TCL MS1G User manual

EN - 1
CJB1RV003AAA
MS1
Whole Home WiFi Mesh System MS1G
(2 pack)
Quick installaon guide

EN - 2
Package contents
• MS1 x2
• Power adapter x2
• Ethernet cable x1
• Quick installaon guide x1
Know your device
WPS / RESET
WAN POWER
LAN
LAN port WPS/RESET
buon
DC power jack
WAN port
Install the TCL WiFi App
Download the TCL WiFi App on your mobile device by searching
for TCL WiFi in App Store or Google Play or by scanning the QR
code. Then, install the App.
Available for iOS
and Android
Or

EN - 3
Connect the primary node
The rst node you set up funcons as the primary node, while
the rest are referred to as the secondary nodes.
1. Use the included Ethernet cable to connect a LAN port of
your modem or the Ethernet jack to the WAN/LAN port of
any node. This node is your primary node.
2. Use one of the included power adapters to connect the
primary node to a power source, the LED indicator lights
solid on. Wait about for 40 seconds.
The system completes startup when the LED indicator blinks
green. Place your MS1 on a stable posion when using it.
Connect the primary node to the
internet
1. Go to the WIFI network list on your mobile device, select
the SSID of the primary node, and enter its password. The
SSID and password are specied on the boom label of any
node,
2. Run the TCL WiFi App and ow the onscreen instrucons to
connect the primary node to the Internet. Aer the primary
node is connected to the internet, its LED indicator lights
solid green.
TCL_XXXXXX
TCL_XXXXXX
TCL_XXXXXX
TCL_XXXXXX
LAN
IPTV
Game device
POWER
WPS/RESET
WAN
(CPE/Wi-Fi router/
XDSL/PON)
Desktop PC