TECHCON SYSTEMS TS924 Installation manual

12151 Monarch Street, Garden Grove, CA 92841 •[phone] •[phone] fax •www.okinternational.com
TS924 FOOT VALVE
SETUP AND OPERATING INSTRUCTIONS
PRODUCT DESCRIPTION: The TS924 Foot Valve is a rugged and easy to use, floor mounted
dispenser
SPECIFICATIONS:
Size ……………………………………………….8” x 5” x 5” (20.3 x 12.7 x 12.7 cm)
Weight ……………………………………… 4 lbs. (1.82 kg)
Input Pressure ……………………………… 100 psi max (7 bar)
Operating Pressure ………………………………. Up to 100 psi (7 bar)
SETUP AND OPERATION
1. Connect hose assembly to foot valve, then to 100 psi maximum dry filtered air supply
2. Insert quick connect end of Receiver Head assembly (air adapter) of syringe or Production
Master Cap Cartridge assembly into Air Outlet port of the Foot Valve and turn clockwise
until secure.
3. Rotate air regulator knob clockwise to increase dispense pressure. Pressure gauge will
indicate desired pressure setting.
4. Press on the foot valve lever to activate the dispense cycle. Material should flow as long as
the pedal is depressed.
5. The amount of material dispensed per cycle depends on the combination of air pressure,
duration or dispense cycle, viscosity of material, temperature and dispense tip size.

12151 Monarch Street, Garden Grove, CA 92841 •[phone] •[phone] fax •www.okinternational.com
PARTS LIST
No Part Number Description Qty No Part Number Description Qty
1 534 Coupler 1 8 TSD1118-5 Bumper 4
2 TSD1105-24 Screw 10-32 x 1/4 6 9 TSD915-1 Reducer Nipple 1
3 TSD1124-10-8 Roll Pin 2 10 TSD1105-25 Screw 10-32 x 3/8 1
4 TSD500-29 Air Regulator 1 11 924-16 Valve Body Assy 1
5 924-10 Adjustment Button 1 12 924-19 Air Hose (not shown) 1
6 TSD1115-52 Hex Nut 1 13
7 TSD600-21 Pressure Gauge 1 14
8
5 6
10 90
psi
MADE IN U.S.A.
ASHCROFT
100
0
50
70
80
60
30
20
40
12
7
4
3
10
11
T9000076_A