Teison EDW Series User manual

DC 40KW
TS-EDW40-001

Product overview
EDW series intelligent DC charging station is a kind of electric device that
adopts professional power technology to provide efficient, safe and stable
DC power for electric vehicles, and provides a friendly man-machine opera-
tion interface with corresponding control, billing, communication and safety
protection functions. It can be connected to the background server, perfectly
compatible with the OCPP standard protocol to achieve convenient func-
tions such as mobile phone APP control, charging time scheduling and
online payment, etc. Diversified communication methods are available for
your taking option from Ethernet, WIFI or 3/4G.

1
1.Technical Parameter
Item No.
Dimension
Weight
Screen Material
Shell Material
Input Overvoltage Protection
Input Undervoltage Protection
Output Overvoltage Protection
484-500Vac
260-276Vac
DC260V～850V
IInput Line
Voltage
Current
Frequency
IP Protection Level
Operating Temperature
Relative Humidity
Altitude
Cooling Method
Network Gateway
Charging Mode
Standby Power Consumption
Standard
Installation Method
Certicate
Measure Accuracy
Force-air Cooling
Ethernet
RFID/APP
25W
IEC-62196-2;EN61851
Wall-mount/Floor-stand
CE
0.5
IP55
－25℃～50℃
＜95％
3P+N+PE
AC 380V
≤66A
45～65HZ
TS-EDW40-001
770mm X 580mm X 265mm
85KG
LCD
Solid Metal
AC Input
Voltage
Current 100A
DC Output
Safety Protection Function
DC150～750V
≤2000m
(Lower the output power when altitude ＞2000m）

2
2.Instruction
2.1 Wifi connection
Over Temperature Protection
Short Circuit Protection
Emergency Stop Protection
Leakage Protection
Lightning Protection
Yes
Yes
Type A
Level 2
＞50℃: output power will be reduced
＞75℃: charging station will be shutdown
Press the settings button in the upper right corner
Choose login with “User: Administrator”, password: 39935069

3
Choose “General Information”
Open “Android Virtual Keys”
Press the button in the red box

4
Click the button in the red box, to enter the menu bar
Select ‘Setting’ to enter
Connect “WIFI”

5
2.2 OCPP platform connection
Press “Charging Station”to return the charging systerm and close android Virtual
Keys
Press “Charging Settings”
Choose “Charging Station Management System”

6
Enter the corresponding URL to the platform, and the last section is the char-
ger’s ID number
You can exit after adding the corresponding ID number in the ‘Device Infor-
mation’ option
Successful login to the platform if the cloud with ‘√ ’

7
2.3 Charging Mode and Method
APP/RFID Mode: support QR code scanning and RFID prepaid charging mode
APP/RFID Mode Operation Diagram
Plug&Charge Mode Operation Diagram
Plug&Charge: no billing mode

8
Teison APP operation diagram shown as below:

9
3.Installation
Wall mounted installation
1. Select the appropriate
installation position and
punch the screw hole position
according to the mounting
plate mark.
4. Hang the charging pile on
the mounting plate.
5. Tighten the four M6 bolts on
the left and right of the mounting
plate to prevent the equipment
from moving from left to right.
6. After installation, connect
the incoming line (3 * 16mm
+2 * 10mm ) to the power
supply.
2. Knock the expansion
pipe into the hole
3. Use M10/M12 bolts to
horizontally fix the mounting
plate to the wall.
2
2

Column installation
10
1. Install the column in place
4. Tighten the four M6 bolts on
the left and right of the mounting
plate to prevent the equipment
from moving from left to right.
2. Use M10/M12 bolts to fix the
mounting plate on the column
(holes are reserved on the
column).
3. Hang the charging pile
on the mounting plate.
5. After installation, connect the incoming line (3 * 16mm
+2 * 10mm ) to the power supply.
2
2