Tektronix 067-0832-01 User manual

Tektron~
COMMITTED
TO
EXCELLENCE.
070-3299-00
FIRST
PRINTING
-
JANUARY
1980
SEMICONDUCTOR
TEST SYSTEMS
DELAY
STANDARD
UNIT
067-0832-01
Instruction Manual

WARRANTY
Tektronix
warrants that this product, excluding customer-supplied
equipment, is free from defects in materials and workmanship. The
warranty period is ninety (90) days from the date of installation or
one-hundred
twenty
(120) days from the date of shipment,
whichever is shorter.
Tektronix
will, at its option, repair
or
replace
those components that
Tektronix
determines
to
be defective within
the warranty period. CRTsare warranted
for
one (1) year. Duringthe
nine (9)
months
following
expiration of
the
product warranty,
Tektronix will replace defective CRTs at no charge
for
the material.
In
the
forty-eight (48)
contiguous
United States, the District of
Columbia, and in other areas where Tektronix normally offers on-
site service forthis product,
Tektronix
will providethis service at no
charge during the
product
warranty period described above. In
areas whereTektronixdoes notofferon-siteservice
for
this product,
warranty service will be provided at nocharge if
the
componentsare
returned, freight prepaid,
to
a service center designated by
Tektronix.
Tektronix
may use the original vendor's service organization
to
service any product that is supplied but not manufactured by
Tektronix.
Tektronix is not obligated
to
furnish service under this warranty
a.
to
repair damage resulting from attempts by personnel other
than Tektronix representatives
to
install, repair,
or
servicethe
product;
b.
to
repair damage resulting from
improper
use or from
connecting the product
to
incompatible equipment;
c.
if personnel other than
Tektronix
representatives
modify
the
hardware
or
software.
There is no
implied
warranty of fitness
for
a particular purpose.
Tektronix
is not liable
for
consequential damages.
Copyright @
1980
by Tektronix, Inc.
All
rights reserved. Contents of this publication may
not
be reproduced
in
any form
without
the
permission of Tektronix, Inc.
Products
of
Tektronix, Inc. and its subsidiaries are covered by U.S. and foreign patents
and/or
pending patents.
TEKTRONIX, TEK, SCOPE-MOBILE, TELEQUIPMENT, and
i!l
are registered trademarks
of
Tektronix,
Inc. Printed
in
U.S.A. Specification and price change privileges are reserved.

(
@
DELAY STANDARD UNIT
The Delay Standard Unit (DSU) provides pulses for time correction software packages such as T.l.M.E.
and SKEWCAL. The DSU accepts an input pulse and splits it into three parts. The amplitude of each
resulting pulse is one third that of the input. If the input is positive, NORM is positive and INV is nega-
tive. If
the input is negative, the inverse is true. Due to exacting design characteristics, NORM and INV
occur at the same time. REF OUT has the same amplitude and polarity as NORM but occurs approxi-
mately 18 ns later. The DSU allows insertion of delay lines with known, accurate delay times. Therefore,
any two pulses can be measured and compared to the known delay. For example, when used with S-3200
Systems, the difference between the measured delay and the known delay represents the amount of skew
in the system's hardware. This skew data is stored in an array and used to correct all system time mea-
surements. The DSU can be used to provide two synchronous pulses of opposite polarity or two identical
pulses
with a known delay between them.
Front/Top View Delay Standard Unit
1

Delay Standard Unit
Connector
PULSE
IN
DC
IN
GROUND
NORM
INV
REF
OUT
DELAY
STANDARD
UNIT
CONNECTORS
Specification
Impedance
-
50
Q
Pulse
Amplitude
-
±12
V
max.
DC
Level -± 6 V
max.
Input
Voltage -
±4.06
V max.
-
1.015
x
output
voltage
Current
-
450
mA
Accuracy·
-
±0.1
%
Impedance
-
50Q
Amplitude. -
±4
V max.
Skew
to
INV -
0.18
ps
1
Skew
to
REF
OUT
-18 ns
±2
ns
Impedance
-
50
Q
Amplitude
-
±4
V max.
Skew
to
NORM -0.18 ps
Skew
to
REF
OUT
-
18
ns
±2
ns
Impedance
-
50
Q
Amplitude
-
±4
V
max.
Skew
to
NORM -18 ns
±2
ns
Skew
to
INV -
18
ns
±2
ns
Description
This
input
accepts
the
external
signal.
DC
IN
accepts
an
input
voltage
that
can
correct
pulse
for
offsets.
External
DC
ground
connection.
Pulse
output
with
the
same
polarity
as
the
input
pulse,
one
third
in
amplitude.
Pulse
output
with
the
inverted
polarity
of
the
input
pulse,
one
third
in
amplitude.
Pulse
output
with
the
same
polarity
and
emplitude
as NORM,
delayed
approxi-
mately
18 ns.
CHANNEL
A
and
CHANNEL
B have
the
following
inputs
and
outputs:
2
IN
DELAY
1 }
DELAY
2
OUT
Impedance
-
50
Q
Skew
to
OUT
- 0 ns
to
15
ns
Accuracy
-
±0.4
ps
Impedance
-
50
Q
Skew
to
IN
-0 ns
to
15 ns
Accuracy
-
±
0.4
ns
Channel
input
connected
internally
to
DELAY
1.
External
fixtures
can be
added
between
DELAY
1
and
DELAY
2
to
increase
delay
time.
Channel
output
connected
internally
to
DELAY
2.
@

@
PARTS ORDERING
INFORMATION
Replacement parts are available from
or
through
your
local
Tektronix,
Inc. Field Office
or
representative.
Changes to
Tektronix
instruments are sometimes made to
accommodate
improved
components
as
they become available,
and to give you the benefit
of
the latest
circuit
improvements
developed in
our
engineering department.
It
is therefore
important, when
ordering
parts, to include the
following
information
in
your
order: Part number,
instrument
type
or
number, serial number, and
modification
number
if
applicable.
If
a
part
you have ordered has been replaced with a new
or
improved part,
your
local
Tektronix,
Inc. Field
Office
or
representative
will
contact
you
concerning
any change in part
number.
Change information, if any, is located at the rear
of
this
manual.
SPECIAL NOTES
AND
SYMBOLS
XOOO
Part
first
added at this serial
number
oox
Part removed after this serial
number
FIGURE
AND
INDEX NUMBERS
Items in
this
section are referenced by
figure
and index
numbers to the illustrations.
Delay Standard
Unit
INDENTATION
SYSTEM
This
mechanical parts list
is
indented to
indicate
item
relationships.
Following
is
an
example
of
the
indentation
system
used in the description column.
1
2
3 4
5
Name
&
Description
Assembly
and/or
Component
Attaching
parts
for
Assembly
and/or
Component
*
---
---
Detail
Part
of
Assembly
and/or
Component
Attaching
parts
for
Detail
Part
*
---
---
Parts
of
Detail
Part
Attaching
parts
for
Parts
of
Detail
Part
*
--- ---
Attaching
Parts always appear
in
the same
indentation
as
the item it mounts,
while
the detail parts are indented
to
the right.
Indented items are
part
of, and included with, the
next
higher
indentation. The separation symbol ---* - - - indicates the end
of
attaching parts.
Attaching parts must be purchased separately, unless otherwise
specified.
ITEM NAME
In the Parts List,
an
Item Name is separated
from
the
description
by
a
colon
(:). Because
of
space limitations, an Item
Name may sometimes appear
as
incomplete. For
further
Item
Name identification, the U.S. Federal Cataloging
Handbook
H6-1
can be utilized where possible.
ABBREVIATIONS
INCH ELCTRN ELECTRON
IN
INCH
SE
SINGLE END
NUMBER SIZE ELEC ELECTRICAL
'NCAND
INCANDESCENT SECT SECTION
ACTA
ACTUATOR
ELCTLT
ELECTROLYTIC INSUL INSULATOR SEMICOND
SEMICONDUCTOR
ADPTR ADAPTER ELEM ELEMENT
INTL
INTERNAL SHLD SHIELD
ALIGN
ALIGNMENT
EPL ELECTRICAL PARTS LIST LPHLDR LAMPHOLDER SHLDR SHOULDERED
AL
ALUMINUM
EQPT EQUIPMENT
MACH
MACHINE
SKT SOCKET
ASSEM ASSEMBLED EXT EXTERNAL MECH
MECHANICAL
SL SLIDE
ASSY ASSEMBLY FIL FILLISTER
HEAD
MTG
MOUNTING
SLFLKG
SELF-LOCKING
ATTEN ATTENUATOR FLEX FLEXIBLE NIP NIPPLE SLVG SLEEVING
AWG AMERICAN WIRE
GAGE
FLH FLAT
HEAD
NON WIRE
NOT
WIRE
WOUND
SPR SPRING
BO
BOARD FLTR FILTER OBD ORDER BY DESCRIPTION SQ SQUARE
BRKT BRACKET
FR
FRAME
or
FRONT
OD OUTSIDE DIAMETER SST STAINLESS STEEL
BRS BRASS FSTNR FASTENER OVH OVAL HEAD STL STEEL
BRZ BRONZE FT FOOT
PH
BRZ PHOSPHOR BRONZE
SW
SWITCH
BSHG BUSHING FXD FIXED
PL
PLAIN
or
PLATE T TUBE
CAB
CABINET
GSKT GASKET PLSTC PLASTIC TERM
TERMINAL
CAP CAPACITOR HDL HANDLE
PN
PART NUMBER THO THREAD
CER CERAMIC HEX HEXAGON PNH PAN HEAD THK
THICK
CHAS CHASSIS HEX HD
HEXAGONAL
HEAD
PWR
POWER TNSN TENSION
CKT
CIRCUIT HEX SOC
HEXAGONAL
SOCKET RCPT RECEPTACLE TPG
TAPPING
COMP COMPOSITION HLCPS HELICAL COMPRESSION
RES
RESISTOR TRH TRUSS
HEAD
CONN
CONNECTOR HLEXT HELICAL EXTENSION RGD RIGID
v
VOLTAGE
cov
COVER HV HIGH
VOLTAGE
RLF RELIEF VAR VARIABLE
CPLG
COUPLING
IC INTEGRATED
CIRCUIT
RTNR RETAINER
WI
WITH
CRT
CATHODE
RAY TUBE ID INSIDE DIAMETER SCH SOCKET HEAD WSHR WASHER
DEG DEGREE IDENT
IDENTIFICATION
SCOPE OSCILLOSCOPE XFMR TRANSFORMER
DWR DRAWER IMPLR IMPELLER SCR SCREW XSTR TRANSISTOR
3

Replaceable
Parts-Delay
Standard Unit
CROSS
INDEX-MFR.
CODE
NUMBER
TO
MANUFACTURER
Mfr.
Code
4
24655
24931
58474
59730
72982
73743
80009
83385
89663
91260
91637
98335
Manufacturer
GENERAL
RADIO
CO.
SPECIALTY
CONNECTOR
CO., INC.
SUPERIOR
ELECTRIC
CO.
THOMAS
AND
BETTS
COMPANY
ERIE
TECHNOLOGICAL
PRODUCTS,
INC.
FISCHER
SPECIAL
MFG.
CO.
TEKTRONIX,
INC.
CENTRAL
SCREW
CO.
REESE,
J.
RAMSEY,
INC.
CONNOR
SPRING
AND
MFG.
CO.
DALE
ELECTRONICS,
INC.
WEATHERFORD
ENGINEERING
AND
MFG.
COMPANY
Address
300
BAKER
AVE.
3560
MADISON
AVE.
383
MIDDLE
ST.
36
BUTLER
ST.
644
W.
12TH
ST.
446
MORGAN
ST.
P 0
BOX
500
2530
CRESCENT
DR.
71
MURRAY
STREET
1729
JUNCTION
AVE.
P.
O.
BOX
609
City,
State,
Zip
CONCORD,
MA
01742
INDIANAPOLIS,
IN
46227
BRISTOL,
CT
06010
ELIZABETH,
NJ
07207
ERIE
,
PA
16512
CINCINNATI,
OH
45206
BEAVERTON,
OR
97077
BROADVIEW,
IL 60153
NEW
YORK,
NY
10007
SAN
JOSE,
CA
95112
COLUMBUS,
NE
68601
WEATHERFORD,
TX
76086
@

Replaceable Electrical Parts-Delay Standard Unit
Tektronix
Serial/Model No.
Mfr
Ckt No.
Part No. Eff
Dscont
Name & Description
Code Mfr Part Number
067-0832-01
FIXTURE,CAL:DELAY STANDARD
80009
067-0832-01
670-5246-01
CKT BOARD ASSY:PULSE INVERTER
80009 670-5246-01
C99
·283-0253-00
CAP.,FXD,CER DI:lOUF,10%,50V 72982
Al5BF9ALW5R0103K
ClOO
283-0177-00
CAP.,FXD,CER DI:lUF,+80-20%,25V 72982 8131N039 E 105Z
C200
283-0238-00
CAP.,FXD,CER DI:0.01UF,10%,50V 72982 8121N075X7R0103K
C300
283-0177-00
CAP.,FXD,CER DI:lUF,+80-20%,25V
72982 8131N039 E 105Z
C400
283-0238-00
CAP.,FXD,CER DI:0.01UF,10%,50V 72982 8121N075X7R0103K
RlOO
321-0039-00
RES.,FXD,FILM:24.9
OHM, 1%, 0 .125W 91637 MFF1816G24R90F
R200
321-0039-00
RES.,FXD,FILM:24.9
OHM, 1%,0.125W 91637 MFF1816G24R90F
R300
321-0039-00
RES.,FXD,FILM:24.9
OHM, 1% ,0 .125W 91637 MFF1816G24R90F
R400
321-0039-00
RES.,FXD,FILM:24.9 OHM,1%,0.125W 91637 MFF1816G24R90F
TlOO
120-0445-00
XFMR,TOROID:8
TURNS,BIFILAR 80009
120-0445-00
T200
120-0445-00
XFMR,TOROID:8
TURNS,BIFILAR 80009
120-0445-00
T300
120-0445-00
XFMR,TOROID:8
TURNS,BIFILAR 80009
120-0445-00
T400
120-0445-00
XFMR,TOROID:8
TURNS,BIFILAR 80009
120-0445-00
@ 5

Replaceable Mechanical
Parts-Delay
Standard Unit
Fig.
&
Index
Tektronix Serial/
Model
No.
Mfr
No.
Part
No.
Eff
Dscont
Qty
1 2 3 4 5
Name
&
Description
Code
Mfr
Part
Number
1-
067-0832-01
1
FIXTURE,CAL:DELAY
STANDARD
80009
067-0832-01
-1
380-0355-01
2
HSG,HALF,WRAPAR:PAINTED
80009
380-0355-01
(ATTACHING
PARTS)
-2
211-0007-00
8
SCREW,MACHINE:4-40
X
0.188
INCH,PNH
STL
83385
OBD
- - - * - - -
-3
200-0278-04
1
PANEL,CABINET:REAR
80009
200-0278-04
-4
348-0049-00
4 GROMMET,PLASTIC:BLACK,U-SHAPE,1.562
SQ
80009
348-0049-00
-5
175-2109-00
1
CABLE
ASSY,RF:50
OHM
COAX,180.0 L 80009
175-2109-00
-6
343-0549-00
3 . STRAP,TIEDOWN:0.091 W X
3.62
INCH
LONG
59730
TY23M
-7
132-0116-00
1 . TRANSITION,INR:RG-58 24655
0874-6279
-8
131-0889-00
1 LEAD,ELECTRICAL:STRD,22 AWG,40KVDC,26.5 L 80009
131-0889-00
-9
175-2089-00
4 .
CABLE
ASSY,RF:50
OHM
COAX,8.0 L 80009
175-2089-00
-----
-----
(EACH
CABLE
ASSEMBLY
INCLUDES)
-10
132-0002-00
1
SHELL,ELEC
CONN:GENL
RADIO
24655
0874-0603
-11
132-0001-00
1 NUT,COUPLING:0.75-27 X
0.814
OD
X
0.31
24655
0874-0623
132-0007-00
1 RING,RETAINING:0.575
ID
X
0.031
THK
91260
132-0007-00B
-12
132-0028-00
1 . INSULATOR,DISK:0.165
ID
X
0.625
OD
24655
0874-0700
-13
132-0121-00
1 NUT,PLAIN,KNURL:0.875-27 X 0.344,BRS
BRT
AL
80009
132-0121-00
-14
131-0889-00
1 LEAD,ELECTRICAL:STRD,22 AWG,40KVDC,26.5 L 80009
131-0889-00
-15
-----
-----
1
CKT
BOARD
ASSY:PULSE
INVERTER(SEE
EPL)
-16
131-1097-00
3 .
CONNECTOR,RCPT,:BNC,FEMALE,CKT
CARD
MT
24931 28JR220-2
198-3711-00
1 .
WIRE
SET,ELEC: 80009
198-3711-00
-17
210-0845-00
3 WASHER,FLAT:0.500
ID
X
0.625
INCH
OD,STL
89663 634-R
-18
129-0064-01
1
POST,BDG,ELEC:RED,5-WAY
MINIATURE
58474
BB10167G2BX
(ATTACHING
PARTS)
-19
210-0408-00
1 NUT,PLAIN,HEX.
:6-32
X
0.312
INCH,BRS
73743
3040-402
-20
210-0227-00
1 TERMINAL,LUG:0.141
ID,LOCKING,BRZ
TINNED
98335
GC7462M
-21
358-0181-01
1
INSULATOR,BSHG:RED
58474 BB10166G2
- - - * - - -
-22
129-0064-00
POST,BDG,ELEC:CHARCOAL,5-WAY
MINIATURE
58474
BINP
BB10167Gl3T
(ATTACHING
PARTS)
-23
210-0408-00
1 NUT,PLAIN,HEX.:6-32 X
0.312
INCH,BRS
73743
3040-402
-24
210-0227-00
1 TERMIANL,LUG:0.141
ID,LOCKING,BRZ
TINNED
98335
GC7462M
-25
358-0181-00
1
INSULATOR,BSHG:CHARCOAL
58474 BB10166Gl3BX
- - - *
-26
333-2362-00
1
PANEL,
FRONT:
80009
333-2362-00
-27
200-0278-05
1 .
PANEL,CABINET:FRONT
80009
200-0278-05
-28
132-0040-00
4
ADAPTER,
PANEL:
80009
132-0040-00
(ATTACHING
PARTS)
-29
211-0101-00
16
SCREW,MACHINE:4-40
X
0.25"
100
DEG,FLH
STL
83385
OBD
- - - * - - -
ACCESSORIES
070-3299-00
MANUAL,TECH:INSTRUCTION
80009
070-3299-00
6 @

/
/
/
/
/
/
/
'
',,
,.,,,-->
/
@ DELAY
STANDARD UNIT
!!
p

DC \NPU"T
,------------------
,----------------T-------~
I I I
l
T200
'TIOO
I
INV
(JOO C '200
GND ) lf ll.O..U.F l ,OI
R2.00
24.9
DL 100
_J
CH A I
NORM
IN x
I
~-------J
I
I
PULSE INVERIER
670-5246-0\
s -57<?'4 -o 0
~----------------~
L--------·-
-------
3 29'9-0 I
067-0832.-0l
--- --,
I
CH A I
f DE
1
LA'( DE~Yx
I I
L ____ _J
I CH B
!OUT
C.H A
fOUi
I
I
I
- - _J
DELAY STANDARD
UNIT