TECNOEKA EKF 411P User manual

USE AND INSTRUCTION MANUAL
USE AND INSTRUCTION MANUALUSE AND INSTRUCTION MANUAL
USE AND INSTRUCTION MANUAL
MODD.
MODD. MODD.
MODD. E
EE
EKF
KF KF
KF 411
411411
411 P
P P
P –
––
– EKF 416 P
EKF 416 P EKF 416 P
EKF 416 P –
––
– E
EE
EKF
KF KF
KF 464
464464
464 P
P P
P
rev.
rev. rev.
rev. 1
11
1
TECNOEKA
TECNOEKATECNOEKA
TECNOEKA S.r.l.
S.r.l.S.r.l.
S.r.l.
Via
Via Via
Via Marco Polo
Marco PoloMarco Polo
Marco Polo n.1
n.1 n.1
n.11
1 1
1 -
--
- 35010
3501035010
35010 Borgoricco
BorgoriccoBorgoricco
Borgoricco (Padova) Italy
(Padova) Italy(Padova) Italy
(Padova) Italy
Tel. [phone]
Tel. [phone] Tel. [phone]
Tel. [phone] –
––
– +39.049.5791
+39.049.5791+39.049.5791
+39.049.5791479 Fax [phone]
479 Fax [phone] Fax [phone]
479 Fax [phone]
www.tecnoeka.com
www.tecnoeka.comwww.tecnoeka.com
www.tecnoeka.com E
EE
E-
--
-mail:
mail: mail:
mail: [e-mail]
[e-mail]@tecnoeka.com
[e-mail]

TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 2 ___________________________________________________________________________________________
CE
DECLARATION OF CONFORMITY
Annexed document II A of directive 2006/42/EC
Annexed document II A of directive 2006/42/ECAnnexed document II A of directive 2006/42/EC
Annexed document II A of directive 2006/42/EC
Manufacturer’s name TECNOEKA Srl
TECNOEKA SrlTECNOEKA Srl
TECNOEKA Srl
Manufacturer’s address Via
Via Via
Via Marco Polo
Marco PoloMarco Polo
Marco Polo 1
1 1
11
11
1 -
--
- 3501
35013501
35010
00
0 Borgoricco
BorgoriccoBorgoricco
Borgoricco (PD)
(PD)(PD)
(PD)
Manager’s name of technical file Minotto Lorenzo
Minotto LorenzoMinotto Lorenzo
Minotto Lorenzo
Manager’s address of technical file Via
Via Via
Via Marco Polo
Marco PoloMarco Polo
Marco Polo 1
1 1
11
11
1 -
--
- 3501
35013501
35010
00
0 Borgoricco
BorgoriccoBorgoricco
Borgoricco (PD)
(PD)(PD)
(PD)
Type of product Electronic oven
Electronic ovenElectronic oven
Electronic oven
Purpose of the product C
CC
Cooking food
ooking foodooking food
ooking food
Model E
EE
EKF
KF KF
KF 411
411 411
411 P
P P
P –
––
– E
EE
EKF
KF KF
KF 416 P
416 P416 P
416 P –
––
– E
EE
EKF
KF KF
KF 464
464464
464 P
PP
P
TECNOEKA Srl declares that the mentioned above products meet the following safety
regulations:
Low voltage directive 2006/95/CE
Electromagnetic compatibility Directive 2004/108/CE.
TECNOEKA Srl declares that the mentioned above products meet the following harmonised
standards:
CEI EN 60335-1 ; CEI EN 60335-2-42
CEI EN 55014-1 ; CEI EN 61000-3-2 ; CEI EN 61000-3-3 ; CEI EN 62233
TECNOEKA Srl declares that the mentioned above products meet the following directives:
Machine Directive 2006/42/CE;
Directive on the general safety of products 2001/95/CE;
Directive on the restriction in the use of dangerous substances in electrical and electronic
appliances 2011/65/CE;
Directive on waste from electrical and electronic appliances 2002/96/CE (RAEE).
TECNOEKA Srl declares that the mentioned above products meet the
CE 1907/2006 (REACH) Regulation
Borgoricco 15/01/2015. ________________________________
________________________________________________________________
________________________________
Signature of a Representative of the Board of directors
(CRISTINA LORA)

Electric Ovens rev. 0____ _ ___ _ ___ ___ ___ ___ ___ ___ __ ___ _ ___ ___ ___ ___ ___ ___ _ EKF 411 P – EKF 416 P – EKF 464 P
__________________________________________________________________________________________ page 3
Index
IndexIndex
Index
1.
1.1.
1. Technical service
Technical serviceTechnical service
Technical service
2.
2.2.
2. General warnings
General warningsGeneral warnings
General warnings
3.
3.3.
3. Technical specifications
Technical specificationsTechnical specifications
Technical specifications
4.
4.4.
4. Instructions for the installer
Instructions for the installerInstructions for the installer
Instructions for the installer
5.
5.5.
5. Use instructions (for the user)
Use instructions (for the user)Use instructions (for the user)
Use instructions (for the user)
6.
6.6.
6. Residual risks (for the user)
Residual risks (for the user)Residual risks (for the user)
Residual risks (for the user)
7.
7.7.
7. How to use the control panel
How to use the control panelHow to use the control panel
How to use the control panel
8.
8.8.
8. Oven cooking
Oven cookingOven cooking
Oven cooking
9.
9.9.
9. Cooking advi
Cooking adviCooking advi
Cooking advice
cece
ce
10.
10.10.
10. Routine cleaning and maintenance
Routine cleaning and maintenanceRoutine cleaning and maintenance
Routine cleaning and maintenance
11.
11.11.
11. Technical
Technical Technical
Technical assistance
assistanceassistance
assistance
12.
12.12.
12. Informations to the consumers
Informations to the consumersInformations to the consumers
Informations to the consumers
13.
13.13.
13. Wiring layout
Wiring layoutWiring layout
Wiring layouts
ss
s
14.
14.14.
14. The Warranty
The WarrantyThe Warranty
The Warranty
15.
15.15.
15. Availability and supply of spare parts
Availability and supply of spare partsAvailability and supply of spare parts
Availability and supply of spare parts
X:\Sgq\PRODOTTI\1 - FORNI\FORNO ELETTRICO\LEka\MANUALI D'USO - Forno Elettrico 40 60
90 - LEka\Lingua Inglese\NUOVA GAMMA EF\Instruction manual EKF 411 P - EKF 416 P - EKF
464 P - GB - rev. 1.doc

TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 4 ___________________________________________________________________________________________
1.
1. 1.
1. Technical service
Technical serviceTechnical service
Technical service
A technical check-up once or twice a year helps prolong the life of the appliance and guarantees
better operation. Make sure that assistance is carried out solely and exclusively by qualified
personnel.
For any spare parts orders or for any information about the appliance always mention the serial
number and model (data indicated on the "technical data" plate at the rear of the oven).
2
22
2.
. .
. General warnings
General warningsGeneral warnings
General warnings
Very important!: keep this instruction book together with the appliance for future consultation.
These warnings were drafted for your safety and for that of others. Please read them carefully
before installing or using the appliance:
-If on receipt of the goods the packaging
packagingpackaging
packaging is damaged write the following on the delivery
note: “I REVERSE THE RIGHT TO CONTROL THE GOODS”
“I REVERSE THE RIGHT TO CONTROL THE GOODS”“I REVERSE THE RIGHT TO CONTROL THE GOODS”
“I REVERSE THE RIGHT TO CONTROL THE GOODS” specify the damage and get the
driver to sign in acceptance; send a claim in writing to the seller within 4 calendar days
from the date of receipt. No claim shall be accepted after such period.
-The warehouse inside temperature must not be lower than -9°C; otherwise the
thermostat (regulation and safety thermostat) control devices of the machine will be
damaged. Failure to observe this prohibition invalidates any responsibility of the
manufacturer of the machine.
-The appliance is intended for professional use and must be utilised by qualified personnel
trained to use it.
-Any modification which may be necessary on the electrical system to enable installation of
the appliance must be carried out solely by competent personnel.
-It is dangerous to modify or attempt to modify the characteristics of this appliance.
-Never clean the appliance with direct water jets because if any water enters it could limit
the machine's safety .
-Before doing any maintenance or cleaning jobs disconnect the appliance from the
electrical mains and allow it to cool.
-When the tilting door is wide open do not put anything on the surface because the door
hinges could be irreparably damaged .
-Do not attempt to carry out the periodic controls or any repairs by yourself. Contact the
nearest Service Centre and use only original spare parts.
N.B.:
N.B.: N.B.:
N.B.: Improper or incorr
Improper or incorrImproper or incorr
Improper or incorrect use and failure to observe the installation instructions shall release the
ect use and failure to observe the installation instructions shall release the ect use and failure to observe the installation instructions shall release the
ect use and failure to observe the installation instructions shall release the
manufacture from all responsibility.
manufacture from all responsibility.manufacture from all responsibility.
manufacture from all responsibility. In this connection the directives in the "POSITIONING"
In this connection the directives in the "POSITIONING" In this connection the directives in the "POSITIONING"
In this connection the directives in the "POSITIONING"
paragraph must be strictly observed.
paragraph must be strictly observed.paragraph must be strictly observed.
paragraph must be strictly observed.
3.
3. 3.
3. Technical specifications
Technical specificationsTechnical specifications
Technical specifications
Dimensions of app
Dimensions of appDimensions of app
Dimensions of app
liance LxDxH (mm)
liance LxDxH (mm)liance LxDxH (mm)
liance LxDxH (mm)
790x750x635
Weight (Kg)
Weight (Kg)Weight (Kg)
Weight (Kg)
50 4
Convection heating element (kW)
Convection heating element (kW)Convection heating element (kW)
Convection heating element (kW)
6
Max. absorbed power (kW)
Max. absorbed power (kW)Max. absorbed power (kW)
Max. absorbed power (kW)
6 4
Power supply voltage (V)
Power supply voltage (V)Power supply voltage (V)
Power supply voltage (V)
380V~ (50/60Hz)
Power cable diameter
Power cable diameterPower cable diameter
Power cable diameter
4x2 5 mm
2
Type of cable
Type of cableType of cable
Type of cable
H07RN
-
F
Connecting electric cable
Connecting electric cableConnecting electric cable
Connecting electric cable
Tipo Y
Class
ClassClass
Class
I
Degree of protection against humidity
Degree of protection against humidityDegree of protection against humidity
Degree of protection against humidity
IPX3
The noise level of the appliance in operation is below 70 dB (A).
The noise level of the appliance in operation is below 70 dB (A).The noise level of the appliance in operation is below 70 dB (A).
The noise level of the appliance in operation is below 70 dB (A).
The "technical data" plate is positioned on the rear panel of the appliance.
The "technical data" plate is positioned on the rear panel of the appliance.The "technical data" plate is positioned on the rear panel of the appliance.
The "technical data" plate is positioned on the rear panel of the appliance.

Electric Ovens rev. 0____ _ ___ _ ___ ___ ___ ___ ___ ___ __ ___ _ ___ ___ ___ ___ ___ ___ _ EKF 411 P – EKF 416 P – EKF 464 P
__________________________________________________________________________________________ page 5
4.
4. 4.
4. Instructions for the installer
Instructions for the installerInstructions for the installer
Instructions for the installer
The following instructions are aimed at the qualified installer to ensure that he carries out the
installation adjustment and maintenance operations as correctly as possible and according to
current legal regulations. Any operation must be performed with electrical power cut to the
appliance. Before using the appliance carefully remove the special adhesive film protecting the
parts in stainless steel. Do not leave any glue residues on the surfaces. If necessary remove them
at once with an appropriate solvent.
Positioning
PositioningPositioning
Positioning - Position the appliance perfectly horizontally on a table or similar support (the table
or support must be at least 85 cm above the floor). Position it at a distance of not less than 10
cm from the side and rear walls to enable natural ventilating air to circulate freely around it. The
appliance is ventilated through specific openings on the metal walls of the outer housing and
ensures efficiency and long-life. For this reason it is strictly forbidden to obstruct these ventilation
openings even partially or for short periods. Failure to observe this specific prohibition releases
Failure to observe this specific prohibition releases Failure to observe this specific prohibition releases
Failure to observe this specific prohibition releases
the manufacturer of the appliance from all responsibility and immediately voids any guarantee
the manufacturer of the appliance from all responsibility and immediately voids any guarantee the manufacturer of the appliance from all responsibility and immediately voids any guarantee
the manufacturer of the appliance from all responsibility and immediately voids any guarantee
rights for the said appliance
rights for the said appliance rights for the said appliance
rights for the said appliance because its constructive conformity has been voluntarily
compromised. Furthermore the appliance is not suitable for embedding and for grouped
positioning with other identical appliances.
Electrical connection
Electrical connectionElectrical connection
Electrical connection - The appliance must be connected to the electrical mains according to
current legal regulations. Before making the connection make sure of the following:
-the voltage and frequency values of the power supply system match the values on the
"technical data" plate affixed on the appliance;
-the limiting valve and the system are able to support the appliance's load (see the
"technical data" plate);
-the power supply system has an adequate earth connection according to current legal
the power supply system has an adequate earth connection according to current legal the power supply system has an adequate earth connection according to current legal
the power supply system has an adequate earth connection according to current legal
regulations;
regulations;regulations;
regulations;
-a omnipolar switch with minimum between-contacts aperture of the overvoltage category
III (4000 V) sized to the load and conforming to current legal regulations is fitted
between the appliance and the mains in the direct connection to the mains;
-the omnipolar switch used for connection is easy to reach when the appliance is installed;
-the yellow/green earth wire is not int
the yellow/green earth wire is not intthe yellow/green earth wire is not int
the yellow/green earth wire is not interrupted by the switch;
errupted by the switch;errupted by the switch;
errupted by the switch;
-the power supply when the appliance is operating must not deviate from the rated
voltage value by ±10%;
-make sure that after inserting the power supply cord into the terminal block it does not
come into contact with any of the cooking range's hot parts.
-if the supply cable is damaged then it must be replaced by the manufacturer or by your
if the supply cable is damaged then it must be replaced by the manufacturer or by your if the supply cable is damaged then it must be replaced by the manufacturer or by your
if the supply cable is damaged then it must be replaced by the manufacturer or by your
technical support or by a qualified person to avoid any risk.
technical support or by a qualified person to avoid any risk.technical support or by a qualified person to avoid any risk.
technical support or by a qualified person to avoid any risk.
Connecting the power cable
Connecting the power cableConnecting the power cable
Connecting the power cable - To access the terminal board just remove the appliance's rear side-
panel. Loosen the cable gripper and allow the cable to pass through it. Arrange the conductors
so that the earth conductor is the last to detach from its terminal if the cable goes into a state of
faulty traction. Connect the phase
phasephase
phase conductors to the terminals marked “L1”
“L1”“L1”
“L1” and “L2”
“L2”“L2”
“L2”
connecting the neutral
neutral neutral
neutral conductor to the terminal marked "N"
"N""N"
"N" and the earth
earthearth
earth conductor to the
terminal marked with the symbol according to the following lay-out:

TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 6 ___________________________________________________________________________________________
(this electrical connection lay-out is located near the power supply terminal board ). Tighten the
cable gripper and re-fit the rear side-panel of the appliance.
The appliance must be connected to an equipotential system
equipotential systemequipotential system
equipotential system whose efficiency must first be
checked according to current legal regulations.
This connection must be made between different appliances by using the appropriate terminal
marked with the symbol . The equipotential conductor must have a minimum diameter of 2 5
mm
2
The equipotential terminal is at the rear of the appliance.
Safety thermal breaker
Safety thermal breakerSafety thermal breaker
Safety thermal breaker - The appliance has a manually reset safety thermal breaker. It protects
against excessive dangerous over-temperatures which could be accidentally generated inside the
appliance. This device is located on the back of the oven.
5.
5. 5.
5. Use instructions (for the user)
Use instructions (for the user)Use instructions (for the user)
Use instructions (for the user)
This appliance is not intended for use by persons (including children) with reduced phycal
sensory or mental capabilities or lack of experience and knowledge. Unless they have beengiven
supervision or instruction concerning use of appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
For first use we advise you to let the appliance to run load-free at maximum temperature for
about one hour. In this way any unpleasant smells due to thermal insulation and residual work
grease are eliminated. This appliance must be used solely for the purpose for which it was
expressly designed i.e. cooking foods in the oven. Any other use is considered unsuitable.
The appliance can be used: for all oven cooking of deserts pizzas meat fish vegetables as well
as for gratinating and for re-conditioning cooled and frozen foods.
When placing food in the cooking compartment leave a space of at least 40 mm between pans
in order not to over-obstruct air circulation.
Do not use pans with higher than necessary edges: edges are barriers which prevent the
circulation of hot air. Warm up the oven before every cooking operation to obtain maximum
uniformity. Do not salt foods in the cooking compartment.
6.
6. 6.
6. Residual risks (for the user)
Residual risks (for the user)Residual risks (for the user)
Residual risks (for the user)
After a cooking operation open the door cautiously to avoid a violent outflow of heat which
could cause burns.
While the oven is in operation pay attention to the hot zones (marked on the appliance) of its
external surfaces.
Place the machine on a bench or similar support at a height of at least 85 cm from the floor.
The bench or support must be able to support the weight of the machine and house it correctly.
The appliance contains electrical parts and must never be washed with a jet of water or steam.
The appliance is electrically connected: before attempting any cleaning operation cut power to
the appliance.
To prevent incorrect connection of the appliance the relevant electrical and water connections
are marked by identification plates.
Do not use the door handle to move the appliance (the glass panel may break).
When the tilting door is wide open do not use the internal surface to place objects to avoid
damaging permanently the door hinges.

Electric Ovens rev. 0____ _ ___ _ ___ ___ ___ ___ ___ ___ __ ___ _ ___ ___ ___ ___ ___ ___ _ EKF 411 P – EKF 416 P – EKF 464 P
__________________________________________________________________________________________ page 7
7.
7. 7.
7. How to use the control panel
How to use the control panelHow to use the control panel
How to use the control panel
Programming cooking time
Programming cooking timeProgramming cooking time
Programming cooking time - To run the oven turn the programmer knob (Fig. 1) in line with
symbol (continuous operation) or in line with the selected cooking time (up to 120 minutes). In
the second case end of cooking is signalled by the oven switching OFF automatically.
Programming cooking temperature
Programming cooking temperatureProgramming cooking temperature
Programming cooking temperature - Turn the knob of the adjustment thermostat (Fig. 2) in line
with the temperature selected for cooking.
Control thermostat indicator light
Control thermostat indicator lightControl thermostat indicator light
Control thermostat indicator light - The control thermostat orange indicator light goes OFF
whenever the programmed temperature is reached inside the cooking compartment. It lights up
again when the thermostat is tripped to re-establish this temperature.
"End of cooking" programmer indicator light
"End of cooking" programmer indicator light"End of cooking" programmer indicator light
"End of cooking" programmer indicator light - The programmer green indicator light indicate
that the oven is operating and that cooking time is active.
Oven internal light
Oven internal lightOven internal light
Oven internal light - The light is always on when the oven is operating.
To switch off the oven
To switch off the ovenTo switch off the oven
To switch off the oven - Turn OFF the knobs of the "end of cooking" programmer and of the
thermostat. When you have finished using the oven cut out electric power.
8
88
8.
..
. Oven cooking
Oven cookingOven cooking
Oven cooking
For cooking before putting food in warm up the oven to the required temperature. When the
oven reaches the temperature put the food in and check cooking time. Switch off the oven 5
minutes before the theoretical time in order to recover stored heat.
Convection cooking
Convection cookingConvection cooking
Convection cooking - Activate the oven and turn the thermostat knob in line with the required
temperature.
Defreezing
DefreezingDefreezing
Defreezing - Activate the oven and turn the thermostat knob to the OFF position.
9.
9.9.
9. Cooking advice
Cooking adviceCooking advice
Cooking advice
Convection cooking
Convection cookingConvection cooking
Convection cooking - Heat is transferred to the foods by pre-heated air forced to circulate by in
the cooking chamber. The heat quickly and uniformly reaches all parts of the chamber enabling
simultaneous cooking of different types of food (providing they have the same cooking
temperature) placed on the shelves without mixing tastes and smells. Convection cooking is
particularly convenient for rapid defreezing and for sterilising preserves and drying mushrooms
and fruit.
Fig. 1
Fig. 1Fig. 1
Fig. 1
Fig. 2
Fig. 2Fig. 2
Fig. 2
-Programmer indicator light
-Temperature indicator light

TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 8 ___________________________________________________________________________________________
Cooking desserts
Cooking dessertsCooking desserts
Cooking desserts - Desserts require a very high temperature (usually from 150 to 200°C) and a
pre-heated oven (about ten minutes). The oven door must not be opened until at least 3/4 of the
cooking time has elapsed. Whipped dough must be difficult to detach from a spoon because
excessive fluidity would prolong cooking time to no avail.
Cooking meat
Cooking meatCooking meat
Cooking meat - Meat to be cooked should weight at least 1 Kg to prevent it drying too much.
Very tender red meats to be cooked rare which must be cooked on the outside to keep all their
gravy require short cooking time at high temperature (200-250°C). The gravy ingredients must
be placed immediately in the pan only if the cooking temperature is brief otherwise they should
be added during the last half-hour. You can check the degree of cooking by squashing the meat
with a spoon: if the meat does not yield it is correctly cooked. For roast beef and fillet which
must remain pink inside cooking time must be very brief. Meats may be placed on a plate
suitable for oven cooking or directly on the grill under which you should place a tray to collect
the gravy. When cooking has finished we advise you to wait for 15 minutes before cutting the
meat so that the gravy does not come out. Before being served the dishes may be kept hot in
the oven at minimum temperature.
10.
10. 10.
10. Routine cleaning and maintenance
Routine cleaning and maintenanceRoutine cleaning and maintenance
Routine cleaning and maintenance
(WARNING:
(WARNING:(WARNING:
(WARNING: Cut power to the appliance
Cut power to the appliance Cut power to the appliance
Cut power to the appliance before every operation)
before every operation)before every operation)
before every operation)
General cleaning
General cleaningGeneral cleaning
General cleaning - Clean the oven when it is cold. Wash enamelled parts with lukewarm water
and soap do not use abrasive products steel wool or acids which could ruin them. To clean the
steel parts do not use products containing chlorine (sodium hypochlorite hydrochloric acid etc)
even if diluted. Use specific off-the-shelf products or a little hot vinegar. Rinse thoroughly with
water and dry with a soft cloth. Clean the glass door of the oven with hot water only and do not
use rough cloths. Do not allow foods (especially acid foods such as salt vinegar lemon etc) to
stagnate on the stainless steel parts because they could deteriorate. Do not wash the appliance
with direct jets of water because if water enters this could limit the appliance's safety. Do not
use corrosive substances (e.g. hydrochloric acid) to clean the oven' s support bench.
Cleaning the oven
Cleaning the ovenCleaning the oven
Cleaning the oven - It is good practice to clean the oven interior at the end of every day of duty.
In this way it will be easier to remove cooking residues preventing them from burning when the
oven is next used. Clean it accurately with hot water and soap or with the appropriate off-the-
shelf products.
Cleaning the oven door
Cleaning the oven doorCleaning the oven door
Cleaning the oven door - To clean the oven door thoroughly proceed as follows:
-fully open the door;
-attach the rings “A” onto the hinge seats (Fig. 3);
-lift the door gently and withdraw it (Fig. 4).
Fig. 3
Fig. 3Fig. 3
Fig. 3
Fig. 4
Fig. 4Fig. 4
Fig. 4
A

Electric Ovens rev. 0____ _ ___ _ ___ ___ ___ ___ ___ ___ __ ___ _ ___ ___ ___ ___ ___ ___ _ EKF 411 P – EKF 416 P – EKF 464 P
__________________________________________________________________________________________ page 9
Replacing oven lamp
Replacing oven lampReplacing oven lamp
Replacing oven lamp - Electrically switch off the appliance; unscrew the protective glass cap;
unscrew the lamp and replace it with another lamp suitable for high temperatures (300°C) with
the following characteristics:
-Voltage 230/240 V
-Power 15 W
-Fitting E 14
Refit the glass cap and power up the appliance.
11
1111
11.
..
. Technical
Technical Technical
Technical assistance
assistanceassistance
assistance
Before leaving the factory the appliance was completely regulated and tested by expert
specialised personnel to guarantee the best operating results.
All repairs and settings must be performed with utmost care and attention respecting national
safety regulations in force. Always contact your retailer or our nearest Service Centre giving
details of the problem the appliance model and the serial number (on the rating plate on the
rear panel).
For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the
cover or going to www.tecnoeka.com
www.tecnoeka.comwww.tecnoeka.com
www.tecnoeka.com.
1
11
12
22
2. Informations to the consumers
. Informations to the consumers. Informations to the consumers
. Informations to the consumers
Further to Directive 2002/96/EC the symbol of the crossed rubbish skip on
the appliance means that at the end of its life the product must be disposed
of separately from the other rubbish. The user must hand the appliance to a
specialised waste collection centre for electric and electronic equipment.
The separate collection of the rubbish and subsequent treatment recovery and disposal
help to
produce other equipment using recycled materials reducing the negative effects on the
environment and public health which would be caused by incorrect management of the
rubbish.
Should the user dispose of the product abusively administrative sanctions would be applied.

TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 10 ___________________________________________________________________________________________
1
11
13
33
3.
. .
. Wiring layout
Wiring layoutWiring layout
Wiring layout
Key
KeyKey
Key
M
CLIP FOR POWER SUPPLY
Pr
TIMER PROGRAMMER
MI
DOOR MICRO
-
SWITCH
T1
SAFETY THERMOSTAT
T2
CONTROL THERMOSTAT
R1
-
R3
CIRCULAR HEATING ELEMENT
V1
RADIAL MOTOR
-
VENTIL
ATOR
V2
TANGENTIAL MOTOR
-
VENTILATOR
B1
-
B2
CONTACTORS COIL
L
LIGHTING BULB
S1
PROGRAMMER LIGHT BULB
S2
THERMOSTAT LIGHT BULB
C
CONDENSER
IM
ROTATION INVERTER

Electric Ovens rev. 0____ _ ___ _ ___ ___ ___ ___ ___ ___ __ ___ _ ___ ___ ___ ___ ___ ___ _ EKF 411 P – EKF 416 P – EKF 464 P
__________________________________________________________________________________________ page 11
14. The Warranty
14. The Warranty14. The Warranty
14. The Warranty
Your appliance is covered by warranty. The seller will replace or repair (and his decision will be final) free
of charge for the customer only those parts that are defective due to a manufacturing fault on condition
that under penalty of forfeiture:
−for domestic equipment the customer notifies the fault within two months from the date when
he/she discovered it and anyway within 2 years form the date of purchase;
−for professional equipment the customer notifies the fault within 8 days from the date when
he/she discovered it and anyway within 12 months from the date of purchase
enclosing a copy of the invoice or receipt proving the purchase.
Apart from the case when the customer cannot produce the invoice or receipt proving the purchase or
when the above-mentioned terms are not complied with the warranty
warranty warranty
warranty is expressly excluded
is expressly excluded is expressly excluded
is expressly excluded in the
following cases:
1) faults or breakage caused by the transport;
2) wrong or incorrect installation of the product (for instance because of insufficient draught of the
flue or exhausts) in light of the instructions given in the user’s handbook supplied with the
product;
3) inadequate or abnormal electrical hydraulic and/or gas supplies;
4) carelessness negligence or incompetence in using the product in light of the instructions given in
the user’s handbook supplied with the product;
5) use of the product for uses different from the one for which it was built or anyway in a manner
not compliant with the instructions given in the user’s handbook supplied with the product;
6) tampering with the product;
7) adjustments and/or maintenance and/or repairs carried out by unauthorised personnel and/or with
non original spare parts;
8) inadequate or careless maintenance of the product in contrast with the user’s handbook supplied
with the product;
9) damages caused by fire natural disasters and accident as well as by any cause not attributable to
TECNOEKA SRL.
In addition painted or enamelled parts knobs handles mobile or removal plastic parts light globes glass
parts refractory stones electronic parts and any accessory parts and transport from the consumers final
user and/or purchases location to Tecnoeka srl and vice versa are excluded from the warranty.
Replacement costs of the oven and relative installation expenses are also excluded from the warranty.
TECNOEKA SRL cannot be held responsible for any damages either direct or indirect caused by the
product breaking down or following its non-use.
Any repairs carried out during the warranty do not cause said warranty to be extended or renewed.
Nobody is authorised to modify the terms and conditions of the warranty or to issue new verbal or written
warranties. Any dispute shall be settled by the competent Court in Padua.
Warning for the Buyer:
Warning for the Buyer:Warning for the Buyer:
Warning for the Buyer:
1. the cooking appliance is designed only for cooking purposes while the heating appliance is
designed only for heating domestic environments;
2. TECNOEKA S.r.l. does not install the appliances; the seller shall be responsible for any installation
carried out;
3. TECNOEKA S.r.l. cannot be held responsible for any damages either direct or indirect to people
pets or property caused by the appliance breaking down or following its non-use.
The Manufacturer cannot be held responsible for any inaccuracies due to misprints or mistakes in copying
in this handbook. The Manufacturer reserves the right to modify the products as he deems fit also in the
interest of the user without affecting the vital characteristics of functionality and safety.
15. Availability and supply of spare parts
15. Availability and supply of spare parts15. Availability and supply of spare parts
15. Availability and supply of spare parts
TECNOEKA SRL keeps and ensures the availability of spare parts for a maximum of 24 months from the
date of the sales invoice of the finished product to the dealer. Availability cannot be guaranteed after said
period.