teko Astra-712/4 User manual

1
Scientific & Development Center TEKO
CONTROL PANEL
Operation Manual

2

3
Content
1 Function............................................................................................................................................5
2 Delivery Set..........................................................................................................................................5
3 Labeling............................................................................................................................................6
4 Safety Instructions ............................................................................................................................6
5 Device Key Data and Properties
5.1 Key Data.....................................................................................................................................7
5.2 Properties ...................................................................................................................................8
6 Specifications....................................................................................................................................9
7 Structure.........................................................................................................................................12
8 Terms and Definitions.....................................................................................................................14
9 Information Capacity.......................................................................................................................16
10 Installation ....................................................................................................................................23
11 Default Settings ............................................................................................................................25
12 Setting Operating Mode by Jumpers.............................................................................................26
13 Setting Operating Mode via PC.....................................................................................................28
14 TM Registration and Deletion........................................................................................................33
15 Extension Line Connections..........................................................................................................35
16 Pre-Starting Procedure. Operability Test......................................................................................36
17 Control Panel Application
17.1 Intrusion Detection Application..............................................................................................37
17.2 Fire Detection Application .....................................................................................................38
18 Firmware Update ..........................................................................................................................39
19 Maintenance.................................................................................................................................41
20 EC Conformity Declarations..........................................................................................................41
21 Recycling......................................................................................................................................42
22 Warranty Terms............................................................................................................................42

4
The present operation manual is intended for description of operating principles, proper use, storage
and technical maintenance of control panel Astra-712/4 and Astra-712/8 (hereinafter Control panel).
List of abbreviations:
CP –Control Panel
BAT –Rechargeable Battery
TRC - Wireless Transmitter Astra-TRC or Astra-TRC ver. M
TM –Touch Memory Identifier
Control button –Switch
LED «Zone-x»–Zone-x LED indicator, where x - is zone number
SA –Sound Alerter
BZ –Built-in Buzzer
LA –Light Alerter
SC –Short Circuit
LIN –Extension Line
TRB–Wireless Transmitter of Observer II System
RVB –Wireless Receiver of Observer II System
RVC ver. TM –Wireless Receiver Astra-RVC version TM
PC –personal computer
FW - Firmware
CSP–central surveillance post
NTS –Notification Transmitting System
Zone –signaling system loop

5
1 Function
The control panel provides for:
- Zone supervision with active intrusion- or fire-type detectors;
- SA and LA control;
- transmitting of alarm signals to CSP via relay outputs;
- Voltage supply for active detectors and other units.
Astra-712/4 and Astra-712/8 differ from each other by the following parameters:
Astra-712/4
Astra-712/8
Number of zones:
4
8
Number of indicators:
5
9
2 Delivery Set
Astra-712/4
Astra-712/8
Control panel
1 pcs
1 pcs
Push button switch
1 pcs
1 pcs
TM reader Astra-TM
1 pcs
1 pcs
Fuse 179120.016 IP 160 mA
1 pcs
1 pcs
Screw 3.9x32
4 pcs
4 pcs
Dowel 6x30
4 pcs
4 pcs
Operating manual
1 copy
1 copy

6
3 Labeling
3.1 The label at the bottom of the control panel housing contains the following information:
- trademark of the Manufacturer;
- abbreviated name of the device;
- firmware version;
- month and year of manufacture (last two digits);
- ingress protection level;
- conformity mark (if certificate is available);
- serial number;
- bar-code duplicating the textual information.
3.2 The label inside the control panel cover contains the following information:
- device name;
- power supply parameters;
- function of jumpers used for setting operating modes;
- information about zone status.
4 Safety Instructions
4.1 While operating the device one should observe «Maintenance and safety rules for electric
installations up to 1000 V».
4.2 Electric terminals used for transformer power supply are considered dangerous voltage source.
4.3 Assembling-disassembling of the device should be performed with power switched off.

7
5 Device Key Data and Properties
5.1 Key Data
5.1.1 Control panel provides for arming/disarming the system by 2 methods:
- by means of TM identifiers or devices forming TM code, for instance, Astra-RVC (TRC is used as
a ТМ identifier);
- by means of control button or other devices having output with two constant states.
5.1.2 The control panel provides for two types of zones: «Intrusion»and «Fire».
Control panel with intrusion type zones provides for zone resistance supervision by two fixed val-
ues «Norm», «Violation». «Failure»state is not identified.
Control panel with fire type zones provides for zone resistance supervision by four fixed values
«Norm», «Violation», «Failure», «Warning».
The following devices can be connected to the control panel Zone:
Detectors, control panel NO/NC relay outputs of «dry contact»-type;
Fire-type detectors powered via Zone with minimal power supply voltage of 9 V, and maximal re-
sidual voltage on an activated detector of up to 6 V.
5.1.3 Control panel provides for sending an alarm message to CSP at complete cutoff of main and
backup power supply.
5.1.4 ARM_out terminal of open collector type is intended for controlling peripheral equipment.
5.1.5 Control panel is designed for continuous 24-hours operation.
5.1.6 Control panel is not intended for application under exposure of corrosive environment, dust,
water, as well as in fire dangerous areas. Device is not intended for application as a part of Automated
Fire-Fighting Control Systems.

8
5.1.7 Control panel is protected against overheating of the transformer. Thermal protection actuat-
ing temperature is 85+10°C
5.2 Properties
Flexibility in operating modes setting.
Setting operating mode by means of jumpers or via PC.
Easy to configure.
Standard operating tactics and ways of notification transfer.
Conspicuous intelligible two-color LED indication.
Extension line for connection of peripheral Astra devices–devices of notification transfer (via
radio channel 433,92 MHz, GSMchannel, PC, etc), functional units (relay modules, indication modules).
Power output for detectors and outer load DC supply (up to 0,75A).
Overload protection, and protection against malfunctions in zone circuit, power circuit, battery
circuit.
Safety fuse-switch 220 V.
Possibility to install Accumulator battery with higher capacity (7.2 A*h) providing long-term power
reservation of the whole complex devices connected to the control panel.
Additional terminal for load connection directly to accumulator battery (for instance, siren or ra-
dio channel transmitter).
Permanent development of device firmware and upgradeability during installation and operation.

9
6 Specifications
Number of zones connected to the device:
- Astra-712/4..................................................................................................................................4
- Astra-712/8..................................................................................................................................8
Number of relay outputs ................................................................................................................3
Power supply from:
- AC network with frequency (50 ± 1) Hz, V .......................................................................220
22
33


- BAT 7,2 A/h, V.................................................................................................................... 12
2
2


Power consumption from AC network in stand-by mode
(without regard to outer load) and in alarm mode, Wt, max.........................................................15
Current consumption from BAT, mA, max:
- Astra-712/4:
In Stand-by mode......................................................................................................................150
In «Alarm»mode.......................................................................................................................170
- Astra-712/8:
In Stand-by mode......................................................................................................................180
In «Alarm»mode.......................................................................................................................200
Peak Output Load Current:
- for SA, А, max:
а) with BAT (SND and «BAT_out»terminals) .............................................................................1,5
б) without BAT (SND and «+12V» terminals)..............................................................................0,1
- for LA (LHT and «+12V» terminals), mA, max ...........................................................................50
- control («ARM_out»and «+12V terminals»), мА, max...............................................................50

10
- relay («Relay 1», «Relay 2», «Relay 2» terminals) with maximal switching
voltage 100V, mA, max..............................................................................................................100
«+12V»output loading current, mA......................................................................................750+50
«+12V»output short-circuit current, mA, max..............................................................................40
«+12V»output voltage ripple, mV, max .....................................................................................100
BAT-powered operating time in stand-by mode (without
outer load powering), h, min
- Astra-712/4................................................................................................................................48
- Astra-712/8................................................................................................................................36
Battery discharge indication voltage
(without mains voltage), V..................................................................................................11,5±0,3
Battery voltage whereby device is switched to «sleep»mode
(without mains voltage), V..................................................................................................10,5±0,3
Battery voltage whereby device is turned OFF
(without mains voltage), V..................................................................................................10,0±0,3
Zones Parameters («Zone-x», «GND» terminals):
Zone terminal voltage in stand-by mode, V...................................................................from 9 to 14
Zone short circuit current, mA, max .............................................................................................20
Zone Integration time, ms:
- intrusion ..............................................................................................................................70+10
- fire.....................................................................................................................................300+30
Zone wiring resistance (not including remote element), Ohm, max:
- intrusion ..................................................................................................................................220
- fire...........................................................................................................................................150