Teac LEV3292HD User manual

MODEL: LEV3292HD
Note: Please make sure that the unit is completely disconnected from the main power supply before changing cable connections.
2.Insert batteries according to +/- polarity symbols.
(Not Supplied)
(Not Supplied)
(Not Supplied)
R-in L-inVideo
(Not Supplied)
(Not Supplied)
Y Pb Pr
HDMI3 USB
HDMI1 HDMI2 COAX
R-in L-inVideo Y Pb Pr
R-in L-inVideo Y Pb Pr

auto tuning (ATV and DTV signals).
(For more details see"Customising the CHANNEL settings", page 16 of User Manual.)
“DTV”, “ATV”, "AV", "PC", "YPbPr", "DVD", "HDMI1",
CH
+/-
+/-
+/-
+
-
10
1. Connect a USB/Hard Disk Drive (HDD) at the side panel as shown by the picture as below. 2. After USB/HDD is connected, you will need to format it before doing any recording. 3. Follow instructions below to enter DVR menu to format USB / HDD:
Press menu button on the remote control. Select CHANNEL tab and press enter. Scroll down and select DVR File System.
Select Start to format USB / HDD.
A Connect your antenna to the RF port.
Connect to the power cord, and turn on the power by the SWITCH.
B
C
Recording
nacSotuAVTnohctiwS
USB Media Playback
A Connect a USB/Hard Disk Drive (HDD) at the side panel of the unit. B Press USB button on the remote control.
(For more details, refer to "Multimedia Operation", page 23-27 of User Manual.)
"HDMI2", “HDMI3”, "USB".
123
456
789
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECT
SLEEP
EXIT
DISPLAY
CH
CH
VOL VOL
HOLD
D.MENU D.TITLE VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE S UBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
123
456
789
0
OK
CH.FAV
AUDIO MUTE
DTV/USB INPUT
PICTURE SOUND ASPECT
SLEEP
EXIT
DISPLAY
CH
CH
VOL VOL
HOLD
D.MENU D.TITLE VOL
TV/TXT CANCEL REVEAL REPEAT
D.SETUP
SUBTITLE A-B GOTO
SIZE S UBPAGE INDEX
DELETE REC.LIST SCH.LIST SCREEN
MENU
EPG
0118020315
WARNING: Formatting an external drive would erase all memory in the system. Please make sure that no important documents are stored in the external drive before formatting. TEAC is not responsible for any loss of data.
TEAC CUSTOMER SUPPORT HOTLINE (TCS)
1300 553 315
Between Monday to Friday – AEST 8:30AM to 6PM
→
1Hr.
E
USB NOTE: For best performance with external HDDs, use a HDD
with an external power supply. Use only USB for recording.
HDMI3 COAX
HDMI2
HDMI1
R-in L-inVideo Y Pb Pr
HDMI3 USB
HDMI1 HDMI2 COAX
Move MENU: Return EXIT: Exit
Signal Information Channel Edit Manual Scan Auto Scan
Channel