TEKTELIC Communications Kona Micro Gateway User manual

KONA Micro Gateway
Quick Start Guide

Note:
Powering up the Gateway
This KONA Micro gateway supports one external LoRa antenna, copper Ethernet backhaul, and optional
3G/4G wireless backhaul. All Gateway models are powered by an AC-DC power adapter and may
optionally have an internal backup battery provisioned.
Ethernet
Port
LED
RF LoRa
Antenna Port
DC Power
Port
What’s In The Box
The following equipment is
provided for installing &
commissioning the KONA Micro
Gateway on TEKTELIC Network
Server:
Please refer to setup video for further instructions on how to assemble the accessories:
https://www.youtube.com/watch?v=_V3e2nn2wrI
RF LoRa Antenna
Ethernet Cord
DC Power Cord
KONA Micro Gateway
Network
Server
Internet
Router

Configuration & Activation
Commission the Gateway using LeapX Application
To use LeapX, you will need a TEKTELIC Account. If you don’t have an account already, please
raise a ticket in our support portal support.tektelic.com and our support team will create an
account for you.
To install LeapX Application on your Smart Device, please search for “TEKTELIC LeapX” on the
Google Play Store or the Apple App Store. Once the app is installed, log in to the app using the
username and password of your TEKTELIC account. Then follow the in-app instructions online
Note:
Once the Gateway shows "Online" you are ready to add
sensors to your network

Gateway Troubleshooting
KONA Micro LED States
Note:
If you have questions about this Gateway visit the TEKTELIC Support
Portal at support.tektelic.com for access to our knowledge base.