Taxitronic TX52 User manual

TX52
USER’S MANUAL
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

INDEX
1.- SWITCHING THE TAXIMETER ON
2.- OPERATING THE TAXIMETER FOR A SERVICE
2.1.- HIRED POSITION
2.2.- INTRODUCING EXTRAS IN HIRED
2.3.- STOPPED POSITION
2.4.- CANCELLATION OF MANUAL EXTRAS
2.5.- INTRODUCING EXTRAS IN STOPPED
2.6.- ADDING THE EXTRAS TO THE FARE
2.7.- PRINT A TICKET
2. .- GOING BACK TO FOR HIRE
3.- TOTALIZERS SEQUENCE
3.1.- ACCUMULATIVE TOTALIZERS
3.2.- DAILY TOTALIZERS
4.- SPECIAL FUNCTIONS
4.1.- TO CLEAR DAILY TOTALS
4.2.- VISUALIZATION OF THE ACCUMULATIVE TOTALIZERS
4.2.1.- BLOCK 1 VISUALIZATION
4.2.2.- BLOCK 2 VISUALIZATION
4.2.3.- BLOCK 3 VISUALIZATION
4.3.- DATE AND TIME VISUALIZATION
4.4.- DISPLAYS TEST
4.5.- LAST SERVICE DATA VISUALIZATION

1.- SWITCHING THE TAXIMETER ON.
Taximeter in OFF.
Taximeter in ON pressing the Okey. If there is a pasword programmed, the second point in the
status display, will blink waiting the introduction of the code.
If no passowrd is required or once the correct code is introduced the taximeter goes to ON.
Taximeter in OFF pressing the O key.
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

2.- OPERATING THE TAXIMETER FOR A SERVICE.
2.1.- ENGAGING A FARE.
Press 1, 2, 3or 4key to start the right tariff.
For tariffs 5, 6, 7 and 8, whilst key +is pressed, press key 1, 2, 3or 4.
2.2.- INTRODUCING EXTRAS IN HIRED
By pressing key the text HIRED will start flashing.
Add the extras needed by pressing keys 1, 2, 3o 4.
To leave the extras sequence press key .
2.3.- STOPPED POSITION
To go to stopped position press key .
2.4.- CANCELLATION OF MANUAL EXTRAS
Whilst key is pressed, press key .
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

2.5.- INTRODUCING EXTRAS IN STOPPED
By pressing key the text STOPPED will start flashing.
Add the extras needed by pressing keys 1, 2, 3o 4.
To leave the extras sequence press key .
2.6.- ADDING THE EXTRAS TO THE FARE
By pressing + key the extras will be added to the fare amount during 5 seconds.
After this time, this total amount will be broken down again into fare and extras.
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

2.7.- PRINT A TICKET
By pressing O key . The state display will flash during 10 seconds.
Press + key during the state indicator is flashing. After 10 seconds the service receipt will be
printed.
2.8.- GOING BACK TO FOR HIRE
Press O key.
3.- TOTALIZERS SEQUENCE
3.1.- ACCUMULATIVE TOTALIZERS
By pressing key appears the total number.
By pressing again key the other 5 figures of the total will be displayed. The totalizers
sequece can be aborted at any moment by pressing the key O.
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

After few seconds, if the key is not pressed, it switches to the next total, following the next
list.
- 1 Nr. of trips.
- 2 Fare amount.
- 3 Extras amount.
- 4 Total amount.
- 5 Total Km.
- 6 Paid Km.
- 7 Free Km.
- 8 Time in hired (hours).
- 9 Time in on (hours).
- A Nr. of daily totalizers cancellations.
3.2.- DAILY TOTALIZERS
After, the daily totalizers are showed by continuing pressing the key according to the next
list.
- 1. Nr. of trips.
- 2. Fare amount.
- 3. Extras amount.
- 4. Total amount.
- 5. Total km.
- 6. Paid km.
- 7. Free km.
- 8. Tiempo en hired (Minutes).
- 9. Tiempo en ON (Minutes).
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

4.- SPECIAL FUNCTIONS
4.1.- TO CLEAR DAILY TOTALS
Press key.
The decimal dots of the fare display will turn ON for selecting the option.
Press 1key, the first decimal dot of the display will start flashing, waiting to confirm the clear
sequence.
Press 1 key again; All daily totals.
Once the totals cancellation os done, the taximeter will go back to FOR HIRE.
4.2.- CONTROL BLOCKS VISUALIZATION
Press key.
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

The decimal dots of the fare display will turn ON for selecting the option.
Press key, the fifth decimal dot of the display will start flashing, indicating that the
visualization of the control blocks has been requested.
Press key again.
4.2.1.- BLOCK 1 VISUALIZATION
C.1 Constant K introduced.
Press key for going to the next visualization or it goes automatically after few seconds:
- C.1 Constant "K" introduced
- C.2 Tariff serial number
- C.3 Tariff recording date (Y.MM.DD)
- C.4 Agent's code
- C.5 Tariff identification control number.
- C d Prechange tariff identification control number.
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

- C f Prechange tariff activation date
- C 8 Nr. of constant «K» changes
- C 9 Nr. of tariff changes
Presser la touche + pour imprimer les blocs de contrôle.
4.2.2.- BLOCK 2 VISUALIZATION
L.1 License number of the car.
Press key for going to the next visualization. The data displayed in block 2 are the following:
- L.1 License number of the car.
- L.2 Board serial number.
- L.3 Manufacturing date (YYMMDD).
- L.4 Installation date (YYMMDD).
- L.5 Installation agents code.
- L.6 Manufacturer code.
4.2.3.- BLOCK 3 VISUALIZATION
I.1 State led tariff 1 indication
Press key for going to the next visualization or it goes automatically after few seconds.
The data displayed in the block 3 are the following:
- I.1 State led tariff indication
- b.1 Initial price
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

- M.1 Meters first drop.
- S.1 Seconds firs drop.
- d.1 Price per Km.
- H.1 Price per hour.
- P.1 Price per Km. in stopped position.
- E.1 Extra amount assigned to these tariff.
Once finished the blocks visualization, the taximeter goes automaticaly to for hire.
The sequence can be aborted at any time by pressing the key O .
4.3.-DATE AND TIME VISUALIZATION
Displaying the time by pressing key
By pressing key gagain the date is displayed.
By pressing O key or after few seconds it switches to FOR HIRE.
Date Visualization.
By pressing key gagain the year is displayed.
By pressing O key or after few seconds it switches to FOR HIRE.
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm

Year visualization.
By pressing O key or after few seconds it switches to FOR HIRE.
4.4.- TEST SECUENCE
Press key.
The decimal dots of the fare display will turn ON.
Press key to display the test sequence. (0,1, ...,9).
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE £ FARE P.
£ EXTRAS P.
mi
hh.mm