taski Combimat swingo 3500 User manual

combimat
swingo 2500/3500
ATTENTION!
Before first start-up, it is essential that you read the instructions of use
and the safety notes carefully.
Keep the instructions of use in a good and easily accessible place so that they
can be consulted at any time.
Instructions of use
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

2
Content
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
before putting into service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Beginning work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
End of operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Finishing work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Service, maintenance and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Malfunctions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Squeegee settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Recommended chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
EU Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Symbols
Intended use of machinery
The scrubber dryer is used to clean hard floor surfaces according to these
instructions of use.
The machine is suitable for floor cleaning applications in industrial and commercial
areas such as hotels, schools, hospitals, factories, shopping centres, offices etc.
Nonobservance of this information can endanger people and / or cause
servere damage!
Nonobservance of this information can lead to malfunctions and property
damage!
Important information about economical use. Nonobservance of this
information can lead to malfunctions!
Action points.
STOP
STOP
t
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

3
Safety instructions
Due to their design and construction, TASKI machines comply with health and
safety requirements of the EC guidelines and therefore carry the CE sign.
This machine may only be used by persons who have been properly
trained to do so!
Do not use the machine in rooms where explosive and flammable
substances (e.g. petrol, paint thinners, heating oil, solvents, etc.) are
stored or processed. The electrical or mechanical components of the
machine could lead to an ignition of these materials.
Do not use this machine to vacuum toxic, poisonous, caustic or irritating
substances (e.g. acids, alkalis, hazardous dusts, etc.). The filter system
will not adequately retain these kinds of material. A possible impairment
of the health of the user and of third parties cannot be excluded.
While operating the machine, take note of the surrounding area and pay
particular attention to third parties and children!
Caution:
Pay attention to the accident prevention regulations!
Caution:
No second person may be transported!
Caution:
Only use tools which are specified in the instructions of use under
accessories and which the TASKI-technical specialist recommends
(Page 30), as the use of other tools could impair safety.
Caution:
Personnel safety is covered by appropriate national regulations!
Only use the machine on level floors or inclines of maximum 13%.
This symbol on the machine indicates that it is not suitable for use on surfaces
with greater inclines.
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
13%
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

4
Important! Switch the machine off when you:
• e.g., carry out cleaning, maintenance or repair work, replace components or
change to another function
• replace the tools or other accessories
• store it in a suitable room to avoid any unauthorised use of the unit
• leave the machine unsupervised
To do so, pull out the main switch key and stop the machine from rolling away (e.g. by
fixing a wedge).
Store the machine in a dry, dust-free room with a corrosion-free atmosphere.
The temperature must not fall below +10 °C nor exceed +35 °C. Low temperatures,
damp and dust can significantly reduce the service life of the electrical components.
This machine is only intended for use in dry areas, and must not be used
or stored in the open air under damp conditions.
The tank cap must be closed when moving or driving the machine.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

5
Transport
Transport the machine in upright position or disassemble the batteries for
transportation.
Make sure that the machine is tightly secured in the transportation vehicle so that
the batteries cannot fall over in any way.
Disposal
When placed out of service, the machine and its accessories must be disposed of
according to the national regulations. Your TASKI partner can support you with
proper disposal upon notification.
Batteries
The batteries must be removed from the machine before being disposed of
properly.
Used batteries must be disposed of in an environmentally appropriate way
according to EU guidelines 91/157/EEC
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

6
Overview
1Probe (dirty water tank full)
2Nozzle-/ tube holder
3Option: Recycling filter
4Soiled solution tube
5Flexible suction hose
6Tank cover
7Squeegee
8Suction filter
9Recovery tank
10 Rear steering drivewheel
11 Fresh water tank (diaphragm sack)
with dosing cup
12 Disconnector charger jack
13 Brush unit
14 Impact protection
15 Parking brake
16 Drive pedal
17 Brake pedal
18 Forwards / Backwards lever and
horn
19 Keyswitch
20 Control panel
21 Steering wheel
22 Drivers seat adjustment
23 Driver seat with safety switch
24 Battery cover (main fuse and battery
plug)
25 Tank hood
26 Suction filter
1
2
3
6
7
4
15
16
17
5
18
19
20
8 9 10 11 12 13 14
2122
23242526
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

7
27 Brush button ( +/- )
28 Cleaning solution button ( +/- )
29 Display button
30 Slow drive button
31 Vacuum on/off
32 Service indicator
33 Recovery tank full indicator
34 Cleaning solution empty indicator
35 Display indication while turning on
the machine
36 Suction aggregate ON
37 Suction aggregate OFF
(soiled solution tank full)
38 Tool aggregate ON
39 Fault accelerator pedal
40 Hours in total
41 Tool aggregate hour indicator
42 Hours of operation
43 Error code
44 Brush pressure on / off
45 Battery indicator
46 Cleaning solution on/off
27
28
29
34 35
36
Display
32 3330
37383940414243444546
31
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

8
before putting into service
Batteries
Safety measures when working with batteries:
• Never bring an open flame or a glowing objects into the vicinity of the battery,
as there is a danger of explosion from the electrolytic gas present in the cells!
No smoking!
• The battery must always be clean and dry. Do not place any metallic objects on
the battery.
• Beware of sulphuric acid! Caustic. Do not inhale. Avoid any contact with the
skin or eyes. Wear protective goggles when working on the battery.
• Observe the operating regulations of the battery manufacturer.
Charging procedure (traction block batteries with external charging
unit)
After completing the charging and with immediate use:
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tFold the driver seat forward and open the battery cover.
tDisconnect the connection between the battery and the machine with the
battery disconnection socket.
Caution:
Battery compartment must be open during charging.
tConnect battery plug with the external battery charger.
tSwitch off charger.
tDisconnect the charger plug.
tConnect the battery to the machine with the battery disconnection socket.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

9
Parking brake
Locking:
Unlocking:
Adjust the seat:
Transport
The driving direction and speed can be controlled with the steering wheel and
accelerator pedal. The speed is continuously adjustable.
tBy first pressing down the brake pedal (1) and then the
parking brake (2).
Release the brake pedal,and the machine is locked.
tBy pressing the brake pedal fully down.
The machine is unlocked.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tLoosen the lock on the left side of the driver's seat and
push it to the desired position.
tLock the seat into position.
Check seat locking device!
tUnlocj the parking brake (see ‚Parking brake‘ Page 9).
tUnlocj the parking brake (see ‚Parking brake‘ Page 9).
tSwitch on the machine (keyswitch).
The indicators light up.
The battery indicator displays that the machine is ready for
operation
(on malfunction see page 25).
1
2
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

10
Fixing tools
Check:
• that the brushes are not below the red marking and that the bristle length is not
less than 1 cm.
• the pad for wear before using.
Attach squeegee
Fill the fresh water tank
tspecify driving direction by using the driving direction
lever (Forwards/Backwards).
tRun the machine to the destination and then release the drive pedal.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
Working with worn out, damaged and or wrong tools, could result in possible
damage to floor or their protective layers.
tTurn the left tool counter-clockwise and the right tool
clockwise into the lock.
This locks the tool into place.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tLoosen the fixation knobs on the squeegee.
tAssemble the squeegee and tighten the fixation knobs.
The washers must be positioned above the suction nozzle support.
tAttach the suction hose (squeegee) to the connector.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

11
Beginning work
Begin cleaning operation
tFold the driver seat forward and open the tank cover.
tTake the dosing cup out of the fresh water tank (diaphragm sack).
Caution:
Maximum permissible water temperature 60 °C/140 °F.
tFill the fresh water tank with water (diaphragm sack).
The markings show you the maximum permitted filling
level.
tAdd the product measured with the measuring cup to the water in the fresh
water tank (diaphragm sack).
Dose the cleaning solution, Page 31.
tLay dosing cup in tank.
tClose the tank lid and fold the driver's seat back.
tTurn the machine on (main switch).
The indicators light up.
The last used cleaning program will be saved.
tUnlocj the parking brake (see ‚Parking brake‘ Page 9).
tPress the button vacuum.
The indicators light up.
tPress the solution button.
The indicators light up.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

12
If you do not drive the machine to the battery charger, then:
• after 10 min. the tool aggregate and the suction nozzle will be lifted off the
ground.
• after 10 sec. the suction aggregate turns itself off.
• you have 10 more min. of time to get to the battery charger before the machine
turns itself off.
tChoose the amount of solution with +/- button for
setting the amount (min. level 1/ max. level 7).
tPress the brush pressure button.
The indicators light up.
tIncrease the brush pressure by using +/- button (min.
level 1/ max. level 4).
tspecify driving direction by using the driving direction
lever (Forwards/Backwards).
Caution:
Take turning radius into account!
tBy gently pressing the speed control in driving
direction, the machine is set in to motion.
The tools start to turn and the solution is fed through the
middle of the tool.
tPress slow drive button, when in delicate environment.
The indicators light up and the drive speed is reduced.
If none of the bars in the battery indicator have lit up, drive
the sweeping-suction machine to the battery charging unit.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

13
Recycling mode (Option)
Cleaning method
Direct method:
Scrubbing and Vacuuming in one pass.
Indirect working method:
Scrubbing and vacuuming in several passes.
Cleaning methods are described in detail in the "Method Card". You can obtain
"Method Cards" from your TASKI partner or representative.
Caution:
The recycling system is not to use in areas with high hygienic demand e.g.
Hospitals, Food-processing companies, Kitchens, etc.
The recycling system is recommended for low till middle congested areas only.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tFold the driver seat forward and open the tank cover.
tPull the recycling filter out of the fresh water tank (diaphragm sack).
tSet the recycling filter into Recovery tank.
Caution:
Maximum permissible water temperature 60°C/140°F.
tFill water into the solution tank.
The maximum allowable filling level must be 20 cm bellow the rim the of tank!
tAdd the product measured with the measuring cup to the water in the fresh
water tank
Dose the cleaning solution, Page 31.
tClose the tank lid and fold the driver's seat back.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

14
Refilling the solution tank
Cleaning solution tank indication empty:
Caution:
Do not clean without solution, as it could cause floor damage.
tWhen the cleaning solution indicator lights up it is
accompanied by a tone simultaneously.
Cleaning solution tank is empty.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tEmpty or refill the machine again (page 16/10).
tWhen tank is filled, the cleaning solution indicator
empty continues to light up.
tDrive machine to desired destination.
tPress the vacuum button.
The indicators light up.
tPress the solution button.
The indicators light up.
tPress the brush pressure button.
The indicators light up.
tSlowly press down the acceleration pedal (approx. 5
sec.).
Then the "cleaning solution empty indicator" will be reset.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

15
Emptying soiled recovery tank
Recovery tank full indicator:
tWhen the soiled solution tank indicator lights up, the
suction nozzle will rise and the suction aggragate turns
off.
tEmpty the recovery tank (Page 16).
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

16
End of operation
After cleaning
Finishing work
Drain the recovery tank / fresh water tank
The disposal of the dirty water or the cleaning solution must be carried out in
accordance with the appropriate national regulations.
Proceed as follows for both tanks:
tStop the flow of solution.
tDrive a further few metres to avoid subsequent ,,dripping’’.
Very important when using contact pads!
tPress the brush pressure button.
The tools will be stopped.
tDrive on a few metres further in order to pick up the remaining waste water.
tOnly now switch off the vacuum unit.
The suction nozzle rises and the suction aggregate keeps on
running for approx. 10 sec.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
Always drain and clean the recovery tank every time you use the machine.
If the dirty water is allowed to stand, unpleasant smells and deposition of the
dirt will take place after a few hours.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tRemove the hose from its holder.
Open the red cover at handle height and slowly lower the end of the hose
to pour out the contents.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

17
Soiled solution pump (Option)
Empty into higher elevation:
Drain the recovery tank / fresh water tank
Recycling filter (optional):
tLift the fresh water tank (diaphragm sack).
tLay the fresh water tank (diaphragm sack) in the recovery tank.
Cleaning solution leakage.
tRemove the empty fresh water tank (diaphragm sack) from the recovery
tank.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tConduct the emptying hose to a drain sink or a bucket.
tPress the soiled solution pump button.
It will only be emptied up to the standpipe in the soiled
solution tank.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tFold the driver seat forward and open the tank cover.
tUnscrew the tank lid (page 6).
If necessary with the special tank tool.
tClean the recovery tank thoroughly.
tScrew down the tank lid with both hands.
tThoroughly flush out the fresh water tank (diaphragm sack) with fresh water.
tRefit the fresh water tank (diaphragm sack) onto the equipment.
tRemove dirt from tube.
tBrush the suction filter with a soft brush or remove the fluff with a cloth.p
tTake out recycling filter after every use and clean it if necessary.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

18
Remove and clean the squeegee
Removing and cleaning the squeegee
Caution:
Clogged filters reduce the flow of the cleaning solution. As a consequence
you may damage the floor coating.
tPlace the recycling filter in the fresh water tank (diaphragm sack).
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tLift the tool lightly.
tTurn the left tool clockwise and the right tool counter
clockwise out the lock.
tClean the tools under running water.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tRemove the suction hose.
tLoosen the fixation knobs on the squeegee.
tDisassemble the suction nozzle and tighten the fixation
screw.
tClean the squeegee under running water with a brush.
tHang the suction nozzle onto the nozzle-/tube holder.
Clean blades produce streak-free results!
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

19
Cleaning the machine
storage / parking of machine (machine is idle)
Never store the machines with closed tanks.
In this way the tank can dry out. Unpleasant smells and the occurrence of mould will be
reduced.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
Caution:
Never clean the machine with a high water pressure or a water hose.
The ingress of water into the machine might cause considerable damage to
mechanical or electrical parts.
tPull out the key and operate the parking brake (see Parking brake‘ Page 9).
tFold the driver seat forward and open the tank cover.
tFit the ventilation strap,and plave the tank cover on it .
The ventilation clamp keeps the tank open for air
circulation.
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

20
Service, maintenance and care
Maintenance
The machine's maintenance is a pre-condition for trouble-free running and a long
life.
Caution:
Only original spare parts must be used, otherwise Warranties and
liabilities will be omitted!
Symbols:
◊= After use, ◊◊ = Every week, ◊◊◊ = Every month, ⊗= Service light
Activity ◊ ◊◊ ◊◊◊ ⊗ page
Recharge batteries 8
Refill distilled water (wet batteries) Please adhere the monitoring booklet! 21
Drain and clean the recovery tank 16
Clean the suction filter 25
Cleaning recycling filter (Option) 17
Check suction filter and clean if necessary 6
Empty the fresh water tank (diaphragm sack) and rinse out with fresh water 16
Cleaning the tools 18
Clean squeegee, check whether the blades are worn and replace if
necessary 18
Wipe down the machine with a moist cloth 19
Clean level probe (full recovery tank) and test functionality 17
Clean seal of tank hood, check for cracks and replace if necessary 17
Maintenance programs by TASKI service made by TASKI technician
ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com