
MENU FUNCTIONS
1. Operation mode
buttons or
2. Exit the menu
3. Factory settings
or
4. Relays
5. Min/Max pre-set temperature
DESCRIPTION
Controller assets:
built-in temperature and humidity sensor
intended to be mounted in a frame
HOW TO INSTALL
WARNING
NOTE
HOW TO CHANGE THE PRE-SET TEMPERATURE
the buttons or
HOW TO REGISTER THE REGULATOR
screen will display REg
screen will display SUcErr displayed on
the screen means that an error occurred
NOTE
or to
6. Auto-lock
or
7. Calibration
The Cal function enables the user to calibrate the sensor within
8. Hysteresis
The His function enables the user to set the room temperature
or
22.3
~
N
L
COMNO NC
HOW TO USE THE CONTROLLER
• REGULATOR DESCRIPTION
1
34
2
• DISPLAY DESCRIPTION
1
2
4
22.3