
EASY TO INSTALL
Inside or outside your vehicle.
Delivered complete with :-
• 4 fixing screws and polyethylene
mounting bracket
• Correct fuse and fuse holder
• Full instruction
• Just connect 2 x 4mm wires
directly to the battery and your
are ready to roll.
REAL HAND HYGIENE
Unique finger tip controlled tap
can’t collect dirt and grease.
Washing under hot running water
- dirty water goes direct to
Waste-Safe. No bowl to collect
suds and grease.
SAFETY AND CONTROL
Automatic electronic control means:-
• Battery safer with NO drain on power
• ideal water temperature at 45˚C
+/- 2˚C
• Fast water heating, NO WATER safety
Lock-out.
• NO seperate switch needed.
DESIGN AND BUILT TO LAST
Robust construction of fully moulded,
high impact polyethylene; insulated
throughout with expanded polyethylene
OPTIONAL EXTRAS
Soap dispenser and bracket - HM/SB
Paper towels and holder - HM/TH
Metal mounting panel - HM/MP
HANDEMAN RANGE
®
TEAL Patents LTD
Unit 2, Waterloo Avenue, Chelmsley Wood Industrial Estate,
Chelmsley Wood, Birmingham, B37 6QQ, UK
TEL: +44(0)121 770 0593 FAX +44(0)121 770 0385
You can order online:- www.tealwash.com
SPECIFICATION
Weight empty 3kg, weight full 5.3kg
Max capacity 2.5 litres - 10 twelve seconds washes
HM12 RED LABEL 12 vol 180 watt/15 am p
HMP12 PURPLE LABEL 12 volt 120 watt/10 am p
HM24 BLUE LABEL 24 volt 250 watt/10 am p
HMP230 GREEN LABEL 230 volt 250 watt/1 amp
HMINS PALE BLUE LABEL Insulated
HANDEMAN is a registered Trade mark No. 2387108
and Design Registration is No. 3020652
IN CAB USE
HANDEMAN
low power version
HMP12 uses a cigarette lighter
socket and is fitted with a 1.8m
lead and DIN plug. It also has a
carrying handle for complete
portability.
®
300 mm
175 mm
315 mm
325 mm
180 mm
190 mm
M6
75 mm
Separate Fixing bracket position
M6 X 80 centres
PORTABLE UNIT
With the excellent insulation
properties of the
HANDEMAN
HMINS, the water will stay hot for
up to 5 hours depending on the
initial temperature of the pre-
heated hot water used. Supplied
with 4 fixings, mounting bracket
and carrying handle.
®
MAINS VERSION
HANDEMAN
model HMP230 is
a mains version for wall mounting.
Complete with fitting instructions,
4 wall fixings, mounting bracket,
carrying handle and 1.8m lead with
13 amp plug, HMP230 complies
with all current electrical and EMC
regulations
®